How to do a Simple Axle Swap - Dana 35 to Dana 44
Vložit
- čas přidán 10. 01. 2023
- This is a video covering how to do an axle swap on a Jeep Wrangler TJ. It is very similar for Jeep JK as well. Early in the video I stated I was going to talk briefly about the front pinion seal replacement, however, I didn't film that part.
Disclaimer: The following disclaimer applies to The BFH Garage CZcams channel (referred to as "the Channel"). By accessing or using the Channel, you acknowledge and agree to the terms and conditions of this disclaimer. If you do not agree with these terms, please refrain from accessing or viewing the Channel.
Content: The Channel provides automotive-related content, including but not limited to repair guides, maintenance tips, product reviews, and general information. The information presented on the Channel is based on the personal opinions and experiences of the Channel's creator and contributors. However, the Channel makes no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability of the information, products, or services mentioned. The content is provided for informational and entertainment purposes only and should not be considered professional advice.
Personal Responsibility: The Channel encourages responsible automotive practices. However, any actions or decisions you take based on the information provided on the Channel are solely your responsibility. The Channel cannot be held liable for any damages, injuries, or losses that may occur as a result of following or implementing any information or advice presented on the Channel. Always exercise caution, consult professionals, and adhere to safety guidelines when working on or modifying vehicles.
Third-Party Content and Links: The Channel may include links to third-party websites, products, or services. These links are provided for convenience and informational purposes only. The Channel does not endorse or have control over the content, products, or services offered by third parties. Accessing or using third-party content is at your own risk, and the Channel shall not be responsible for any damages, losses, or issues arising from such content.
Intellectual Property: All intellectual property rights, including copyrights, trademarks, and any other proprietary rights, in and to the Channel's content (including videos, images, graphics, logos, and text) are owned by or licensed to the Channel. You may not reproduce, distribute, modify, display, perform, or otherwise use any content from the Channel without obtaining prior written consent from the Channel.
Changes to the Disclaimer: The Channel reserves the right to modify, update, or change this disclaimer at any time without prior notice. It is your responsibility to review this disclaimer periodically for any changes. Your continued use of the Channel after modifications to this disclaimer will constitute your acknowledgment and acceptance of the modified terms.
Governing Law: This disclaimer shall be governed by and construed in accordance with the laws of the jurisdiction in which the Channel operates. Any disputes arising out of or in connection with this disclaimer shall be subject to the exclusive jurisdiction of the courts in that jurisdiction.
If you have any questions or concerns regarding this disclaimer, please contact us through the appropriate channels provided on the Channel.
Last updated: May 11, 2023 - Auta a dopravní prostředky
This is years of experience here. Great video. Keep them coming.
Going to save me so much time.
Great video. Thank you
So professional Mike, great work! I have to replace the control arms on my Cherokee due to wear this will help a lot!
Excellent advice and video!
Closed end of a 13mm wrench slides right over parking brake cables and disengages the fingers.
Never thought about that... I'll have to try that next time! 👍👍
Hey Mike,. Here's something for you to try for removing parking brake cables,. Find yourself a old old hold down spring from some drum brakes and clip / cut / grind the ends of it
You can thread it on the parking brake retaining clip to release the tabs from the bracket.
I have used this method for a lot of them with pretty good results.
Thank you for your videos.
Tim from Wisconsin.
Thanks for the video I am doing this in a month or so...
That flex starting at 1:34 had me rolling. 💪
I had so many problems with dana 44a in wj. I swapped in a dana 35. My dana 44a had the more expensive axle shafts. The bolt in ones for the locker.
a 13 mm box end makes quick work of those brake cables, esp a ratcheting wrench. slide over cable and with a few spins they pop out.
Awesome!
Whenever I take those phased drive shafts apart,now anyway, 😂I mark it in 2 different spots, with 2 different colors. Just in case the paint somehow gets wiped off. Awhile ago I replaced the carrier bearing on my S-10 drive shaft. I marked it,but the paint mark got scraped off when I removed the bearing. I didn't realize it until I installed the new bearing and I couldn't find the paint mark on the splined shaft. Lucky for me,It only went together 1 way. The factory made 1 of the splines extra wide. Not all of them are like that through. That would've been really bad if that drive shaft didn't have that because that truck was my only transportation at the time.
Got a 2003 Wrangler X with D30 front and D35 rear.
Hoping I can just buy a Rubicon D44 and bolt it right on the rear suspension parts.
could he put Bump Stop Pad extensions, so the bump stop hits the pad extension to bottom out before the shock bottoms out?
That's exactly what you want to do... Just not 5" worth
@@TheBFHGarage I hate it when my shock is to long
Do you not have to change the front gears to match the rear?... I've always heard if you change one, you have to change the other.
Yes absolutely!
can you use the d 44 with stock driveshaft and no sye? I have a 35 now and looking to upgrade.
More than likely you will have to get your drive shaft shortened by an inch. The D44 is one inch longer. Sometimes people don't have to, so be sure to measure.
@@TheBFHGarage ok thanks will do.
I’m building a new rear axle housing Dana 44 4.56 it’s going to be fun
Lots of fun and don't forget to check out my other videos detailing axle work!
Roger that!
does he have a SYE without adjustable control arms?
Yes. Small lift so SYE isn't truly needed but they bought it that way. If they increase lift, they will need adjustable control arms.
first!