Remote not turning on TV - Replace IR sensor
Vložit
- čas přidán 12. 08. 2024
- TV Repair video PlayList
• Vertical lines on TV -...
1. Vertical lines on TV - Inspect & clean
• Vertical lines on TV -...
2. Vertical lines on TV - Most common causes
• Vertical lines on TV M...
3. Vertical lines on TV - Replace Main board
• Vertical lines on TV -...
4. Replace TV ribbon wiring
• Vertical lines on TV -... - Jak na to + styl
TV Repair video PlayList
czcams.com/video/-QdPg_jPkGY/video.html
1. Vertical lines on TV - Inspect & clean
czcams.com/video/5IY6TKdi4kg/video.html
2. Vertical lines on TV - Most common causes
czcams.com/video/v6SA5BQCqJQ/video.html
3. Vertical lines on TV - Replace Main board
czcams.com/video/qZYYK1xpYQ0/video.html
4. Replace TV ribbon wiring
czcams.com/video/O9GTDo2Bfg4/video.html
Great video and very clear instructions that will help anyone with this type of problem! If I was to add anything, please be extremely careful laying your tv down as to make sure there is nothing that could possibly crack the screen. I had a friend who bought a Samsung flatscreen TV about 6 years ago and he layed it down on top of a screw. He heard a crack and the brand new tv had a cracked screen from being laid down on the scew. Fortunately for him, he called Samsung customer service and they replaced the tv for free on behalf of his mistake.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
We really appreciate you sharing this as well as taking the time to add your very helpful advice. Any and all feedback and advice is greatly appreciated. That’s awesome Samsung replaced his panel for free.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem.
toolboxtoken.com
Reach out to us any time! 🧰
Thank you this is very helpful! I was able to get my tv open and find the sensor. Where can I purchase a new one?
Thx great help 😁🙏👌
Thank you.
nice video...very clear step by step instructions!
Thanks Gene, that means the world to us. We appreciate you sharing this on your Wednesday afternoon.
Our goal is to get you the info you need without wasting your valuable time. Reach out to us any time and hey if you’re into crypto trading, be an early participant in our newly launched DIY community ecosystem.
Toolboxtoken.com
We DIYers need to stick together! 🧰
Thank you for this awesome clear diy proper precautionary step by step video i will definitely be trying it this way be back to let you (diy) and yall know how it goeas asap. Thank uou so much for your cids just found and seen some very helpful!
We are happy to help, and we are looking forward to hearing back from you. 😁👍
Super helpful!!! Thank you so much!
You are very welcome, thanks for watching & sharing this.
Enjoy your upcoming weekend.
😎👍
@@DIYwithMichaelBorders Thank you Michael! Have a lovely week and weekend!
@@GeetaAryaArtStudio
You are very welcome, you as well.
😎👍
Nice tutorial thanks!
Good morning ☕️ thank you for sharing. Many more helpful videos to come. 👍🧰
Tremendous thanks man
You are welcome. 😁👍🧰
Thank u soo much
You are very welcome, so happy to help. Hope all is well. 😎
Would you know of a compatible IR sensor for my QN65Q80B Samsung TV. I can not find anything that is specific for this tv. It is only 14 months old and it is getting power as I can only use my tv through my FIRESTICK. Any suggestions would be great. I thought maybe an IR blaster but can not get to my smart hub at all
Ok ill try it
Thanks! Now I can successfully break my tv!
Thanks
Nice video
Hey Mike, thank YOU! Reach out to us any time. 😎👍
hi sir want to ask how ti know what the module ill buy that is compatible with my tv?
Hi. I appreciate the video. My IR sensor is not working.
Do you know what I can buy the IR sensor?
I went on Samsungs website and I found my tv, but I can’t find the part
Hi Michael. Thanks for the video.
I have one hisense H55NEC5205 and one Hisense H55N5705 in the same room.
Unfrotunately they both react to the same remote.
So not finding any good solution, I thought, if it might be possbile to change the IR Sensor with that one of a different model to use with a different remote.
Do you think this would work or would you have another idea?
Good morning ☕️
Before replacing IR sensor, it may be as simple as re-programming your remotes. Below is a helpful video.
czcams.com/video/h8sFEgziAu4/video.htmlsi=pKcXCv9rHBMyrpX2
👍☕️
Question: Do you have a video on how to replace a the power button and IR sensor on a Samsung that is located on the bottom center of the tv? Thanks!
@@naplesfloridainventorruiz7555
Thanks for watching. Not located in the exact center however we will share our (Fixing TV’s PlayList) below as well as additional helpful TV content.
*******
TV Repair video PlayList
czcams.com/video/-QdPg_jPkGY/video.html
1. Vertical lines on TV - Inspect & clean
czcams.com/video/5IY6TKdi4kg/video.html
2. Vertical lines on TV - Most common causes
czcams.com/video/v6SA5BQCqJQ/video.html
3. Vertical lines on TV - Replace Main board
czcams.com/video/qZYYK1xpYQ0/video.html
4. Replace TV ribbon wiring
czcams.com/video/O9GTDo2Bfg4/video.html
Using your video, I was able to take apart my TV, order the correct part off of dBay, replace the IR sensor, and put it back together. It worked!! Yahoo! I was so proud of myself. Until a day later when it quit working again. 😞 Any suggestions on what might be going on?
Try replacing the cable as well I think usually you can buy the whole IR blaster and cable together
Update?
Good job man Thanks
Good morning & thank you. So happy to help. Let us know if you have any questions, us DIYers need to stick together!!! 😎👍
Do all TV irs illuminate? I have an 08 Tru Tech CRT and don’t see it. Unless it’s super dim.
you checked with your phone? You're not supposed to see it with your eyes!
Late I know but my sensor light is red and on, my remote is working but can't turn the tv on. My Apple TV remote turns my Samsung on but that's through the hdmi. I can't adjust the volume or anything because it goes through the ir sensor. Any suggestions? Samsung chat told me to reset it but can't do that unless you have a working remote. Our nearest repair agent is over 3 hours away
@@nicolemiles4663
Thanks for watching, we appreciate you reaching out to us. We are leaning toward a faulty remote however before replacing remote all together, we recommend re-programming it.
Below is a helpful video on how to do this.
czcams.com/video/h8sFEgziAu4/video.htmlsi=HZ3sgV-x7nI6VDJ7
😎👍🧰
Saved me a new tv
Thanks for watching sharon, that’s great news and we appreciate you sharing this on your Saturday afternoon. Buying a new tv can be expensive.
Please let us know if you have any questions.
Also if you’re into crypto trading, join us at our newly launched ecosystem.
Toolboxtoken.com
We DIYers need to stick together! 🧰
Hi. My remote and TV was working fine. I did a factory reset(there was a line in the screen). Now my remote turns on the TV but will not pair. It’s not the remote tried a new one and tried switching TV on and off. Do you think this is the IR sensor. If so where do I order one to replace it. Thanks 0:01
Thanks for watching, that’s very possible. You may even consider a friendly cleaning prior to replacing any parts as well as a picture quality test. Below are a few helpful guides.
czcams.com/video/-QdPg_jPkGY/video.htmlsi=NHgt8ythQ1wkVwLJ
czcams.com/video/5IY6TKdi4kg/video.htmlsi=bJrtHSZqY8tVYqFB
👍
What is the sensor is luminating but still doesn’t turn on .. i checked my remote and it works with other tvs just not one
Good morning Priscilla, welcome to the DIY Raptor Club. Let’s get this figured out. You may need to reprogram your remote.
Below is a link to our video showing the reprogramming procedure, it’s very quick & friendly.
czcams.com/video/h8sFEgziAu4/video.html
Please keep us posted. 😎👍
Do you happen to have the replacement part number?
Thanks for watching, below are the numbers to our exact sensor.
39955A
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
amzn.to/3PBvvkx
😎👍
my led have low range i have to use remote maximum 3-4 feet range only i have replaced remote but foult is with led sensor what can i replace or repare
Thanks for watching & welcome to the DIY Raptor Club. The next part to replace is your IR sensor.
Keep us posted. 😎👍
Hey, If my TV sensor is broken can i buy something to plug in the TV that will act like a sensor ?
Thanks for watching & welcome to the DIY Raptor Club. Some TVs have internal sensors that you can activate through your settings...most modern TVs from 2015 & newer do not have this feature.
You may be able to get a very friendly priced sensor online if your tv doesn’t have that feature. 😎👍
You can download an app to your phone which does not use the sensor.
Hi sir, my LG TV is of 2011. IR receiever is damaged. Can you give me a rough estimate of its price?
Thanks for watching, IR sensors are very affordable. Should be no more than $50.00 if purchasing OEM part online.
I live in Canada Ontario where can I buy a samsung tv remote sensor please?
Thanks for watching, have you located the part number for your sensor? We can help you search for a replacement part.
Anyone have any replacement part website suggestions? The few i found had no remote sensor replacement parts.
@@h3x3n26
Thanks for watching. Do you have the exact part number of your remote sensor? We can help look up the exact replacement part for your exact TV.
@@DIYwithMichaelBorders not yet i only just heard of the issue from my buddy shortly before posting. so my initial response was to search by tv model number. if after i get to his place this weekend and i get the part number and if i still cannot locate it ill post a reply here again for possible help. Thanks for the response!
@@h3x3n26
Awesome, we are looking forward to hearing back from you. 🧰
I have un50nu6900fxza an remote turn on the TV but no chang chanel and don't volume up and down
Thanks for watching, we recommend re-programming your remote. Check out the video link below.
czcams.com/video/h8sFEgziAu4/video.html
😎👍
Can I use a vertical remote to turn on my TV if it does not come on
3:55 3:56
Thanks for watching Dorothy, have you located your power button on the tv itself?
Is your remote not working? If not, you may need to reprogram your remote. Link below shows the steps.
czcams.com/video/h8sFEgziAu4/video.html
😎👍🧰
My Ir sensor is red lit... but the control wont respond to it... the control responds to other tv... the power button is located directly behind the ir sensor.. i can manually power on but thats as far as it goes and change to source manually... but the control isnt working with this tv which is the original control for it.. Help
Thanks for watching & welcome to the DIY Raptor Club. You may need to reprogram your remote to you current tv. Below is a link to our video showing this.
czcams.com/video/h8sFEgziAu4/video.html
😎👍
The control is the older samsung control... my source button doesnt allow me to select remote setup... its the older samsung smart tv...??
@@angelangel9203
Thanks for the reply, you will need to access your menu manually by using push-buttons on tv.
At that point, once inside correct menu for remote programming, you can reprogram remote.
😎👍
Hi Michael my Tv has this problem from yesterday but sensor is still illuminating after switching off… so what might the problem??? Can you help us as we are in a new place and don’t know about the service providers here
My Tv is sharp roku tv
Thanks for watching, any update? We recommend re-programming your remote. Below is a link to a helpful video.
czcams.com/video/h8sFEgziAu4/video.htmlsi=lPNniIPJ9LuCODOg
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Hey thanks for replying but our roku Tv doesn’t switched on/ off using remote, n we don’t know the problem. As you stated in the video the ir sensor isn’t blinking on pressing buttons of remote even though it is switched on by using power button of tv
@@keerthikalyani5337
Thanks for the reply. You can try unplugging the TV and leaving unplugged for a minimum of five minutes, followed by plugging TV back in and see if that helps.
We also recommend removing the batteries from your remote for five minutes and then installing them back in and attempting to use remote to turn on TV.
My TV doesn't have that red light. It's an old visio. The volume and on/off would work than stop. Now nothing. I guess it time for layaway
A way to check if your remote is working is to aim your phone camera at the bulb on the end of the remote control and push several buttons. You'll see the light flashing on your phone screen. If it doesn't flash, your remote is not working. If it does flash and TV doesn't respond, see this video about replacing the sensor. NOTE: Your phone camera can see infrared light that your eyes cannot see.
2:46 what if your wires are ripped?
Good morning ☕️ if the wires feeding into your electrical connection point are damaged, you will want to replace wiring. In some cases, the wiring is only available when purchasing a new Main Board. Keep us posted on your progress. 🧰
Well my light is on , also bought a new remote and it's still not working, I'm back to the old 1960's way..
Thanks for watching, any update? Have you re-programmed your remote to see if that helps?
Below is a link to our video showing the re-program steps for remote.
czcams.com/video/h8sFEgziAu4/video.htmlsi=kJLoV7fTILkCsL6S
🧰
How did you help yourself my remote and new ones not working
@@EmmaculateWegesa get up turn the channel, sit down ,get up turn it on,sit down get up turn it off
I don't know how to change the sensor
How to buy this ir sensor please link me
Thanks for watching & welcome to the DIY Raptor Club. For our exact 55” Samsung tv, the sensor part # is:
39955A
Keep us posted on your project. 😎👍
need help
Thanks for watching, let us know what questions you have. 😎👍
Hi
Thanks for watching. Hi
Hi I have back off but cannot slide sensor out
Thanks for watching & welcome to the DIY Raptor Club. Any update?
Do you see a securing screw that holding sensor in place?
@@DIYwithMichaelBorders hi I have got it now .I am in Australia where would I get the part from
@@judithtringrove3933
Awesome Awesome, thanks for the update. 😎👍
@@judithtringrove3933 Well, there's your problem, you have to turn the TV upside down, or else stand on your head.
Would a laser pointer be the cause of it breaking on me?
Thanks for watching, definitely possible. We had a viewer a few years back that mentioned he thought a laser pointer caused his tv to experience sporadic behaviors.
Can you recommend a replacement IR sensor for my QN65Q80B Samsung? I can not find a single compatible sensor that will work with it. The TV still works through my Firestick but that’s it. No red light , my power button on the TV doesn’t work either. I purchased it 3/23 and no problems prior. What about a IR Blaster? I’m grasping at straws here?
@@nooch5lover
Thanks for watching, it will be best if we can get the part number located on the sensor itself. This will ensure we get you the exact compatible replacement ir sensor for your exact tv.
Looking forward to hearing back from you. 😎👍🧰
Why there is 2 sensor inside there are 2 sensor and another is light
Thanks for watching & welcome to the DIY Raptor Club. Newer TV’s may have a few additional sensors however the sensor with the light in most cases will be your IR sensor.
Keep us posted on your project.
😎👍
very helpful my LG sensor has gone bad i hope its the same as this as i will attempt this
Hey what’s up, thanks for watching. We are looking forward to hearing back from you on this project. Hopefully the new part you ordered fixes the issue.
😎👍
@@DIYwithMichaelBorders I haven't ordered yet I'm gonna take the back off the TV and establish the part no then I will get back thanks
@@sajidkhanmahmood
Great idea, that will ensure you’re purchasing the exact replacement part for your exact TV.
😎👍
@@DIYwithMichaelBorders until watching this video I was about to purchase a new TV tomorrow then I did a bit of good and doing this video. It can't at the right time
@@sajidkhanmahmood
😎👍
In my thomson 9A series Android TV inputs button automatically work without remote what is the problem
Thanks for watching, that’s usually an issue with the remote itself and buttons getting stuck or malfunctioning.
Original remote fault by water new remote working well but not pair with tv. My problem is without remote it automatically changes where is the problem occur it's in the IR sensor?
@@Cyclingfit1988
Thanks for the follow up, that’s definitely a possibility. Replacing the IR sensor may solve issue.
I want the details of how IR sensor working
@@Cyclingfit1988
Thanks for the reply, the IR sensor is what the remote communicates with to turn on tv. Most TV’s have the IR sensor as a separate part than the WiFi module…which is what the tv communicates with to connect to wifi.
If IR sensor is faulty, the remote will not be able to connect to tv.
How much are these SENSORS??
Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community.
You will find then to be very price friendly. By chance do you have the part number of your old sensor? We can help find you a replacement. Keep us posted.
Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
$15 on ebay
My Samsung UA40H5 100ARMXL
The sensor on TV lights
But when using remote I cannot make it give instructions to TV.
I have changed TV batteries. There is no issue with remote.
Is is possible that the sensor light works but sensor has gone kaput?
Please let me know what can I do?
Thanks for watching, any update? You may need to re-program your remote. Below is a helpful video link.
czcams.com/video/h8sFEgziAu4/video.html
Keep us posted and hey if you’re into crypto trading, check out our newly launched DIY ecosystem.
Toolboxtoken.com
Reach out to us any time. 🧰
The light on mine just blinks forever :(
Thanks for watching & welcome to the DIY Raptor Club. Does it still operate as designed?
It may be time to replace your sensor. Please keep us posted on your project, us DIY’ers need to stick together!
😎👍🔧🔩
@@DIYwithMichaelBorders
If the red light is broken
Is it connected to the IR sensor?
I mean if the red light is broken and the ir sensor is good
Still the remote will work with no red light?
@@user-ql5jd3vg2o
Thanks for watching & reaching out to us. If red light is burnt out & no longer illuminated when TV is off, however your remote is still able to communicate with sensor to turn TV on & off...sensor is still working fine.
😎👍