Everything is changing in the Off-Grid Garage. Just kidding... Am I?
Vložit
- čas přidán 20. 04. 2024
- Today's video will be the start of a new series of... different videos here on the Off-Grid Garage CZcams Channel. I call it the 'Garage-Transformation' Series. It will be a big project so you will see such videos from time to time...
In this first video, I remove some of the existing roof insulation (very yucky and disgusting!). The roof underneath looks so clean, I really like it.
I also build a metal shelf out of some solar rail off-cuts and old brackets to hold up a small network cabinet. What has all this to do with solar and battery stuff you will ask... Let me explain.
Brush Plate (haha!):
off-grid-garage.com/electric-...
4u Network Cabinet. Great to clean up your network mess! Like in my garage...
off-grid-garage.com/accessories/
SMLIGHT SLZB-06M, Ethernet to Bluetooth & Zigbee proxy for Home Assistant:
off-grid-garage.com/accessories/
My unpluggedEV CZcams Channel:
/ @unpluggedev
Please subscribe and join me on my journey of the Off-Grid Garage!
For more information, please check out my website with links to all the batteries, materials, devices and products I have used in my videos: off-grid-garage.com
The 'Buy me a Beer🍻'-link is here (on the website, scroll all the way down):
off-grid-garage.com Thank you for your support!
I'm also drinking coffee (not really). But hey, I'm into Smoothies, so that counts, right? www.buymeacoffee.com/jqtgwc3mp3
You can also click on the Thanks button under the video to support the channel. Thank you, if you have already!
AND, you can now become a member of this channel (and receive additional content. From time to time...):
/ @offgridgarageaustralia
T-Shirts, caps, mugs and more in our merch-shop:
off-grid-garage.com/merch
**** These are the batteries you are looking for ****
🔋➡EVE LF280/304 LiFePO4 cells 3.2V/280+304Ah: off-grid-garage.com/batteries/
🌞➡Solar charge Controllers, Inverters and accessories: off-grid-garage.com/solar-cha...
🔧➡Tools, Analysers and Testers: off-grid-garage.com/equipment/
📈➡ Battery Tests and Results: off-grid-garage.com/battery-d...
🔌➡Batteries, charger and accessories: off-grid-garage.com/batteries-3/
⚡➡Cables, Inverters and Electronics: off-grid-garage.com/electronics/
The Sunfunkit DIY battery. Great product to build your own 12V battery. Use OGGA at checkout to get 6% off. More info here: off-grid-garage.com/diy-kits/
Video review: • The Sun Fun Kit Experi...
Best prices for Victron gear in Australia: Auto Parts Co has you covered.
www.autopartsco.com.au/?pd_pr...
(they have 4WD parts and accessories too)
Take a live sneak peek at the Off-Grid-Garage in the Victron VRM World (link at top of the page):
off-grid-garage.com/victron-c...
Here is my Tesla referral link, if you want to buy any Tesla accessories or even order a vehicle. This is a great way to support my channel. Thanks a lot to everyone who have used it so far 🙏 www.tesla.com/en_au/referral/...
My other (German) CZcams channels:
/ offgridgarageaustralia
Please don't leave any links in your reply. CZcams will not publish your comment in this case.
If you decide to send me an email, I really appreciate your time and effort for doing this. However, please consider leaving a comment under my videos instead as I may not be able to reply to your email due to the sheer number of messages I'm receiving. - Věda a technologie
3d print end for the rails.
Yeah, exactly my thouths as well :)
Yes, it's a very weird shape and profile though. Maybe some flat end plates and I glue them on for the sake of simplicity.
Just something about work. I can watch it all day.
It’s a lot easier than doing the work!😂😂😂
Hahaha, I bet you can watch it all day long. There is heaps more to come😅
Maybe a small tip, choose a small 12V lifepo4 in your cabinet as well, this gives you a UPS when changing your power wall, and it can handle surges when powering up your cabinet.
You will get problems with condense inside when it is cold outside and warm in the shelf. You will get drops on the metal roof
17:12 He made a point of saying there was plenty of room above the rack for the new insulation, so the potential condensation issue will be addressed. 👍
Curious to see if he allowed enough room for the door of the rack to clear the steel support holding to light above the workbench.
Looks like the old florescent lights need an LED upgrade. :)
Andy, if you want to redo the isolation of the garage, than use PIR plates. Preferably on the outside if the garage.
Andy, don’t forget the led lighting in the cabinet👍👍👍
I have been looking on how to extend my Bluetooth from the solar shed to the house from some time, for exactly the same reasons ! Thanks for this video !
Andy, try a Rivnut. It is a way to have a blind nut in sheet metal.
It feels like this video should be made for "Andys Garage". 🐸
I've only been a subscriber for about 2 months, but love learning from your experiences! Keep up the great work!
There is something satisfying about watching someone struggle that makes me smile and reminds me of all those hours I have spent doing the same thing myself :).
Why not just use AC To Dc or the network gear if your not to worried about loss?
I am interested to see what you do use a 48v to 5v stepdown transformer for some devices but the rest are setup ac to dc.
Keep those videos coming and going to look at your old ev chnl.
Thanks.
Good cleaning! Now back to work! Thumbs up 👍
You owe me a T-shirt now because I was number 100 like :) It's just in time that you came up with something more interesting than all these tests. I'm doing the same for my new house in Budapest that I've been building for several years now. Looking forward to the next episode
Andy you could of used your magnets to hold it up for you, to make the holes. Extra pair of hands. I wonder what it will do to the heat in the garage, removing the insulation. Perhaps fit some solar fans to ventelate it during the day. Keep them coming.
It looks good already.....! Solid as a ROCK.....! Awesome Sir...! =)
Note that you can power POE+ routers *directly* from your 48V battery system. You just need a fuse / breaker for safety and you are done. POE+ allows operating voltages up to 58V (and can tolerate up to at least 60V), and will operate down to roughly 50V, which is a perfect match against LiFePO4. I do this for my POE+ system (security cameras, some outside lighting, and Wifi Routers).
Also note that USB-C converter cables can supply 19V and 12V and 5V for you. A USB-C PD port can produce all of those voltages and is completely short-protected. Consider using USB-C for the step-down DC conversions. You can also get POE+ -> DC splitters which provide a USB-C PD port. So lots of options for low-voltage DC appliances.
Home Assistant Bluetooth Proxy is another option.
Uhm Andy
You might want to use a mask when dealing with mouse excrement, wouldn't want you to get sick. Safety first!
Hey Andy I'll watch any video you produce it doesn't have to be solar related.
Yes PHEV...memories!😂
they were honest in the end!
Thanks Andy
Heya, so your upgrading your network connections and doing some needed isolation work that is gone be a lot of work for sure
Magnets from hard drives. Recycling, very nice.
85k ahead !
Like# 933 while on vacation!
Have an off-off grid application in the mountains of Arizona, USA. Looking at 2 - 12v x 304ah, diy, and after setup I really don't want to fuss with it forever. I'm 70 and share the cabin with 72 year old "female" cousin that loves to use tech, and loves to cook but it's all she can do to charge her phone.
Looking for BMS for the 304 or 270 ah units but no luck so far. Can you, or anyone, offer suggestions.
Love your channel, thanks.
I know I been following since the old channel
Hi Andy, there is a new smart DC/DC 12/12V 50 Amp converter from Victron coming on the market soon. It is smaller, more powerfully and more efficient than the previous 30 amp model.
Would be interesting to test, especially for the large number of boaters and campervan idols in the audience. Egenolf, Netherlands
You can try to run the 19V Device from 12V I have several that do fine that way.
just 3d print an endcap to cover the end of the rails xD
The NUC will run from 12V I think. Mine does.
At 15:00 you could just 3D print some small 20mm or whatever caps to push in to the end, make it look like an intentional decision and it will also make it look cleaner.
Of course Andy it's always possible you could do some unplugged EV videos with the Tesla
You collect all your dead hard drive magnets too? I'm not alone..
Hey Andy, wasn't that the insulation you removed from the ceiling? What will you do when summer comes back to Sunny Hot Australia?
crazy. Andy, you've been spawning channels all over the place :)
Hi @Andy - What video editing software(s) are you using. Couldn't find references on your web site.
Yeeeea andy te hecho de menos ,como vas
i need a Brush Plate too
Mask would help for the dust and also self tapping bolts for your brackets.
Yes, I had a mask on, but I now have a method where there is almost no dust falling off this cloth any more while removing. Of course, now, that I'm almost done, you find the perfect method😅
@@OffGridGarageAustralia well, next time then :-)
@@OffGridGarageAustralia Pity I cant show screen shots in CZcams
When I realised the video was about networking, I became concerned because you previously chose to splice a network cable rather than re-crimp it. Hopefully the crimper can make an appearance in an upcoming video.
If you plan to use a patch panel, you might also enjoy a "brush panel" to go with it.
Are there plans to replace the insulation?
Thought that was the plan, cut short so you can put rail caps on the ends???!?!
This is why I hate modern tech and communications!!!
Honestly, Why do you even bother with communication??? lol. I have been struggling with one inverter how do you cope with that lot?
Joking I know the Internet runs your shop. 🤣🤣🤣
In the UK that sheet metal roof would be dripping with condensation. Insulated or not. Is that not an issue for you? If not your a lucky boy!
Thanks for your advice on my car crash videos and questionable set up lol.
You're a good egg.
Panzerband für die Löcher und eine 2cm Abschlussleiste. Problem gelöst ;)
Duct tape for the holes and a 2cm finishing strip. Problem solved ;)
And why not simply using a 48V Step-down converter for your devices? so you can connect it directly to your battery.
Bombenfest!
Off topic question: I have a hybrid inverter (axpert king) and I've installed in the electrical system in my RV and IMD, because the natural and ground are bonded in the inverter the IMD alwayys trips. IMD is a regulation requirement. Any known solutions for this? also lets say I disable the bonding, when connecting to the grid for charging there will be again bonding at the supply panel
Any clues at to what to look for will be much appreciated
I hope that inside those boxes are GobelPower DIY battery KIT. I'am waiting right now almost 2 months and still my KIT has Shipped status and I really don't even know where it is right now.
Network stuff? NOW you are talking my language Andy.... other than English 😜
Is 8s 2p 0k. 100amp 3.5 volt cells. 16 cells. Seems like I should have more than. 38.5k. Running Lifpo4 light on app.
Or should I make two 8s packs.
Hi Andy, this is off topic but, I just used your settings for JBD 100Ah 48V, and then tried Overkill solar settings on thier app. Both did not work. They both seem to have limited voltage to around 28v output instead of 53+/-. Any thoughts would be great from anyone. Cheers, Brad
17:11 "There will be no heat inside, nothing."
Why would you think that? If I understand correctly, you are planning to put several DC-DC converters in there, a PoE switch, a router and a small computer. Most of the power consumed by these devices will be emitted as heat. Even if their overall power consumption would be as low as, e.g., 20 W, you will still have an equivalent of a 20 W heater running non-stop inside a small metal box with little or no ventilation. In sunny hot Australia, as you often put it.
I am unsure how hot can the inside of such a container get. But I would not call it "no heat inside, nothing".
Hey Andy, can you do me a solid favor!
Your 'Peter Inverter', i'm building a wall in my 4wd mount it and i've got the online dimensions BUT, i don't think they include the pos/neg terminals sticking out or the mounting brackets.
Could you measure yours and tell me the length including the two terminals?
Also the width between the brackets (side to side) i'd appreciate the help
Andy, can I hold that up for you?
Hi Andy. Maybe you can help me. I got 4 jbd 100A BMS and I was looking for a extension for the balancer cable and I don't know which connector this is. It's 4S so 5 Pin - it is similar to the JST PH 2.0 - so the pitch is 2mm....but the connector is some weird plug..
I can't find anything like that on Google...
Do you have an idea?
*Hello sir! In the past, I know that I watched a clip on your channel related to a BMS that required an external 3V source to activate it. Can you direct me to that clip? I can't find it anymore...*
Hope you're putting up silver foil type matter on the road. Beautiful 80 KW day today down here.😂 I would run poe to shed like mine
Yea andy l miss you ,how are you doeing
I almost think I remember that other channel.
👍👍👍
Just goto jay car and all tornincs and get an esp32 u can flash it to run as a Bluetooth proxy faster than pie native. Needs esphone happy to talk u threw it these proxies can be everywhere so every room gets Bluetooth
The bigger mistake will ne, to disassamble the roof insulation, without knowing, what this will cause. Dependent of humidity and temperature of the air and the steel-toof, you will get rains inside, of condensating water.
All your electric installations, instruments will be happy about this allways high humidity by drying up all this condensating water and iron will like to rust.
=>> " You also have the option of having the roof panels produced with anti-condensation fleece or Soundcontrol anti-drip fleece to the exact size you require."
Like Linus Tech Tips only less janky and you didnt drop everything on the floor
🤣
Sunny hot Australiaaaaa
Mouse-Grid-Garage(Loft-Version) - *Renovations In Progress*. Topic Summary:
* Cleaning out old nests
* How to leverage your Human for Waste Collection
* Food Sourcing in an Electronic Nut's Garage
* Safe Rooms
* Don't Chew the Wrong Things! Avoiding Crispy-Critter Syndrome!
* Family Planning
* Pool Access
* How to Leverage a Human's Solar Installation
Andy thanks for your videos. Also, since when are Germans occasionally funny? The Australians must be rubbing off on you. Greetings from NL.
Andy I hope you wear a dust mask because mice poop is dangerous
You should be wearing a dust mask.
🐸🐸🐸
Where is Andy 2 when you need him???
Andy, when will you put up a Bitcoin lightning address where all your "sponsors" can donate some sats for beer?
Yo
Sei froh, dass es keine Ratten sind. Sah schon sehr groß aus.
To reach 100k you need to make more interesting and informative videos. I can't belive I've just sat through watching you remove ceiling insulation and fit two brackets to a wall? Come on Andy, you're an intelligent guy so pass on some more of your knowledge. I'm looking forward to what this work will be leading to
ChatGPT
Hello Andy, I'm encountering difficulties with the Solis Hybrid RHI-5K-48ES-5G inverter. It seems to only charge the battery from the solar panels directly connected to it, despite the meter ARC10R-D16TE indicating exported power from additional panels. Despite enabling grid charging, the inverter isn't utilizing excess power from other sources. The manufacturer assured me that this model should be capable of this functionality, but I haven't been able to resolve the issue. I've provided a video link for reference: Video Link here czcams.com/video/sjtVqiOg1JE/video.htmlsi=2S6TJpbcjZMVcM3X Any assistance would be greatly appreciated.
First comment!! 😅
Don't do a Linus and drop it!
I noticed the LTT name drop but rarely watch them myself... is Linus a klutz? 😄
Good riddance! Always hated the nasty look of that chicken wire with the rotten cloth. Was too polite to say it 😁
I very seldom have any wisdom to criticise the great professor ,but when he says with out any further to do is not correct; its without further ado
Speak for yourself, not all of us identify as human....
I gave away two network cables reasonly