Arrma Typhon Mega UPGRADED "I broke the same part twice!!!"😲 WATCH THIS!!!
Vložit
- čas přidán 22. 05. 2020
- If you're thinking about buying any of the Arrma Mega 4x4's to upgrade to brushless, then you'll want to watch this video. There are a few minor upgrades that you may need to do (from plastic to metal) to get the best performance and durability. I broke the same part twice in two runs... IF YOU have any other suggestions for Mega upgrades, please leave in the comments section below. As always, THANKS FOR WATCHING... Don't forget to subscribe and hit that "🔔" next to the subscribe button to get notified when new videos are posted. "I love bashing with you guys!" -djsoulforce!!!
*Arrma is a trademark of Horizon hobbies and they are the exclusive distributor of Arrma products. Go to www.HorizonHobby.com for more info.
👉I got my Typhon Mega from: www.AmainHobbies.com - $219.99 FREE SHIPPING
👉Typhon HD Steel Input Gear - AmainHobbies - $4.99 - Click here: www.amainhobbies.com/arrma-hd...
👉Arrma official website, CLICK HERE: www.Arrma-rc.com
Music:
Soul Groove by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/
A SOUL FORCE PRODUCTIONS
MAY 2020
Email: SoulForceKites@gmail.com - Věda a technologie
After I'm done playing around with this Typhon Mega, I think I'll just go ahead and get the "real" 6S Typhon. It comes from the factory built ARRMA TOUGH baby 💪🏿!!! Thanks for watching guys!!! -djsoulforce!
Nice upgrade. Good explanations etc. Making it happen. Plastic gears always a no no. Always order a steel when you order the truck etc. Very nice.
Thanks Phil for stopping by and watching. Also, thanks for your feedback brother!!!
I have both the 3s and 6s version!! Bought the 6S not 2 weeks after the 3S purchase!! Was just sick of breaking the plastic pieces all the time!! The 6s is a beast!! I’ve had some pretty serious crashes too and all I’ve done is bend a rear shock tower and a shock tower screw!! Arrma tough
Arrma has a pretty nice business model; sucker you in with low cost, cheap, built to fail models then sit back and wait for you to buy the 6s. Next they laugh as you spend even more money upgrading that one...
Teckno just watches quietly shaking their head...
Great job like always, thank you.
THANK YOU AGAIN brother for your feedback. I appreciate your support & thanks for being a long time subscriber!!!
Good decision. Love Typhons.
Thanks for watching and your feedback!!
Just doing the same upgrade. Great info thanks
Thanks for watching and your feedback. Good luck with your upgrades!!!
Thanks for the info!
Thank you for watching and your feedback!
Yeah....... You have always like to put stuff to the "Test"!LOL!🤣👍
You got that right! That's what I do, lol!!!!
I'm sure you'll successfully replace them all my friend because I know you have the patience and motivation. Thank you for sharing. Wishing you a nice and safe weekend. 👍👌
Thanks buddy, I hope you have a nice weekend too!!!
That truck looks sweet. Nice upgrade buddy. 👍👍👍👍
It's sweet, but I'm not done with her yet. She's not fast enough, but I'm getting there! Thanks for watching Ray!!!
Loved it😁
Thanks for watching buddy, I appreciate it. Stay safe!!!
Sorry about your part breaking twice on you, but I'm glad you able to upgrade to metal parts. You really have really put a lot of work into this truck. And I loved ramps you were jumping off, very cool. This truck is a lot of fun. Happy Memorial Day.
Thanks Ron! Happy Memorial Day weekend to you too. I'm sure you're planning a shoot at the beach, can't wait to see how different it looks this year! POW!!!
You did a great job getting her up and running
Thanks bro, I learned most of this from watching your videos! I'm going to eventually get the Typhon 6S, this one is still NOT FAST ENOUGH for me, lol!!! Thanks for watching brother!!!
Your right they are 1/8 scale buggy!! But built on a LWB 1/10 short truck. Chassis!! The Senton to be exact!! Great video
Thanks for watching and your comments & feedback. Happy bashing bro!!!
Thanks for listing the part
You're welcomed. Thank you for watching!!
I think that I would have maybe upgraded after the first gear broke. Good job with the upgrade DJ. POW!!!
You are absolutely right, but I couldn't find (or didn't know about it) the metal gear when the first one broke. Now I have a couple of extra plastic spare, lol!!! Thanks for watching brother!!!
Wow that’s crazy they used a composite input gear and no metal. Well glad you have it up and now better then before. Be safe DJ
Thank you, I will. Same to you buddy!!!
SOUL FORCE QUADS your welcome
Like the lime green color. Time to send the drone up at the field.
Coming soon bro, stay tuned!!!
Its always about finding the next weakest link. Lol. I love how that car jumps. So balanced.
😎👍
You got that right! Thanks for watching buddy. STAY SAFE, HAVE FUN!
I noticed the Typhon Mega V3 that I bought used has metal input gears. Does it come with metal input gear in the Mega V3 or did the previous owner upgrade it himself?
More than likely, he did, but I can't be sure. You'll have to ask him!!! Thanks for watching and good luck!!!
Hey man! Do you already know if it was updated by owner or just by Arrma in factory to metal input?
Nice Vid. Good info I’m upgrading my mega got the 3s version motor, motor mount and spur gear. Nice 32 pitch for durability. Didn’t realize those inputs and outputs were plastic deff upgrading those thanks. My only issue is the shocks real flimsy. Can’t handle the power.
Good point, you're right, the shocks are flimsy and they also leak! Thanks for watching and your feedback!!!
Yeah it advertise Arrma tough but not DJ SOUL proof, 😁😁 metal gears and parts upgrades is a must if bashing, cool video 👍🏾😎👍🏾
Very true brother, lol. Thanks for watching and the support! POW!!!
Good info. I think it's better to just go straight to the 3s model for a few bucks more.
You are 100% right my brother, lol 👍🤣💯!!! For me, I bought the Mega with the intentions to upgrade it with spare parts I had laying around the house. I'm gonna get that 6S version one day soon!! Thanks for watching bro!!!
Great video 👍🏿 . Question did you have to change your slipper to t57?
No, I didn't for this modification. However, right after making this video, the slipper clutch burned out on me. You can see it in this video - czcams.com/video/ay5R8SBnxug/video.html (I was later told to loosen up the slipper clutch if you upgrade to brushless) Afterwards, I replaced the spur & pinion to the same as the Arrma Granite 3S BLX gears and 3S BLX motor - (just posted an hour ago) czcams.com/video/1lWMYOkj3hg/video.html It's running great now!!! Thanks for watching and your question.
@@DJSOULFORCE got you that's exactly what happened to me lol that's for the video 👍🏿
Hey thanks for this video! Can you tell me exactly which model of Typhon Mega you have? Is it the newest v3 model ARA4206V3? I'll be taking mine apart soon to see what it has inside. I am brand new to this hobby so I need some tools still, but your video has helped give me some more perspective. Thanks!
Thank you for watching and your question. My Typhon is last year's version. I think the version 3 probably has upgraded metal gears, not sure though!
I've looked all over and I can't find any info on what's new or upgraded on the ARA4206V3. Actually I just found this "The TYPHON™ 4X4 MEGA RTR is DESIGNED FAST, DESIGNED TOUGH - built for exciting bashing speeds and extreme, all-terrain durability. New features that enhance its unstoppable performance include a stronger chassis and retained hinge pin plates; steering with more clearance for stones; a castellated slipper pad and sliding gear mesh; and rubber-shielded bearings throughout.
The Speed Buggy now also includes the Spektrum™ SLT3™ transmitter and SLR300 receiver. The transmitter is ergonomically designed for long periods of fatigue-free bashing and has a foam wheel for precise fingertip control plus an improved hand grip and trigger feel. New bashers will be able to set throttle limits at 50% or 75% until they are ready to use the full speed potential. The SLT3™ is compatible with Tactic® SLT™ receivers to run other RTR vehicles you may own, and includes a third channel to control optional features such as lights and winches on models that have them. "
@@Pmason718 Check out Jay Tee R/C channel, I think he did a comparison video - czcams.com/channels/nnGALgMKGZrzN-lf1AosYw.html
nice ramping bro!
whered you find yours?
im looking at similar ones on bamazon....
I found the ramps on Dick's Sporting Goods website! Good luck buddy, thanks for watching!!!
Part number would of been great
Link to buy the part is in the description of the video above. Click on "See More"
www.amainhobbies.com/arrma-hd-input-gear-17t-ara310773/p707201 Thanks for watching!!!
So far I have not broken any of the input gears when I switched to brushes
Thanks for the feedback bro and for watching!!!
i was going to buy on until i learn its plastic and ill not be paying 500 or what ever fer a 6s version. iol never use but 2s or 3s .just composite gears it just silly to me . i would just upgrade all to meat diffs its like 50 each and you be good heck i may get a roller but that be only way i buy one .nice rigs in the right set up .i only have is a few 1/10 imex samurai .aka vrx blast SCT .well and a imex vrx dart. i may just convert one SCT into a buggy
Thanks for watching and your feedback!
Do you need 2 input gears or only 1?
There's only one INPUT gear. On the opposite, there are two 'output' gears. The output gears are plastic also but I haven't changed mine yet. "If it ain't broke, don't fix it!!!" Lol, thanks for watching bro. Good luck!!!
You have to get that the center support brace !!!
I didn't know they made a support brace for the Mega versions! I'll check it out, thanks!!!
Yea try’s taking a pic but don’t know how to post it up hrrr
Have you gotten the hd slipper clutch yet
No, I have not. I've replaced the broken input gear, but at the end, I've decided to just buy the Typhon 6S. It was fun building this car up to 3S, but I know that I'll be breaking more stuff in the future!!! Thanks for watching and your question.
SOUL FORCE QUADS yea good idea cuz I got the new motor mount and the hd slipper and now the red block won’t fit back in smh
Is this the v3, or does the v3 mega I just bought have this upgraded already?
This is a version 2. I was told that the V3 has been upgraded at the factory! Thanks for watching and your question.
@@DJSOULFORCE thanks!
Just bought a 3s and half way through my second battery while running on %75 speed it's making a wine somewhere in the rear..
Can anybody tell me what I may be?
This is my first car.
Thnx in advance
Sorry to hear about your car having issues on the second run. That noise could be a number of different things. Sounds like you pinion gear could be loose or stripped OR it could be a lack of oil in the rear differential. You'll have to do some troubleshooting and some research on how to fix. Good luck buddy, thanks for watching.
young folks got it easy YT video one everything its a learning curve but that how it is and worth it rc is easy and to be the handy guy around is lots of studying no collage needed just desire and a apprenticeship can not hurt and fixing and messing up but its fun to know one can fix a house a car or wood work basic on most but great at sum
How do you turn it into a brushless motor?
You must first upgrade the motor and ESC (electronic speed controller) to a brushless combo. See the description of this video for more information. Thanks for watching!!!
@@DJSOULFORCE thank you!
@@DJSOULFORCE where can I buy the same one as you?
Love life, Love you ;) stay safe
Love you too Mark. Thanks for your support over the past 4 or 5 years now. You are a true friend! I hope you're doing well buddy, stay safe!💥POW!!!
@@DJSOULFORCE Holly shit, that long? POW !!!
Get back in the Air, miss your reviews
I'd love too, but the Chinese stopped sending me (good) stuff to review. They only want to send me junk, toy drones. I'm getting tired of trying to make a P.O.S. (piece of s@#t) drone look good on camera!!! LoL!!! Thanks for watching buddy and your feedback! I'll be doing some 'throwback' drone videos this summer!
Hey what all parts did you get ..can I get the parts number
Please check the description of this video for the parts used. Since this video, I also upgraded the spur and pinion gear (no part numbers handy - sorry) to the same spur/pinion as the Arrma Granite 3S BLX. To upgrade the spur/pinion gears, you will also need to buy the metal Universal Motor Mount to get the proper mess. Good luck, thanks for watching!!
@@DJSOULFORCE theres no part number for the output gear
@@95dmike Go to AmainHobbies.com. Type in the search box for your model, they will show you parts, pictures & part numbers for most Arrma vehicles. Good luck!!!
Just say no to music in videos
Thanks for the feedback, but who doesn't like music? Would you prefer a "silent movie?" LoL!!!
SOUL FORCE QUADS I come to hear the rc
I don’t go to a concert to hear an rc lol