The tutorial could be a bit better with more describing what you are doing with what exact screw and what is the end result with that bracket, etc.. However if you spend some time and pay attention you can figure it out based on this video so it is somewhat helpful and thank you for it because it helped me a lot.
If you guys are having problems getting your bed to adhere properly...I found that my print bed under the belt was cupped. No amount of leveling is going to fix that. After you bed is fully heated (10Min) take a ruler where the print head hits the bed and see if it is perfect level all the way across.
Please contact our official service email，remember to attach your printer model、complete orderscreenshot、purchase link 、printer product SN and the issue relevant video or picture . Official service email：cs@creality.com
@@crealityafter-sale5706 Ticket 71829 They are trying to send me a loop flat belt. Do you have any idea what that is? How will that fix a warped heated plate?
If you have any questions about the engineer's answer, you can explain your problem to the engineer again, I believe they will help you solve the problem well. thanks.
can you do a video on how to fix the filament runout sensor on my brand new unit that wont work. it triggers right when the print starts as if the filament isnt in it. 2 out of 4 of the machines have this issue
Hi,We are sorry for the trouble our printers have caused you. Regarding your problem, please contact our after-sales service staff who will be able to help you better.（Official service email：cs@creality.com）
I've had this machine for a year now and I haven't been able to print a single piece yet. This week I took the machine apart and found many problems. Everything is installed at an angle and many aluminum profiles are bent. I'm not happy with the machine, but I'll make it better.
Hi, regarding your question, please contact our official after-sales service and they will help you solve your problem as soon as possible. (Official service email: cs@creality.com)
I have one to there are better youtube videos that talk about the alignment tool that comes with the CR-30. I been able to run 2 prints off but no more then that Cura software is pretty bad idealab software is a improvement but it replicates your model depending on how many you want along with the slicer time. I find you have to get to the point where the alignment tool cannot go under the extruder head. The other you need a wood clamp when alignment of the printer to hold the nasal down even after you run auto home.
Spent more than 3 days trying to level the bed but prints wont stick, watched every available videos and tried them one by one and still no luck, i do have 6 other printers and familiar with 3d printing, Do not buy this printer if you have no experience at all in 3D printing, the only way i could get a print if i lower the nuzzle very close to the bed, in this video it shows paper is easily moves under the nuzzle, there is no way your print will stick with that setting. check the Facebook group and you will see everyone is complaining or have different issues.
I had the same problem as well. Another CZcams video suggested running a glue stick over the belt (where the prints will be going), after this I finally got successful prints. Creality really needs to improve the belt and this leveling process.
the worst printer creality has made to date!!!!!!!!!!! bed completely warped and impossible to level, will be reviewing this on my channel for sure, would avoid this printer you have been warned
Leveling the bed is just a pain.....this tutorial is not helpful...... there is a mistake direct at the beginning of the video.....the optical switch is for the y-axis.......for a distributor or manufacturer of this machine this fact should be just a shame
Hello, we're very sorry that this video did not help you solve your problem, please contact our official customer service（Official service email：cs@creality.com), there will be professional engineers to help you solve the problem. Thank you for your support!
This thing is a waste of money. Same problem. Can’t level it. The instructions are horrible. Like I can’t even enjoy a 1000$ product. Such a shame. DO NOT BUY THIS!
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
Thank you! your tutorial has helped me fix my printer and make it work after many fails.
Adjust the position of the X-axis limit switch - how? So the nozzle layed on the belt? Or is there some specific distance?
The tutorial could be a bit better with more describing what you are doing with what exact screw and what is the end result with that bracket, etc.. However if you spend some time and pay attention you can figure it out based on this video so it is somewhat helpful and thank you for it because it helped me a lot.
If you guys are having problems getting your bed to adhere properly...I found that my print bed under the belt was cupped. No amount of leveling is going to fix that. After you bed is fully heated (10Min) take a ruler where the print head hits the bed and see if it is perfect level all the way across.
Please contact our official service email，remember to attach your printer model、complete orderscreenshot、purchase link 、printer product SN and the issue relevant video or picture .
Official service email：cs@creality.com
@@crealityafter-sale5706 Ticket 71829 They are trying to send me a loop flat belt. Do you have any idea what that is? How will that fix a warped heated plate?
If you have any questions about the engineer's answer, you can explain your problem to the engineer again, I believe they will help you solve the problem well. thanks.
Love this machine but need multicolor new one
can you do a video on how to fix the filament runout sensor on my brand new unit that wont work. it triggers right when the print starts as if the filament isnt in it. 2 out of 4 of the machines have this issue
Hi,We are sorry for the trouble our printers have caused you. Regarding your problem, please contact our after-sales service staff who will be able to help you better.（Official service email：cs@creality.com）
I've had this machine for a year now and I haven't been able to print a single piece yet. This week I took the machine apart and found many problems. Everything is installed at an angle and many aluminum profiles are bent. I'm not happy with the machine, but I'll make it better.
Do you have some more instructions? I've been struggling with this thing for a few weeks now
Hi, regarding your question, please contact our official after-sales service and they will help you solve your problem as soon as possible. (Official service email: cs@creality.com)
I have one to there are better youtube videos that talk about the alignment tool that comes with the CR-30. I been able to run 2 prints off but no more then that Cura software is pretty bad idealab software is a improvement but it replicates your model depending on how many you want along with the slicer time. I find you have to get to the point where the alignment tool cannot go under the extruder head. The other you need a wood clamp when alignment of the printer to hold the nasal down even after you run auto home.
Spent more than 3 days trying to level the bed but prints wont stick, watched every available videos and tried them one by one and still no luck, i do have 6 other printers and familiar with 3d printing, Do not buy this printer if you have no experience at all in 3D printing, the only way i could get a print if i lower the nuzzle very close to the bed, in this video it shows paper is easily moves under the nuzzle, there is no way your print will stick with that setting. check the Facebook group and you will see everyone is complaining or have different issues.
Please contact our customer servicer，they will help you，email address: cs@creality.com
I had the same problem as well. Another CZcams video suggested running a glue stick over the belt (where the prints will be going), after this I finally got successful prints. Creality really needs to improve the belt and this leveling process.
Starting to guve up every print is failing as soon as it starts
the worst printer creality has made to date!!!!!!!!!!! bed completely warped and impossible to level, will be reviewing this on my channel for sure, would avoid this printer you have been warned
Nossa!!! Vou falar ou impressora dificil para realizar a configuração inicial!!!! Alguém conseguiu fazer isso dar certinho!?!?
I did some good things with mine. Getting a model correct Im the slicer is very important.
You are awesome!
Leveling the bed is just a pain.....this tutorial is not helpful......
there is a mistake direct at the beginning of the video.....the optical switch is for the y-axis.......for a distributor or manufacturer of this machine this fact should be just a shame
Very bad tutorial, I already try for hours to level it. I will return that printer and wait for better generations which are easier to level.
Hello, we're very sorry that this video did not help you solve your problem, please contact our official customer service（Official service email：cs@creality.com), there will be professional engineers to help you solve the problem. Thank you for your support!
@@crealityafter-sale5706 Sorry, I already sent it back, because I cant level it with your video.
This thing is a waste of money. Same problem. Can’t level it. The instructions are horrible. Like I can’t even enjoy a 1000$ product. Such a shame. DO NOT BUY THIS!
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
Not very helpful