Suzuki Carry/Every/Scrum F6A Engine Rebuild

Sdílet
Vložit
  • čas přidán 24. 08. 2024
  • Suzuki multicab minivan's been running a bit hesitant and idling rough so I decided to break down my minivan's engine and see what is up. Only to know that just a defective fuel pump and a little carburetor tune-up was all causing the engine instability. Genius.
    This is a rear-mounted Suzuki F6A 660cc 12 valve gasoline engine, 2WD, and manual transmission, has various models but all are similar to each other, to list the models:
    Suzuki Carry/Every DC51B, DC51T, DD51B, DD51T, DE51V, DF51V
    Mazda Scrum DJ51B, DJ51T, DK51B, DK51T, DL51V, DM51V
    Engine parts and components can be purchased virtually everywhere.
    All the engine overhauling was done at TransXpress Auto Shop in Barangay Villakananga, Butuan City, Philippines.
    The whole engine rebuilding experience burnt a hole in my pocket and broke my heart into pieces but it is all worth it. Additional knowledge in automotive mechanic works is all about.

Komentáře • 316

  • @nhelmercsdiy7521
    @nhelmercsdiy7521 Před 4 lety

    Boss, pa help naman po..yung multicab ko po tumataas ang menor pag long drive or pag mainit na ang makina, di naman ganun kataas pero not normal po yung taas nya..s cold start po parang mamamamatay pag di mo binombq ng ilang saglit tas ok na..tas pag ng drive k ng mga say 20km mataas na ang menor nya po.. png deliver po nmin ng tubig at quarantine po kasi ngayon salamat

    • @chrclmnky
      @chrclmnky  Před 4 lety +2

      Same thing nangyari sa mc ko sir. Simple lang yan.
      - check nyo resistance ng ignition coil. Dapat malakas pa. Kung mahina na palitan ng medyo malakas
      - check spark plugs. Dapat yung manufacturer's recommend model yung NGK DCPR7E copper plugs
      - check air/fuel mixture. Adjust nyo sa pinakamalakas na settings after normal temperature while plugging the distributor lines in doing so.
      - check resistance ng ignition cables ninyo. Dapat nass wastong resistance lang kundi palitan na ng bago.

    • @nhelmercsdiy7521
      @nhelmercsdiy7521 Před 4 lety

      Thank you sir.. noted po.. God Bless..

    • @patriciocondez1908
      @patriciocondez1908 Před 3 lety

      @@nhelmercsdiy7521 magkano overhull

  • @brwpe7733
    @brwpe7733 Před 5 lety +3

    Great job. There's a lot of people afraid to to try what you just accomplished.

  • @herminigildojakosalem8664

    Looks like it is a well done job. Congratulations. I wish I had your knowledge and skill to work on my F6A engine as good as you did on yours.

  • @armandosamillanojr.420
    @armandosamillanojr.420 Před 4 lety +1

    boss pano ba pa tipidin sa gas,kasi yung multicab ko malakas kumain sa gas

  • @adriandiw
    @adriandiw Před 5 lety +2

    Paano po ang brake in process na ginawa nyo pagkatapos? Yung sakin din kasi, kakatapos lang ng general overhaul. Palit piston ring, lahat gasket at machine shop ang liner na bago din. Salamat!

    • @chrclmnky
      @chrclmnky  Před 5 lety +1

      Hello Adrian, thanks for the feedback. Normal use and city driving after overhaul. Taking notes of the gas milage and odometer readings. Change oil after 500kms, then after 700, then 1000kms. After that, drove a long distance trip. Gas milage improved from 8km per liter to 14km per liter unleaded.

    • @adriandiw
      @adriandiw Před 5 lety

      @@chrclmnky Okay sir, noted! Sana tumino na mga kei van natin. Hindi kasi biro ang gastos. Salamat ulit!

    • @chrclmnky
      @chrclmnky  Před 5 lety +1

      @@adriandiw You might want to check ignition coil and cables. That main part responsible for the engine running condition. Weak ignition coils will produce misfires.

  • @jirasakhiran79
    @jirasakhiran79 Před 5 lety +1

    I have a 1991 suzuki carry DB51T here in the US. I'd like to replace my carb with a remanufactured OEM one. Is that carb you have an aftermarket? If so, are they the Chinese aftermarket ones I see on Ebay, etc? Are they good quality and last long?

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Hello Jason, yes they are Chinese made and very cheap. Easy to start engine even on cold morning. And economical on gas too.

    • @jcweiz09
      @jcweiz09 Před 5 lety +1

      Don't buy chinese oem. Suzuki is Japan. It is better to have 2nd hand japan original than new chinese made parts for your engine.

  • @Cr0zzAlpha
    @Cr0zzAlpha Před 4 lety +1

    Pag install po ba aircon comoressor,palitan din po ba ung belt? Or inaadjust lng?thanks.

    • @chrclmnky
      @chrclmnky  Před 4 lety +1

      Palitan po ng mahabang belt upang ma contain ang compressor pulley

    • @Cr0zzAlpha
      @Cr0zzAlpha Před 4 lety

      @@chrclmnky ok po,sana makahanap ako pang f5a...hehe salamat po sa info..👍

  • @TheJonathandrumer
    @TheJonathandrumer Před 4 lety +1

    hello, this video is good thank you very much, ask this engine uses oxygen sensor!

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Thanks for the feedback. I don't know if it still uses an oxygen sensor.

  • @sawajiri100
    @sawajiri100 Před 2 lety

    Spray direct with Super Rust CalawaNg

  • @Borromeodura
    @Borromeodura Před 5 lety

    unsaon pag tangtang sa bolt nga gitauran or gihawiran sa timing built nga deli ma daut nga built kanang deli siya maputol, unsay mga pamaage kay mag-ilis unta ko oilseal sa gitauran sa built dapit sa head, maau unta naa moy video nga tinagsa gikan sa pagtangtang giunsa hangtod sa pagtaud sa makina ug sa pag timing sa built ,, salamat

  • @punx.l6449
    @punx.l6449 Před 2 lety

    Boss ilang inch ang bore ng f6a?

  • @johnamancio9103
    @johnamancio9103 Před 3 lety

    Itatanong ko lang po sa tungkol sa multicab namin Kasi tumatagas na ang coolant sa gawing likod ng crankshaft pulley Niya, ano po ba magandang gawin don, ano din po ba posibling sira Niya, salamat po.

    • @chrclmnky
      @chrclmnky  Před 3 lety

      Palit head gasket po sir. Top overhaul po.

  • @Mr.BusDriver
    @Mr.BusDriver Před 6 lety

    Boss picturebe sa pulley pag taod sa timing belt

  • @patrickdaledelossantos7272

    sir patulong naman po kailangan pa bo ba sukatin ang piston clearance sa bore bago po ang bore sleeve(standard ang size) tas piston ring standard din ang size . accurate na po ba yun pag pareho std

    • @chrclmnky
      @chrclmnky  Před 3 lety

      If standard bore, use standard piston and rings.

  • @bennsantiago3748
    @bennsantiago3748 Před 4 lety

    Magandang araw sir. Saan ba dapat magbaklas sa minivan cateye kapag gusto i-repair ang wiper link/motor? Una e binaklas ko dashboard hindi pala makikita o maabot ng kamay doon sa ilalim. Loose yata linkage o kung anuman dahil hindi na pantay ang hawi ng wipers saka maalog cya. Thank you po.

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Sorry sir di ko pa nasubukang baklasin ang dashboard area.

    • @bennsantiago3748
      @bennsantiago3748 Před 4 lety +1

      @@chrclmnky salamat ng marami. Gusto ko sana subukan e baka bigo na naman tulad noong una ☺.

  • @cypanconrad8973
    @cypanconrad8973 Před 2 lety +1

    Sa diin shop nyu master?

  • @PamVergara-ok3rb
    @PamVergara-ok3rb Před 6 měsíci

    ilan weeks po bago ma recon?

  • @elizabethgecalebenigno4663

    di nyo na binaba yung transmission sir?mahirap ba tanggalin ang engine kung rear van type ang mc?

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Total overhauled po to sir. Baba lahat. Pero dapat top overhaul lang sana ginawa ko. Really nothing to do with the crankshaft area.

  • @ianbabor3971
    @ianbabor3971 Před rokem

    Bos lht bh ng scrum cat eye ang radiator single tube lng? Pwed po bh or nty nyu n pong palitan ng double tube? Slamat bosing

    • @chrclmnky
      @chrclmnky  Před rokem

      One outlet and one return. The other is jus for heater purposes. You can plug it if not in use.

  • @rmbxcul
    @rmbxcul Před 5 lety +1

    boss himo og tutorial about sa multicab nindot lagi daghan kag folowers...

    • @chrclmnky
      @chrclmnky  Před 5 lety +2

      Helli Xcu, dili jud ko expert sa multicab sir, nag kahigayon lang na nag overhaul ako nalang ge document. Salamat sa pag bisita. 😊

  • @nelseaurelio5694
    @nelseaurelio5694 Před 5 lety

    Sir tanong lang po mayroon bang gasket sa may engine filter yong humahawak sa engine filter ibig kung sabihin

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Oil filter? May built in gasket na pag bumili ka.

  • @Rafel24ajj
    @Rafel24ajj Před 4 lety

    boss pwede DIY ang mag.change sa water pump or mag.ilis lang sa gasket? TIA

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Pwede ra man sir pero medyo hago ra ba mag tanggal ug water pump. Ug naa ka time ug kauban mo bungkag sa makina, makaya ra ninyo. Pero lingaw man pod.

  • @arielcunado7321
    @arielcunado7321 Před 4 lety

    ano gamit mong carb sir? parang bago ah

  • @edanygonia6425
    @edanygonia6425 Před 5 lety

    maayong buntag sir, newbie question mga pila ka adlaw mahuman mag overhaul butang ta walay mga ilisanan? multicab gehapon. salamat

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Good morning, depende sa mekaniko ug unsa ka skilled. Naay 5 days ra naa pod abtan duha ka semana. Kini naa sa video newbie pa ni nga mekaniko.

  • @lilyaldrin920
    @lilyaldrin920 Před 4 lety

    Anu clearance valve NG intake at exhaust 123 po ba ung firing order?

    • @chrclmnky
      @chrclmnky  Před 4 lety +1

      Hello Lily, sorry nakalimutan ko valve clearances. And sequence is 132.

  • @seidrickraymalinao3898

    Good eve sir, usually pila gastos mag overhaul anang suzuki carry? Salamat

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Good evening pod sir. Diri sa butuan ang charge usually sa top overhaul is 4800 labor only. Full overhaul is 6500 labor only.

  • @vser100
    @vser100 Před 5 lety

    Mga sir ano mo kya ang sira kpg nagsama ang tubig at langis sa radiator pero un engine oil wala tubig. Ano po kya sira nun... Carry multicab.. Po slmt po sa magreply

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Good day po sir. Malamang may leak na po yung head gasket ng MC ninyo kaya nagkaganon. Top overhaul and tune up po lunas dyan.

  • @alphonseiiicruz4788
    @alphonseiiicruz4788 Před 5 lety

    Sir ask lang kung pila ang gauge sa valve clearance sa multicab

    • @chrclmnky
      @chrclmnky  Před 5 lety +1

      Nakalimot na man ko sir. Ako nya basahon balik then ako e update diri.

  • @eljhaypascual9376
    @eljhaypascual9376 Před 4 lety

    Hello po sir...ano po sign pag cra na crankshaft ng f6a engine

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Crankshaft - you will hear knocking and pinging engine noise coming from below.

  • @sheila091581
    @sheila091581 Před 5 lety

    Good pm sir. Ask ko lang po presyo talaga ng surplus na carburetor ng f6a? Salamat po sasagot.

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Hello Sheila, surplus carburetors cost between 4-6 thousand pesos. I have tried using the Chinese version they performed well and good.

  • @ryanvitug7499
    @ryanvitug7499 Před 4 lety

    Mga boss ask ko lang magkano inaabot ng pagpapaoverhaul ng f6 engine?

  • @STEVEYDRAWS
    @STEVEYDRAWS Před 4 lety

    whats the ticking sound? can it be removed?

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Camshaft timing must jumped off a tooth. It happened to me.

  • @MrPeta-dx8lo
    @MrPeta-dx8lo Před 5 lety +1

    Ser, saan po kayo grumaduate may NC I at II din po kayo?

    • @chrclmnky
      @chrclmnky  Před 5 lety +1

      Hello Peter, no I didn't undergo any mechanical training. So no diploma or certification for me or something. 😄

    • @MrPeta-dx8lo
      @MrPeta-dx8lo Před 5 lety

      @@chrclmnky mechaniko po ba kayo? graduate kasi ako ng TESDA ng Automotive NC II ..

    • @chrclmnky
      @chrclmnky  Před 5 lety +1

      @@MrPeta-dx8lo im not a mechanic but can fix things no problem.

    • @MrPeta-dx8lo
      @MrPeta-dx8lo Před 5 lety

      @@chrclmnky taga saan po kayo? Hanap kasi ako ng work kahit helper lang....

    • @chrclmnky
      @chrclmnky  Před 5 lety +2

      @@MrPeta-dx8lo Butuan City Agusan del Norte

  • @solaimanbaimanot4180
    @solaimanbaimanot4180 Před 4 lety

    saan pala locesion mo boss

  • @diwisely2187
    @diwisely2187 Před 4 lety

    Normal ba na maging ganyan Ang tunod after NG overhauling, Kasi sakin after ovehaul naging ganyan, tapos taas pa kunsumo sa oil, unlike dun sa kaibigan ko, nagpaoverhaul Ganda NG tunog NG engine nya, kahit cold start Ganda andar.

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Hindi sir. Nag back job kami sa makina dahil baligtad ang head gasket. Eto na andar matapos mag back job. Pakinggan sa video sa link na to sir czcams.com/video/geK1GS4rQkI/video.html

    • @diwisely2187
      @diwisely2187 Před 4 lety

      @@chrclmnky panu maicheck na baliktad head gasket? Giclean ko Rin Ang pcv valve at ecv same pa Rin.

    • @diwisely2187
      @diwisely2187 Před 4 lety

      Egr pala

  • @coydog7902
    @coydog7902 Před 5 lety

    What’s the difference between an F6 and a V6?

  • @MariaJoyleeAraujo
    @MariaJoyleeAraujo Před 5 lety

    Sir if ilisanan ug crankshaft ang multicab pla kaha magasto tanan

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Barato ra man crankshaft sir. Labor and small parts ka madak an. Mahal pod mga gasket.

  • @al-lancabaruan724
    @al-lancabaruan724 Před 4 lety

    Boss saan ba mahahanap ung sensor ng water temp sa makina boss? Salamat po ng marami

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Sir marami dito surplus shops ssmin dito sa Butuan City

  • @gadurukinar6260
    @gadurukinar6260 Před 4 lety

    Sir ano pinag kaiba sa makina ng f6a srum and f6a ordinary engine? Sana po masagot nyo ako

    • @chrclmnky
      @chrclmnky  Před 4 lety

      F6A engine = pareho lang lahat yan. Magkaiba man ang transmission and engine placement, pareho lang talaga lahat yan.

    • @gadurukinar6260
      @gadurukinar6260 Před 4 lety +1

      Thanksyou sir :)

  • @chrisrojo5877
    @chrisrojo5877 Před 5 lety

    Sir unsay gamit nimo oil ug filter pag change oil? Salamat.

    • @chrclmnky
      @chrclmnky  Před 5 lety +1

      C-631 oil filter boss, then ang oil 20w-40 or 20w-50. Mas nindot daw if 15w40 SF/CF kay mas gaan.

  • @herminigildojakosalem8664

    Sir Charcoal Monkey good AM. I know this vid is years old by now but I am hoping I can still get an answer from you. I've just had my F6A engine worked on kasi nag-overheat. Now I worry because I'm not sure if the mechanic installed the head gasket right. My question, Sir Charcoal Monkey is: Aside from the engine's sound is there any other indicator that will show if the head gasket is baliktad? I am not familiar kasi sa tamang tunog ng F6A so I cannot go by sound alone. Kung baliktad ang head gasket, walang langis na nakakarating sa loob ng head cover? Will my Low Oil Indicator bulb light up? Papaano po ba? BTW, kabibili ko lang (second hand) itong unit ko kaya newbie talaga pa ako dito. In anticipation of your reply, I thank you now. Here is hoping you get to notice this. God bless po and thank you again.

    • @chrclmnky
      @chrclmnky  Před 2 lety +1

      Hello po. If baliktad ang pagkaka install ng gasket, instantly may malaking damage ang mangyayari sa camshaft, rocker arms, and upper block kasi walang langis na dadaloy. Then may malakas na ingay, parang grinding noise. Pwede namang buksan ang valve cover then paandarin. Makikita agad na may langis or wala.

    • @chrclmnky
      @chrclmnky  Před 2 lety +1

      Overheating issue must be the water pump impeller na pudpud na.
      Or hindi na bleed ng tama ang cooling.
      Or mas mataas air to fuel mixture, lean. Or overly advanced timing yung distributor.

    • @herminigildojakosalem8664
      @herminigildojakosalem8664 Před 2 lety

      @@chrclmnky - Big thanks for your prompt and very informative reply. "Pwede namang buksan ang valve cover then paandarin. Makikita agad na may langis or wala". I like this. It is exactly what I need. I hope my future questions (for they shall be many) would receive the same indulgence from you, Sir Charcoal Monkey. Big, big thanks again. Keep safe and God bless.

    • @herminigildojakosalem8664
      @herminigildojakosalem8664 Před 2 lety

      @@chrclmnky - Yes, Sir. Thank you.

    • @herminigildojakosalem8664
      @herminigildojakosalem8664 Před 2 lety

      @@chrclmnky- Thank you again. Learning a lot po from you. Thank you again, Sir Charcoal Monkey. Keep safe and God bless.

  • @rickyheruela8878
    @rickyheruela8878 Před 3 lety

    Pwede pa overhall parehas ani nga makina suzuki scrum f6A,pila budget?

    • @chrclmnky
      @chrclmnky  Před 3 lety

      Depende sa lugar ug sa mechanic.

  • @tupok718
    @tupok718 Před 4 lety

    boss may ganyan din me automatic nga lang ask ko lang kung pano pa babain ung temp kalahati kc lampas pa nga.nung nabili ko cya 1/2 ung temp tapos binilhan ko ng bago radiator tumaas pa

    • @gideonpineda8613
      @gideonpineda8613 Před 4 lety

      Thermostat lang yan

    • @prettyyu2716
      @prettyyu2716 Před 4 lety

      Tingnan mo yong hose nang radiator connecting to your engine baka may butas or nagcrack na. Replace mo nang bago.

  • @valerroljavier5289
    @valerroljavier5289 Před 5 lety

    Sir pwede mangutana nganong cgeg ka overflow akong carb nya iyang breather ga usok na

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Completo pa ba mga vacuum hoses ana sir? Basin ge pang tanggal na mga vacuum hoses ana. Then kung mag overflow ang carb, most likely ge abrihan or ge helabtan na ang carb.
      Mag usok na breather/filter, basin blown na ang cylinder head gasket ana.

  • @solaimanbaimanot4180
    @solaimanbaimanot4180 Před 4 lety

    boss pahilf lang po kas susuki transfromer ko ayaw mag istart boss

  • @Elzed649
    @Elzed649 Před 3 lety

    Idol magkano mag pa over hual multicab engine?

  • @emmanuellecastro3876
    @emmanuellecastro3876 Před 3 lety

    Hello sir. Sir may i ask po what is the difference between f6a engine and f10 in multi cab? Im planning to buy a fb type multi cab. So i want to know what is the bess among these 2? Thank you i hope you can answer my question

    • @chrclmnky
      @chrclmnky  Před 3 lety +1

      F6A = 3 cylinders
      F10A = 4 cylinders..
      By the way what is FB type?

    • @emmanuellecastro3876
      @emmanuellecastro3876 Před 3 lety

      So sir ano po mas maganda sa 2? I mean when it comes sa performance at patipiran sa Gas?
      FB type po na multi cab(close van)

    • @chrclmnky
      @chrclmnky  Před 3 lety +1

      @@emmanuellecastro3876 Why is it called FB?

    • @emmanuellecastro3876
      @emmanuellecastro3876 Před 3 lety

      Sa Pampanga sir usually FB type po twag. Prang L300 na pinaliit.

    • @emmanuellecastro3876
      @emmanuellecastro3876 Před 3 lety

      Family and Business etc..

  • @rhylianrealista5924
    @rhylianrealista5924 Před 3 lety

    boss unsay symptoms na need na e overhaul?

    • @chrclmnky
      @chrclmnky  Před 3 lety

      If worn out na mga piston rings. If more than 200,000km na needed na new cylinder sleeves.

  • @pisshiegne7185
    @pisshiegne7185 Před 4 lety

    laina lagi nag andar chief -naa pay problema ?

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Yes sir wa pa ni na tune-up pag first andar ani.

  • @joshuasaludar7705
    @joshuasaludar7705 Před 2 lety

    Boss leaking po crankcase namin boss ano po maganda gawin dito boss para mawala

    • @chrclmnky
      @chrclmnky  Před 2 lety

      Trace nyo lang po kung saan galing yung leak. May video ako na nag leak yung camshaft seal. - czcams.com/video/O0hHH7XbVYo/video.html

    • @joshuasaludar7705
      @joshuasaludar7705 Před 2 lety

      @@chrclmnky Tiningnan ko Boss eh dun kasi ng galing sa crankcase boss sa may bolt

  • @TheJonathandrumer
    @TheJonathandrumer Před 4 lety

    I have a suzuki jimny ja11 that comes with the f6A engine, and I'm spending a lot of gas, the engine has an oxygen sensor!

    • @chrclmnky
      @chrclmnky  Před 4 lety

      There are many factors when it comes to fuel economy on the F6A. First, you may want to check the ignition coil. It might be weak and not giving enough spark. May foul the firing.

    • @TheJonathandrumer
      @TheJonathandrumer Před 4 lety

      thanks for respond, but my engine dont use ignition coil because it use spark plug cable.

  • @justforsmile2386
    @justforsmile2386 Před 2 lety

    idol tanung lang po yung f5a po ba pwede po ba lagay sa minivan?

    • @chrclmnky
      @chrclmnky  Před 2 lety

      Pwede kung kasya transmission block

    • @justforsmile2386
      @justforsmile2386 Před 2 lety

      yung nga po tinatanong ko eh kung kasya or kung anu anu ang need e modified

  • @PlayMates_
    @PlayMates_ Před 4 lety

    Pila kahay magasto kong i overhaul ang makina boss? 12v f6a suzuki scrum

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Diri sa amo naas mga 7k ang labor sir.

    • @prettyyu2716
      @prettyyu2716 Před 4 lety

      Dito sa amin 3K ang labor general cleaning. Pag may damage sa crank shaft palitan mo nang surplus kasi genuine made in japan. Price nang crank shaft now is 6T to 8T. Labor is separate from the price of spare parts.

  • @abelnunez8188
    @abelnunez8188 Před 5 lety

    Tahimik wlang lagatak boss ah....

    • @jcweiz09
      @jcweiz09 Před 5 lety

      most gasoline engine hindi naman gaano lumalagatak. Diesel lang ang malagatak ang tunog

  • @oliverlucio764
    @oliverlucio764 Před 4 lety

    Sir alway running po ba talaga ang fan ng MC? TIA.

    • @chrclmnky
      @chrclmnky  Před 4 lety +2

      Nirekta kasi mga rad fan pag dating dito satin para safe sa overheat. Pwede mo lagyan ng switch o di kaya temp sensor switch fan ng MC ninyo. Sakin manual yung fan, nilagyan ko ng switch. E on ko nalang pag nag 10 oclock na ang temp gauge. Babalik naman to zero, then off na naman.

    • @herminigildojakosalem8664
      @herminigildojakosalem8664 Před 2 lety

      @@chrclmnky - Ingenious! I like this. I will do it too on my minivan.

  • @HappyAnimeMe1190
    @HappyAnimeMe1190 Před 5 lety

    Sir unsay gamit nimu pang limpyo? Unsa na nga spray gun?

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Compressed air ra man gamit sir then gasoline ge mix sa diesel para pang limpyo.

    • @chrclmnky
      @chrclmnky  Před 4 lety

      @xXpowerzoneXx gaming 50 50 ra sir. Pwede pod pure gasoline pero hang kaayos mata. 😂

  • @reymondgonzales9500
    @reymondgonzales9500 Před 5 lety

    Boss pila di sukod sa valve clearance sa intec ug exhaust sa scrum nga multicab?

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Nakalimot ra ba ko sir. E search and download lang palihug ang PDF sa Suzuki F6A 660C engine. Naa tanan didto mga data.

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Nara ang PDF sa Suzuki F6A 660C Engine - www.manualslib.com/manual/1207219/Suzuki-F6a.html
      E download lang, naa tanan diha data imo kinahanglan.

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Sa imo particular pangutana, mao ni nga page, about valve lash clearance on intake and exhaust. www.manualslib.com/manual/1207219/Suzuki-F6a.html?page=89&term=valve+clearance&selected=7

  • @STEVEYDRAWS
    @STEVEYDRAWS Před 4 lety

    ilang kilometro po sa isang litro?

  • @perfectsinner8311
    @perfectsinner8311 Před 6 lety +2

    Ngutana lang ko... akong multicab nga scrum kay mag over heat. Init siya ug makina. Dili normal ang iyang kainit. Ako na siyang gipa overhaul. Ilisan na nako siya ug connecting wire sa sparkplug ug cylinder head gasket. Ako nang gipaover haul ang rediator. Gipableedingan pa jud nako ang waterpump. Pero init pa gihapon ang iyang hinongaw sa makina. Ma feel nimo sa sulod labi na ug magdagan. Unsa kahay problema ani no? Advice lang be?

    • @chrclmnky
      @chrclmnky  Před 6 lety +1

      Good evening Sir, pila ang temp reading sa dashboard? if naa ra sa 12 o clock position or less, normal ra na sir. Then ang hinungaw nga init physically sa makina normal ra pud.

    • @perfectsinner8311
      @perfectsinner8311 Před 6 lety

      CHRCLMNKY mao ba... ngutana lang pod ko. Unsay maayo nga brand sa sparkplug para sa multicab 12 valve?

    • @perfectsinner8311
      @perfectsinner8311 Před 6 lety

      CHRCLMNKY naa gyod sa 12 0 clock ang temp. Ok ra diay na nga temp niya. Ok salamat kaayo sa imong rply bossing ha.

    • @chrclmnky
      @chrclmnky  Před 6 lety +2

      Ang nindot na spark plug para multicab is NGK DCPR7EGP (Platinum) tag 250 ang isa.
      Naay mas nindot, mas fuel efficient, low voltage needed, less fouling, NGK DCPR7EIX ( Iridium) pero mahal. Tag 600 each. Pero sulit kaau. Mas mo tipid ang fuel consumption and mas kusog ang kabig sa makina. Upgrade ko if maka tigom. Platinum ako gamit karon.

    • @perfectsinner8311
      @perfectsinner8311 Před 6 lety

      CHRCLMNKY ok salamat bossing

  • @jachuy234
    @jachuy234 Před 5 lety

    Sir patulong po . na tambay po kasi yung multicab namin ng 3 weeks tas ngayon na ggagamitin sana hindi umandar. nung maayo pa sya . pag yung susi naka ON umiikot yung radiator fan sa harapan tas ngayon wala na . at may tumutonog na parang spark sa makina nya. patulong po please

    • @chrclmnky
      @chrclmnky  Před 5 lety

      3 weeks stambay? You have to remove and have the battery recharged to a nearby battery center or repair shops. All battery juices were drained during the long non-usage.

    • @jachuy234
      @jachuy234 Před 5 lety

      salamat po sir. pero bat ganun sir kahit di gina gamit nag didischarge. ano po salution jan?

    • @chrclmnky
      @chrclmnky  Před 5 lety

      @@jachuy234 Disconnect negative terminal on battery if you are going to standby your vehicle for more than 3 days to prevent power draining.

    • @jachuy234
      @jachuy234 Před 5 lety

      wala parin sir. kakakuha ko lang ng battery . wala parin kuryente yung multicab . wala yung ilaw parang wala syang battery kahit meron

    • @jachuy234
      @jachuy234 Před 5 lety

      @@chrclmnky Boss. lahat po ba ng Suzuki Scrum may built in na Fuel Pump? o kaylangan mo pa bilhin ? napaka hirap po kasi pag na ubusan ka ng gasolina tas mag isa ka lang ang hirap pa andarin wala kasing nag lalagay ng gas sa carborador .

  • @johnpaulbustillo3792
    @johnpaulbustillo3792 Před 4 lety

    sir anong magandang langis sa multicab naten?

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Any engine oil with API rating SF, SG, SJ, SK, and SL

    • @johnpaulbustillo3792
      @johnpaulbustillo3792 Před 4 lety

      sir i mean ung viscosity po ba un? sample 10w40 po?

    • @chrclmnky
      @chrclmnky  Před 4 lety

      @@johnpaulbustillo3792 any will do. Marami na akong nakitang mga arguments tungkol nito on Facebook groups. But for me I prefer to use the thicker lubrication of 20w50 here in our very hot climate.

    • @johnpaulbustillo3792
      @johnpaulbustillo3792 Před 4 lety

      maraming salamat sir lastly sir san pobg part ng makina naka pwesto ang timing belt naten?

  • @matthewryanpampolina1836

    Sir magkano kaya ang computer box? bibili po kase ako multicab na 2nd hand pero yun daw issue, sira daw yon pero gagana daw kapag pinalitan. Salamat po ng madami sa tulong.

    • @chrclmnky
      @chrclmnky  Před 5 lety

      I'm sorry no idea about the price of the ECM engine control module or computer box.

    • @chrclmnky
      @chrclmnky  Před 5 lety

      What I can suggest is to purchase surplus vehicles from reputable sellers. There are many expert vehicle mods on facebook pages and also sells very good vehicles.

    • @herminigildojakosalem8664
      @herminigildojakosalem8664 Před 2 lety

      @@chrclmnky May ECM po pala F6A?

    • @chrclmnky
      @chrclmnky  Před 2 lety +1

      @@herminigildojakosalem8664 efi f6a meron ecm. Carbed, no.

    • @herminigildojakosalem8664
      @herminigildojakosalem8664 Před 2 lety

      @@chrclmnky -Again another valuable info from you. Thank you. God bless you and your loved ones.

  • @adrielsangre857
    @adrielsangre857 Před 4 lety

    Boss magkanu po pababa ng tranny muticab f6 automatic fi

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Sorry sir no idea.

    • @adrielsangre857
      @adrielsangre857 Před 4 lety

      Ndi po bakyo nagawa sir. Xnxa na po sa tanong

    • @chrclmnky
      @chrclmnky  Před 4 lety

      @@adrielsangre857 Di po sir. Pang manual lang na carburetor Suzuki F6A kaya gawin. Di po kaya automatic transmission and EFI.

  • @IcarusBartolata
    @IcarusBartolata Před 4 lety

    Good Day boss, Unsyt rason kaha ani dali ra gka basa akong sparkplug? Dili na daun mo andar...

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Weak na ang ignition coil sir. Pareho ra pod na nahitabo sa ako MC. Ge ilisdan nako ug maayo na coil wa na jud nag basa ang plugs.

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Read more on this link how to check ignition coils www.aa1car.com/library/ignition_coils.htm

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Kinahanglan ka mahibaw unsaon pag tester ug coils aron nig pili nimo sa surplusan ma pili nimo ang maayo kay di tanan maayo ila baligya.

  • @deotugaoen1
    @deotugaoen1 Před 6 lety

    Sir magkano ang nagastos mo parang need ko rin mag pa overhaul.ty

    • @chrclmnky
      @chrclmnky  Před 6 lety +1

      5500 labor (Butuan City rate)
      6500 parts (overhauling kit, piston rings, bearings, gaskets, cleaners, etc..)
      3000 extra expenses

    • @deotugaoen1
      @deotugaoen1 Před 6 lety

      ty sir

  • @nanzkielayson1919
    @nanzkielayson1919 Před 5 lety

    Boss asa inyung shop??

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Wala ko'y shop sir. Nia ra kos balay. Kini na video nag pa tabang ra kog mekaniko kay di madag ako ra isa. :)

  • @cragemmerich9611
    @cragemmerich9611 Před 4 lety

    please i need someone to teach me all parts of Suzuki mini bus both the names and pictures

  • @macoythegreat
    @macoythegreat Před 6 lety

    pila palit nmu sa carb boss? sinaw man gud kaayo :D

    • @chrclmnky
      @chrclmnky  Před 6 lety

      chinese made ni nga carb sir. 4300 ako palit.

  • @raquellacarion4743
    @raquellacarion4743 Před 4 lety

    Bos asa inyong shop naa mo dri Cebu Kay naa koy ipaayo nga multicab way kusug ang makina bos.

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Naa ko Mindanao, Agusan del Norte.

    • @farjanmamao4083
      @farjanmamao4083 Před 4 lety

      @@chrclmnky pila budget magpaayo sa enyu pariha anang enyu giayo

    • @chrclmnky
      @chrclmnky  Před 4 lety

      @@farjanmamao4083 Average overhaul fee diri sa area namo naa sa 6,000-7,000 pesos.

  • @animesenseinakama6474
    @animesenseinakama6474 Před 4 lety

    boss maka daog bani og aircon boss?

    • @chrclmnky
      @chrclmnky  Před 4 lety +1

      O naa man aircon ni sir sa original. Naka attach pa ang compressor ibabaw sa makina nig taod.

    • @animesenseinakama6474
      @animesenseinakama6474 Před 4 lety

      @@chrclmnky salamat boss last question boss maka daog bana if butangan nako power steering boss. plano kc nako mag ilis makina sa akoa multicab

  • @freakyjerkus
    @freakyjerkus Před 6 lety

    naunsay nahitabo sa imong makina bai ? na overhaul mn lge ?

    • @chrclmnky
      @chrclmnky  Před 6 lety

      Hinay na compression sir then sige lang fouling mao ako ra ge overhaul. Curious pud ko sa overhauling process. 😄

    • @freakyjerkus
      @freakyjerkus Před 6 lety +1

      unsay guba pod nkita ?

    • @chrclmnky
      @chrclmnky  Před 6 lety

      Luag na mga piston rings ug oil seal mao mo sulod sa combustion chamber. Lingaw pud auto mechanic sir.

    • @freakyjerkus
      @freakyjerkus Před 6 lety +1

      hahaha lingaw tan awon pero mgtrouble hasul :D hehehe

    • @mkakatishomishomi1974
      @mkakatishomishomi1974 Před 5 lety

      @@freakyjerkus blok and ring peston you new woy oil in exhost

  • @jaysonilagan5753
    @jaysonilagan5753 Před 3 lety

    Sir saan location nyo

  • @winhadjiri634
    @winhadjiri634 Před 5 lety

    Good day boss, magtanong lang ako pano po ba tatanggalin yung pulley sa taas? kasi po pag inaryahan ko sumasama yung crankshaft.

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Sorry sir no idea, yung mekaniko ang gumawa. But I think mayron yang lock type tool na available to lock the gear.

  • @johnpaulgoloran472
    @johnpaulgoloran472 Před 3 lety

    location nimo boss....asap.

  • @alexford1074
    @alexford1074 Před 4 lety

    Sir pa help naman po sa problem ng multi cab ko laging ma carbon ng itim ang spark plug kahit bago tas after ng mga ilang days may isa o dalawa napopudi sa sa mga spark plug. ok naman po mga timing ng makina bago po mga high tension wire at diatributor cup sana matulongan nyo ako salamat

    • @chrclmnky
      @chrclmnky  Před 4 lety +1

      Check nyo po ignition coil sir baka mahina na. Use multimeter in testing your coil. Also you might want to replace fuel filters, there are 2, at the fuel send and at the fuel return. Re check your high tension wire for its accepted resistance values. Commonly nasa electrical lang talaga yan.

    • @alexford1074
      @alexford1074 Před 4 lety

      Salamat sir check ko po lahat yan sana maging ok na un na nga cguro ignition coil at mga fuel filter kasi ala din siya lakas hirap na hirap sa akyatan

    • @chrclmnky
      @chrclmnky  Před 4 lety +1

      @@alexford1074 check my latest video as well. About fuel pump and filters czcams.com/video/m6CesuqxuLQ/video.html

    • @alexford1074
      @alexford1074 Před 4 lety

      Primary coil 1.4 ohms. secondary coil 28.18 k ohms yan po reading ng ignition coil sir. palitin naba ang ignition coil ng mc ko sir

    • @chrclmnky
      @chrclmnky  Před 4 lety +2

      @@alexford1074 palitan na yan sir. Dapat below 13k ohms lang 2nd coil. Magdala po kayo ng multimeter kung bibili ng surplus sir. Piliim nyo mas mababang resistance, tyak malakas ang power nun

  • @boracay12
    @boracay12 Před 5 lety

    That tiny engine to power the van , :( , just to small , a 1.3 would be great .

    • @chrclmnky
      @chrclmnky  Před 5 lety +2

      Hello Paul, actually the tiny engine so powerful. They use these Suzuki F6A's for public transport that could carry 12 people.

    • @boracay12
      @boracay12 Před 5 lety +1

      @@chrclmnky the newer ones are better ? my brother inlaw had a van , it could not even keep its speed going up a hill on the national road out of cebu . He sold it finally . We looked at newer vans , he didnt trust them and recommended agsinst them , we bought a low milage honda city , local made , with a 1.3 hood on gas and plenty of power , but i like the style of the van , custom 4wd . Da64
      , just that little engine ;(
      .

    • @jcweiz09
      @jcweiz09 Před 5 lety

      it's a powerful gasoline engine. In Japan it is used as a transporter of goods in the field to the market w/c can load up to 350Kg but here in Philippines it is loaded like more than what it's max kg and they add thicker leaf suspension. Here are some modified body you can view → czcams.com/video/KkrTgOammgU/video.html :)

  • @johnhenryquilinguin2409

    Pila siguro kung e overhaul ang landy nga van boss.

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Ang overhaul labor diri naa sa 6-7k pesos diri sa Butuan sir. Small to medium petrol vehicle. Pero di ko sure sa kana nga vehicle sir. Nag pa overhaul ra pod ko ani.

    • @falabsgetoffecial5065
      @falabsgetoffecial5065 Před 4 lety

      Pela pangayu pa overhole sir

    • @chrclmnky
      @chrclmnky  Před 4 lety

      @@falabsgetoffecial5065 mga ingon ana

  • @NotSoCrazyNinja
    @NotSoCrazyNinja Před 5 lety

    Something is not right with the finished rebuild. The engine is not supposed to sound like that.

    • @chrclmnky
      @chrclmnky  Před 5 lety +2

      Yes sir, the engine blows. The rebuilding was actually done twice because head gasket was installed in reverse. Didn't had a video recording of the 2nd engine test. So my bad. :(

    • @keithcitizen4855
      @keithcitizen4855 Před 5 lety +1

      Interesting pick up, a capable fellow no doubt about that.

  • @captainbotbot2151
    @captainbotbot2151 Před 5 lety

    Pila kaha ni ka kilo y labot transmission. Ug pila ka hp ni nga engine. Anybody

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Suzuki F6A - 657 cc (40.1 cu in) 65 mm × 66 mm (2.56 in × 2.60 in). A four-cylinder version (the F6B) was also developed.
      Max.power (Net): 60 HP (44 kW) at 6000 rpm

    • @captainbotbot2151
      @captainbotbot2151 Před 5 lety

      @@chrclmnky thank u sir. Sa imu estimate sir paghuman nimu assemble ma aswat xa isa ka tawo? Kaabot kaha xag 50 kilos?

    • @chrclmnky
      @chrclmnky  Před 5 lety

      @@captainbotbot2151 Di madag isa ka tao sir oi. Kung naa mo chain block mas maayo para dali ra trabaho. Kung wala, kinahanglan at least 3 ka tao mo alsa nig taud balik.

    • @captainbotbot2151
      @captainbotbot2151 Před 5 lety

      @@chrclmnky ah ic. Nangita man gud ko unsa makinaha mai power to weight ratio nga 1:1. So mga 100kg kaha ni makinaha? Y labot transmission ha

  • @reynaldogalvez787
    @reynaldogalvez787 Před 5 lety

    Mrning boss.. Unsa my problema ani ako every nga gi overhaul alisdan ug head tas human na tanan unya pagpaandar dli mn mo vacuum ang intake tas individually check sa system gikan intkae manifold open tas testing sa head wla ghapon maong utro npud ang ako mekanik pag open tanan pati gasket alilis ug bag o tas nabuo na cya unya g start mao lng ghapon dli ka boto pra andar.. Redondo ra taman.. Matic ni cya nga K6A.. Salamat daan sa imo idea boss😊

    • @chrclmnky
      @chrclmnky  Před 5 lety

      - Basin weak na ang ignition coil ana. E check gamit multimeter. If taas na ang resistance, weak nana imo ignition coil.
      - Nag compression test ba mo? Dapat naay compression tester imo mekaniko.
      - Basin wala sa saktong timing ang makina. Dapat naa pod timing light ang mekaniko para ma adjust sa saktong timing.
      - K6A engine diba EFI na? Basin wala na sa saktong function ang computer box ana sir.
      Medyo kuti ayohon ang mga EFI kaysa carb engines. Dapat advance na pod imo mekaniko dili lang kato scientist ang agi.

  • @sandeepsingh-ij8yl
    @sandeepsingh-ij8yl Před 4 lety

    Muje ko koi super carry diesel engine k sabhi parts ki list with price bata skta ha , I need urgent

  • @marcocarrington914
    @marcocarrington914 Před 6 lety

    1 1600 Suzuki pick up

  • @dzcgewaadg571
    @dzcgewaadg571 Před rokem

    Whataap umber

  • @imranciycle7293
    @imranciycle7293 Před 5 lety

    Engine number

  • @johnpaulgoloran472
    @johnpaulgoloran472 Před 3 lety

    location nimo boss? need nako now..

    • @chrclmnky
      @chrclmnky  Před 3 lety +1

      Butuan City sir

    • @johnpaulgoloran472
      @johnpaulgoloran472 Před 3 lety

      @@chrclmnky ayay taga butuan pud ko boss, taga golden ribbon ko, south montilla blvd atbang freemethodist church...pero dia ko cebu ron..

    • @chrclmnky
      @chrclmnky  Před 3 lety

      @@johnpaulgoloran472 ayos.

    • @johnpaulgoloran472
      @johnpaulgoloran472 Před 3 lety

      @@chrclmnky naa man gud trouble sa akong multivan scrum, kanang in between sa left og right sign signal ni siga nya kalit lang dili na mu andar bisag ako na gipalitan og spark plug

    • @chrclmnky
      @chrclmnky  Před 3 lety

      @@johnpaulgoloran472 kuha ug multimeter, test the high tension wires and ignition coil.

  • @liwatabanao6764
    @liwatabanao6764 Před 4 lety

    Brand new carburetor malakas sa gusulina yan.. suki mo gasulihan nyan..

    • @chrclmnky
      @chrclmnky  Před 4 lety +1

      Ok lang naman. Average of 12-14 km/L of unleaded gasoline consumed.

  • @imranamil1423
    @imranamil1423 Před 5 lety

    Akong multicab pag ka human na overhaul..dili na kusug mudagan pag ka change gear sa tersira patay ang makina..unsa cgro ang problema didtu ok man ang timing pero wala man ang iyan kusug mo dagan.

    • @chrclmnky
      @chrclmnky  Před 5 lety +1

      Brother Imran, salamat sa pag tan-aw. Pareho ra ta ug problema after overhaul. It turns out guba na ang ignition coil. Ako ge ilisdan na ok na dayon. Ang spark plugs ako ge upgrade to NGK platinum.

    • @imranamil1423
      @imranamil1423 Před 5 lety

      @@chrclmnky mao ba bro..cgoro akoa pud guba da cgro ang ignition coil..pa check nlang nako sa mechanic..3 days from now ra to nkagawas akoang multicab..hay problema na pud imbes na mo condition naluya man.

    • @chrclmnky
      @chrclmnky  Před 5 lety +1

      @@imranamil1423 ilisdi pud ang mga ignition cables. naa man baligya set ana. Pwede ra ikaw mo tan-aw sa ignition coil. Sayon ra kaayo mag test ug naa ka multimeter. Dali ra man tang-tangon. Mao ni full tutorial on how to check ignition coils. www.aa1car.com/library/ignition_coils.htm

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Mao na kasagaran problema sakyanan ang electrical. Gamay ra mechanic na kahibalo mo test ug auto electrical labi na sa ignition na part.

    • @imranamil1423
      @imranamil1423 Před 5 lety

      @@chrclmnky pila ang price sa set bro...mao jud bro gamay kaayo kabalu sa multicab..lisud man pud ang multicab..salamat bro ha akong tan awun ang tutorial..

  • @brylledaone7872
    @brylledaone7872 Před 3 lety

    Boss ilang oras po Ang aabotin sa pag assemble nang makina sa f6a

  • @gi4689
    @gi4689 Před 4 lety

    Boss, may kano bayad sa pa overhaul sa makina sa f6a suzuki?

    • @chrclmnky
      @chrclmnky  Před 4 lety +1

      Wala pong kano sir pinoy po lahat.

  • @alphonseiiicruz4788
    @alphonseiiicruz4788 Před 5 lety

    Sir ask lang po pwede po ba ibalik ang thermostat sa multicab same unit po tayo nag multicab sir

    • @chrclmnky
      @chrclmnky  Před 5 lety

      Yes sir pwede naman but I suggest to remove it. And make your radiator fan auto-sensing.

    • @alphonseiiicruz4788
      @alphonseiiicruz4788 Před 5 lety

      Aw okay sir salamat daan

    • @alphonseiiicruz4788
      @alphonseiiicruz4788 Před 5 lety

      Ngano man sir mo overheat ang multicab kung naay thermostat

    • @chrclmnky
      @chrclmnky  Před 5 lety

      @@alphonseiiicruz4788 Basin depektoso nga thermostat sir. Advisable e remove nalang sir.

    • @alphonseiiicruz4788
      @alphonseiiicruz4788 Před 5 lety

      Aw okay sir salamat sa info sir

  • @samplacido137
    @samplacido137 Před 4 lety

    boss alam nyu fuel consumption ng multicab?

    • @chrclmnky
      @chrclmnky  Před 4 lety +1

      Average is 12-14 km/L boss.

    • @samplacido137
      @samplacido137 Před 4 lety

      @@chrclmnky salamat boss, alin ba maganda? scrum or carry? plan ko kasi bumili.

    • @chrclmnky
      @chrclmnky  Před 4 lety

      @@samplacido137 scrum is actually just a term used by Filipinos for the Suzuki Every minivans having a model number that starts with DE, ex DE51V. If you like to get a new vehicle I suggest to buy a brand new one to save yourself from headaches out of these surplus vehicles.

  • @arielcunado7321
    @arielcunado7321 Před 4 lety

    ano gamit mong carb sir? parang bago ah

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Bumili ako ng bago sir, pero ininstall ko ang original. Mas magaling pa din ang auto choke function ng original carb.

    • @arielcunado7321
      @arielcunado7321 Před 4 lety

      @@chrclmnky ayoz lang ba yung brandnew carb compare sa surplus?

    • @chrclmnky
      @chrclmnky  Před 4 lety

      @@arielcunado7321 Di pa ba nasagot sir?

  • @linuxboy007
    @linuxboy007 Před 4 lety

    Boss ano po ang dahilan bakit nasisira ang flywheel ring gear?

    • @chrclmnky
      @chrclmnky  Před 4 lety

      Sorry sir di pa ko naka experience ng ganung problema kaya di ko pa alam. Pasensya na.