Mercedes Sprinter Injector Removal
Vložit
- čas přidán 20. 07. 2018
- How to remove an Injector from A Mercedes Sprinter 313 2013.
I hope you find this video helpfull.
Please Subscribe and click on the bell for futher updates as to what the Test results where for the Injector.
Helpful and constructive comments welcome.
God Bless - Auta a dopravní prostředky
Can we have more?
Simple to follow.
Clear and concise.
No need trawling through waffling.
Straight in there.
Thank you great feed back I will try my best thank you
mate this is awesome great video and really well explained, getting those return leak off connectors released is what I was stuck on. Life Saver
Were you able to purchase a return line connector for the diesel 3.0
That was great, very clear and thorough. Well done.
Thank you David I appreciate your feed back. God Bless
great job. no chitty chatting just clear consise demo
Thank you
That's the best video, no messing round. Thanks
Thank you Its great to have feed back and know that I have helped in some way
Did you know that its not necessary to wait until its all carbonized and stuck? 20 euro for bolts and seals. Do it every 2 years as routine maintenance. Avoid the problems and the terrible cleaning. 30 to 40 minutes is all it takes. Without the carbon build-up its super easy. No special pullers or magic needed.
Hi Fuffoon. This is great advice
Mine has the early stages of Black Death 2014 313, leaking around 3rd injector back from front grille, I will find out if seized this weekend ? Could well be as prob got hot and deposits etc?
What’s the torque setting for the bolts to hold the injectors ?
I shudder when I see shifters used on anything. Especially on critical engine parts.
Otherwise nice work, got the job done.
What's a shifter? Adjustable wrench?
Thank you As for the shifters it's all I had on hand so
And using it backwards,,,
@@SeeBird686 It has a switch for direction and a gauge for
To good to be true. In my carer had only couple of them going out that easily. CDI always is pain in the ear.
Yes. My Return line clamp for the injector broke. Can you help me where I can find one. 3.0 V 6. diesel
Very nice video 🌹🌹🌹🌹
Thanks from me too. Got a have a look ate injector #1...
Hopefully I'll find another video with suggestions on hot to clean them.
I here new injectors on the sprinter needs to be coded with the ECU.😨😱
No, I don't think so. I replaced all 4 injectors on a 2012 Mercedes sprinter 313cdi and runs perfectly fine
Thanks , a lot
Thank you Have you watched part 2 and 3 yet?
Very helpful, but that looks like a T-50. I'm assuming it's just a typo when it says T-15.
Great video but it's never that easy to pull an injector out!
This is Very true my second 9ne was a little harder i actually did it in the Merctruck car park.
I have the video if interested let me know and I will post it.
Thank you good video what a ba£&&@ they were to remove on my sprinter seized
Thank you for your feed back and yes they were a pain but I enjoyed every minute. I have a few videos coming shortly I hope you will watch them and enjoy them too. God Bless Joshua
Tried re-coding the injectors on a Mercedes Sprinter 2010 plate and the snap-on diagnostic tool was unable to do it is there a special piece of kit you need to code the injectors on this van as i have done other cars and vans with no problems at all
Hi Zool Can I ask which Snap ON tool you are using?
@@AlphaCodecouk last years other then that i cant tell you more rite now in afraid
Hi, I replaced the common rail in my 2014 Sprinter. I bled the system etc the van just won't start. It's been sat now for the best part of a year. Any ideas?
Have you tried a rag with fuel on it?
@@AlphaCodecouk can you explain please?
Hi' I have just had an engine fitted on my 313 sprinter. Mechanic has fitted new delphi injectors but wont start. Delphi say injectors have been scarred and are now knackered (won't replace them) have you or your followers experienced this , what could be the cause and do you know of a solution
Hi Ciaran Sorry for the late reply
No I cannot say I have. When you New Injectors can you elaborate?
One question when installing the injectors, did the injector valve hit you?
No I was lucky Thank you
Does the injector have a oring on it?
It has a copper washer on the needle end
Would this kinda be the same on a vito?
Yes it should be basically the same
Are 2013 sprinters fwd?
Hi No All Sprinters are rear wheel drive
Use the correct size wrench
Hi Tim Not sure what you are saying please elaborate
All the important stuff is behind the hands so nothing can be seen!
Sorry If you tell me what you wanted to see I could maybe reproduce a video for you
Havasını nasıl alıyorsun
Hava no problem.
If you need direction to take off the air intake, do not attempt this job. Do not use an adjustable wrench on any machine. what does god have to do with it?
please talk in the video i dont want to read subtitles
Hi Gabak I will try in my future videos
Why don t write in theme what injector Bosch, Denso, Delphi? Model Sprinter 906
Denso
Yeah, the injectors are not coming at that easy.... Using slide hammer and and have gotten 2 of the 4 out.
This is unusual but Tru using automatic gearbox oil pour some down the spouts and leave for a day and come back to it.
Please remember this is only a no liability recommendation.
It should not do any harm autogearbox oil is a great penetrative oil
Let me know how you get on
Didn't worked. It was losing compression so it's full or carbon and sticky black goo
Hi Clean it up and put the injector back in
u r avin a laugh mate. now is 2020 and my sprinter outside is 2006. none of the injectors want out. one injector clamp bolt snapped 15 thread turns down. Your trucks clearly newer.
Hi James Sorry to hear that I have heard horror stories about injectors not coming out. All I can say is get stuck in and if you want send me pictures and I will see if I can help
God Bless
Joshua
Hydraulic is the solutionand can buy service from ebay where someone comes with machine. £100 or so pounds and they pull them out.
@@jamesbarratt593 I have not seen these send me a link
You are a perfect pig when using that type of tool to remove the diesel lene
Hi Ale You have to remember not everyone is Pro like you. We lessor mortals have to make do with what we have and I think we do a very good job of it too. Thank you for your feed back and I hope you enjoyed the video please feel free to watch the others and I look forward to your comments. Joshua
fake
Play louder this junk music you become as Genius.