Chrysler 300 Lightning Bolt Limp Mode FIX
Vložit
- čas přidán 11. 01. 2020
- Chrysler or Dodge Lightning Bolt ESP BAS Limp Mode FIXED. This 2005 Chrysler 300 went into Limp Mode and it was a cheap and easy fix. We ordered a new Computer from Flashmasters. Contact them of check out the link provided.
The Amazon links provided in the Description and the Comment section are Amazon Affiliate links. What does that mean? Amazon pays us a Small fee for providing a link. It cost you Nothing :-) and dont worry, we will not post a link to something that we do not use or like. Thanks for your support.
CONTACT FARM ALARM :
Email us - FarmAlarmMissouri@gmail.com
Give Flashmasters a call or check them out here ---> amzn.to/2t23v1F
BUT Be sure you order the right computer for your vehicle. We replaced this about 6 months ago. Still working great!
I replaced the throttle body and my car is still doing all these things and after I replaced the throttle body it don’t want to go past 20mlp. Do you think it would be my computer since I already replaced the throttle body?
My key broke and the car went into safe mode, 06 Chrysler 300,
M y 2006 Chrysler 300 was doing the same thing! IT went on limp mode and had no power and would stall. I ordered the same part from the link you put and just added my vin, got here in a bout a week but now it's back to running how it supposed to! Thank you so much ! And flashmasters was great with shipping, 150$ plus shipping. Would of cost me an arm an leg at the dealership. Thanks for the video!
Jonathan Picon my pedal does not work on 2011 Dodge Charger 3.6
Link don't work replaced my throttle body and still going on limp mode . Gunna try this but can't go on website
For the last few months I have been watching your channel and others trying to build up the nerves to make the decision to do this. Between you, the Hollars, Justin, Better Together, Living Traditions and others...It has really helped me to finally make my next move. I purchased a 10 acre tract in Dent County, MO. I should be heading there within the next month to start new. I Thank you so much for all your content and information you have given. So, I want to thank all of you and the community.
I feel humbled to be in such a list with the other channels you have mentioned. One of the reasons that I started on CZcams was to help others with information. I am glad that you were able to get 10 acres, you can and will do so much. Welcome to Missouri. Thanks so much for the awesome feedback. Hope to see you sharing your story... Because maybe you will encourage the next person. Good luck and be Blessed my friend.
Was the closest surprise to see the little mechanic helper, great video
I didn't even watch the video but it helped me alot. It made me realize that my farm needed and alarm.
Just received my ecm today and man this worked perfect, I’ve been struggling to get these lights off for atleast 1 year very fast shipping too would highly recommend to anyone with this problem
I'm glad that they helped you out. 👍🏼
Did the solution stick? Thx
This is awesome! Thanks for making this video. My son's Chrysler is doing all of these things exactly and he's study Automotive Technology in college and is worried he'd have to spend tons to fix it. We're going to try this out, thanks a ton again!
You're welcome. I hope it fixes it. Please let me know your results.
Did it work?
@@andrewsantana1660 yes! It worked... We replaced the computer component, had to erase codes from his car afterwards. It definitely worked though and his Chrysler is running great now.
@@souldreams333 did it stall and turn off at redlights what was the first sighns?
@@andrewsantana1660 it kept cutting off when he turned the ignition over and the battery light along with a bolt (⚡) light came on.
My car is having the same exact problems. This video was very helpful. Thank you!!
Glad to help!
Thank you sir had this problem on my 2014 Jeep Pariot ..and my husband saw your video and did the same. And it work perfectly...Thank you
Thanks for the response. Glad to help
great job and you probably save someone else tons of money too hugsssss from Ontario Canada
Thank You for your video. I look forward to your next video.
Big thanks for the info flash Masters.
2007 Chrysler 300 2.7 thanks guy. You is a big help. This is exactly what im gonna do with my car. Buy a new one just like you did and ill be back in a couple of weeks to reply to what i need and did.
Let me know how it turns out.
Did it work?
I appreciate you putting the video up thank you it helps a lot to learn about the vehicle
My car is having the same exact issues. I will be contacting Flashmasters.
Thanks for the video.
Thank you much for this video. My father-in-law and I have been dealing with this problem on my wife's 300
I sure hope it helps.
Finally found a video to help me fix the situation. Thanks 👍🏽
Thanks for watching. Hope it helps!
There is also an overlooked item that causes this type of misfire, stalling and hard starts. That is the fuel filter module. When it clogs, fuel flow is restricted and fuel pump overheats. I have an 06 SRT 300 that had that issue, I did replace both fuel filter module on passenger side and replaced fuel pump on driver side. Its working as when it was brand new. I also replaced the PCM but I did so because 02 heater relays are built into it and had failed. If you buy a cheap ebay driver side fuel pump module and it fails, pump can be replaced by itself as opposed to stock which can not be taken apart. If so, buy a genuine walbro fuel pump to replace it. Its super easy to do.
Yeah often the fuel pump is replaced, not the filter/regulator.
Do you mean the fuel strainer?
Mines been doing this and I just replaced the fuel pump crank position sensor and some other parts
I just wanna THANK YOU 4 THIS VIDEO! It Solved my problem/I just received my new ECM Yesterday & now I'm Rolling again after my Chrysler broke down 3weeks ago?/This video WORD 4 WORD is exactly what I experienced& was able to fix myself/ THANK YOU DO MUCH!(P.S I got my ECM plug&play from Flagship one)
Thanks for the feedback. I'm so glad you were able to fix your car without going to a mechanic. That's why I made the video to help people out! 👍
I just fixed my 300 by watching this video.. thank you flash masters.. also thanks a million to the gentlemen who uploaded the video..💪💪💪
Thanks for Sharing this video, I dont have this issue in my car but I want to keep my 300 for as long as possible and it might come on handy. When we hear (it might be the computer) we usually imagine spending thousands and thousands of dollars. Great video.
That’s a great fix, thanks for taking the time.
You're welcome. Thanks for watching
This video helped me out didn’t have my car for a month waiting on the part but I’m back on the road now
That's awesome. Did you get it from Flash Masters?
Thank you for the video. Been having trouble out my 06 300 touring computer. Have to keep cranking it so many times and dash board be lighting up just like yours. Be bless.
You're welcome. Glad to help. God bless
2007 Chrysler 300
I just ordered one from Flashmasters
$119.95 + free shipping!
I hope this fixes my problem. Thank you!
Did this fix your problem?
Did it work
@@alyssawilliams4954 yes ma’am
@@lifeonthemark 👍🏻 yep
what was your problem? Thanks
Thank you bro I had the same problem, I called the dealership and they told me 1,200 i went to flash masters after looking through autozone Oriellys and rock auto and couldn’t find anything. I saw this video i tried flash masters and my car is back in action the light is off and im satisfied.
That's great. Thanks for the comment 👍
Whats codes did u get
Damn !!!!! This really helped Thank You !!!!!
Love the fact you had the little man help you. Your a great Dad!
Thanks Kevin
Yeah but he should have been using a torque wrench
Great video bro 🤙🏾loved lil'man getting in there and helping ya👌🏾
Thank u so much u really helped me with my vehicle I had the same type of issues or feel I am going to and this is exactly I think my fix! THANK U SOOOO MUCH!
Cool Info. I had a throttle body code and used carb cleaner to remove the varnish. Didn't have the limp mode code. Is limp mode only 2 cylinders firing?
Great video, I had to do that to my 2006 jeep grand cherokee
Just replaced my ECU on my 2008 Caravan with a Flashmasters unit. Send them the old one back. Good Fix, along with a Throttle body clean and replacement pedal accelerator.....Minivan going again with 247K ! The stow n Go Minivan is a hard vehicle to replace as a 2nd errand car...nothing has the room, and it worth it to a point to do these fixes.....
Thanks for the video, do You have to disconnect the battery for this procedure? Thanks for the advice.
Good info. Glad I checked out your video! Good thing you had your "master mechanic" help you get everything put back together! lol
Good Morning, thank you for responding. 2008 touring 3.5v6. 145,000. I had the throttle body replaced its still doing it. I'm concerned about replacing that comment, but it is the original part
We replaced the computer, and it worked for us.
I bought a 06 Dodge Charger SRT8 that keeps stalling out. Had the gas tank replaced, the PCM and throttle body and 2 sets of plugs and coil packs and it still jumps into, I guess its limp mode. Soon as I shut it off the lightning bolt light went out and the ESP and BAS lights went off but the engine light stayed on. You think another PCM would fix that?
thank you for your video that is the problem that i was having with my 300 good video
I hope I was able to help
Great Video!Thank You
Great video ! Very good.
But I still have all the codes he is talking about an they have been popping up for almost a year now so I finally jus spent the 169 plus shipping 202 the dealer wants 1895 at the end of the day so I’ll get back to you guys on July 31 32 FARMER MAN GOD BLESS YOU FOR THIS! I appreciate you !
I had all the wiring in my car replace had that computer your talking about programmed and replace and put brand new throttle body in it. Because all light in the whole car where flashing then eventually car would not run..also replaced battery car is fixed now a year later..drove it for two days but the light stays on...not flashing..but car runs great no shaking rpms are at 500.. no sputtering muffler. I also reset it but you drive for like 5 mins light comes back on. Any suggestions?
I am going to attempt to try this myself hope it works🤞🏽
Hello I just came upon this issue with my daughters 300 hemi, does this fix correct the throttle body as some people have said they think is the problem.
Thank you so much!!! My 2005 Dodge Magnum RT is doing the exact same thing! I'm glad this video just saved me thousands!!
You didn't need to spend a dime just turn your key to the on position press the pedal five times releasing it slowly so the computer can relearn it and the lightning bolt will disappear then test drive your vehicle and it will run like new without having to spend a dime. Trust me my friends
Does this work for a dodge charger 08? 3.5 liter. Because I recently change my transmission and it seems to be like the car was in limp mode and my RPM was just revving and I couldn’t pick up speed. Or would insist that I have low transmission fluid?
Thanks man, your video helped me a lot.
You're welcome. Glad to help!
Thanks excellent info ( and the kids play)
Thanks u so much I’m wait on mine from them right now
You have no idea how much you helped me out with this
Say my car is doing this right now I just woke up no start I’ve checked it say ECM as the code so if I order this it should work right I hope
@@tonykelly2855 roll the dice my friend, I literally just went on Amazon and ordered it, just make sure it’s the right one for your car/truck then it’s gonna ask to customize so you’re going to have to put your VIN so it’s programmed to your car specifically. Wish me luck lol #letsgobyron
@@BruceWayne-ue5dj any luck?
Do you think my steering angle sensor should be replaced before I replace the computer?
Thanks for the video dude 👍🏼
You're welcome. Hope it helps
Thanks! Good to know it’s not that hard.
I have 300 limp mode issue while watching live data at the APP senor the voltage drops intermittent you think the app is bad or the ecu
Thanks for the info to where to buy a cheap PCM
Mine sounds like that the exhaust after I took it to a shop to put timing chains. The engine light blinks on and off and And now it’s having shifting problems. But I drive it 200 miles a weeks. And it goes three the gears. Just not like it usually did. And now the esp bas sensor is on and cruise control won’t work now. Do you think it could be my computer?? Thanks
I have the little lightning bolts on my dash column my friend mentioned something about a limp mode but I can’t get mine to turn over and right when it’s about to start it makes the noise you’re describing any suggestions
Thanks for sharing✊🏾💯
Replaced computer in 07 Chrysler 300 with reprogrammed one and it started just like yours shut it off and started it again to make sure it was good went inside bout 20min came back out to start and move it and it wouldn't start or crank ???
What a horrible place for any electronic module. The cowl.
Brilliant engineering!!!!
So it’s been a year since you did this video. Any problems with the Flashmaster PCM?
Great video sir
So I'm having the exact problem with my chrystler 300 no check engine lights just hose 2 lights and I replaced the brain "comp" it still doing it I also replaced the throttle body and it's still doing it any suggestions all of this installed professionally
Dude u helped me so much
Thanks so much. Glad to help
Thanks for the advice.
Thank you very much!!!!!!!!! Very good video sir!!!!
You are welcome
Thank you boss for sharing this 🎉
You're welcome. Hope it helps 😃
Question. I have a 2005 Chrysler 300. It acts like it wants to turn over but doesn’t. Is it the starter? I to the relay fuse off, did the paper clip thing to see if it would crank that way and got the same thing. I don’t know what to do…
2:10 Two thieves passed behind you 😂😂
Thank you I think it's time to change the computer as I have changed the throttle body twice, ignition coils, spark plugs, injectors 4xs, egr valve 2x
hi good video look forward to your next video.
Settin' the dealership oppressed free!
LOL
Thanks brother. I have a 07 Dodge Charger 3.5L and this has been going on for bout a year not. After a new throttle body, coils, spark plugs and damn near everything under the sun that my ODB2 scanner has said has been replaced, except the PCM. Well I sold, if not then you'll hear about a FL man who tried to drive his car into a tree, lol JK. Still it's been a long frustrating battle with this issue. So thanks for the advice.
Can this also be a problem due to a bad fuel pump. Because my fuel pump stopped working a mechanic made it work for a day next it the light came on. If I do replace the fuel pump will it solve the problem?. Thanks
THANK YOU!!!!
Exact problem im having and my stereo goes in and out i was wondering if that has anything to do with computer issue??
Got a 3.5 and was having surge issues and limp mode I changed the cam position sensors and spark plugs thing came back to life , the computer was faulting the o2 sensors, but my CEL is still on
I’m having the same problem but my 2008 Chrysler 300 touring go into limp mode once I drive it after a while and come to a complete stop and some times it even turns off if I’m in drive still I’m not sure if I need to change that part or the throttle body what’s some signs that’s it’s the throttle body if you have any
Brother I am using Chrysler 300 year 2007 my car has problem like you show video but I bought new engine’s brain and replaced new but it doesn’t work . I need to set computer or not . I hope you can answer my question thanks a lot
I have a 2012 dodge charger rt and I've replaced the fuel pump system and all 4 o2 sensors and when I crank it up it hesitates and then fire up do I need a throttle body or one of those computers from Flashmasters
Great Vidoe, the issue happen after I went to fuel up at a gas station and the " Lightning Bolt Limp " kicked in.
Thank you!! now I have to try to do this myself......
You can do it!
So my 2006 Chrysler 300 3.5L keep dying on me ( with a new battery) and goes in limo mode idk if it is an electrical issue , computer, or engine problem. I’m stuck.
So my car was running fine and just shut off while driving. Tried starting it and it's like if the key gets stuck and just putters. Any info would be really appreciated
Damm my guy you just saved m3 1400 bucks , yur a legend 👏 thank you for the video , i bought the throttle body amd still appeared, just ordered it, hopefully thats it, but dope video my guy 🎉🎉
One thing I'd try before replacing is unplug the unit, spray plugs with contact cleaner - maybe WD40 and plug them back in. Dampness could cause corrosion and poor connection through the plugs.
McCart wasn't in mode but was not shaking only at certain like 15 minutes after driving it so I bought the part you did put it in my car started shaking really bad and turned off
I’m having this same issue with an 06 Magnum. I’ve replaced everything in line from the throttle body to the pedal, everything but the PCM with no luck. I’ll be checking out flash masters.
Let me know how it turns out!
What codes did u have pop up anddid this fix it
Yoooo thank you!
Wow thank God I found you, cause I need 2!!!😵You have saved my wallet some good money.
My 06 charger srt8 is purging like yours and it shows no engine code and it stalls everytime in reverse. Could this be the problem? If this helps, it’s a built engine with a cam, tune, etc….
Hello I’m having same issue too on my 05 300 Hemi 5.7 the vehicle stalled out and cuts off while idling the lightning light came on then off engine light stayed on and after checking the code it showing u0100 which is pcm ecm issue.. will this solve it
Mechanic said it was my pcm so we bought a plug and play and put that on and still having those same problems. So it could be my throttle body??
I bought one that wasn't already programmed. How can I get one Programm??? THANKYOU!!!
So mine will lose pressure if ac is turned on and does the lights u showed. Would or could that still be the issue?
So will flashmasters help my 2012 charger rt from hesitating when I crank it up
Damn😲! That's a lot of money you saved there. Moreover, you had a ton of fun doing it by yourself with the help of your little one (at 2:47) 😄.
Thanks brothers I have the light on. Where should I buy that computer?
I was stuck an hour from home in tractor supply driveway and couldn’t figure out what to do watches this and now I’m good to go home thanks man video was very helpful
I hope it helps!
Just turn your key to the on position don't start the vehicle and press the pedal five times really slow so the computer can relearn it and then test drive your vehicle and it will run like new without having to spend a dime, trust me my friends it works
Ty for this video
Thank you fr 💯
Same year and type car. Identical issue . Thanks for video
Did it help?
@@andrewsantana1660 it did but had to send first computer back was not programmed right. Second on worked good
@@manuellamas4747 did is stall and turm off at red lights?
@@andrewsantana1660 at times but mostly ran really bad