$699 IDEX 3D Printer - Weedo X40 In Depth Review
Vložit
- čas přidán 22. 05. 2024
- The Weedo X40 is jam packed with features and capabilities and is only $699 USD. Is this too good to be true? #3dprinter #weedox40 #3dprinting
► SPONSOR ◀︎
A huge thank you to Weedo for providing a Weedo X40 for me to review!
📦 PRODUCTS IN THIS VIDEO 📦
• Weedo X40 3D Printer (Paid Amazon Link): geni.us/SRBRvqB
• Carborundum Printer Bed: geni.us/0f85aT
👍 SUPPORT THE 3D PRINTING ZONE 👍
You can supports us by joining the Channel Membership: / the3dprinti. .
or on Patreon: / the3dprinting. .
🎬 CHECK OUT THESE VIDEOS! 🎬
• 13 Things I Wish I Knew Before 3D Printing: • Revised: 3D Printing -...
• 3D Printed Bulletproof Stormtrooper: • 3D Printed Wearable St...
• 2 Tricks for Getting the Perfect First Layer: • 2 Tricks For Getting t...
• 7 Must-have Accessories for 3D Printing: • 7 Must-Have Accessorie...
📲 MORE 3D PRINTING GOODNESS 📲
Visit our website at www.the3dprintingzone.com
🕶 SOCIAL MEDIA 🕶
Facebook: / the3dprintin. .
Instagram: / the3dprinti. .
TikTok: / the3dprinting. .
📚 TWO FREE AUDIOBOOKS! 📚
To get two free audiobooks from Audible, just follow this link: goo.gl/QGFC4Q - Věda a technologie
UPDATE: You can now use iOS and your Apple ID (or Facebook) with PoloPrint Pro. That still doesn’t fit everyone’s situation but works for a lot more people.
I have this printer, and this printer isn't for beginners. The app isn't necessary to use this printer, I didn't even know where was an app. You can disable the power-on re-home in the settings menu by turning off POST. To get it to work with octoprint on the Raspberry Pi, you need to update CH430 driver on the pi with the patched CH430 driver by juliagoda on github. The heads smacking together is a bug in the old CURA engine that powers their WiiBuilder slicer. Use a new version of CURA.
Great review 👏👌👍
You have to forward the port to access the Wi-Fi from other locations other than the home network it took me a while but I finally got it working
Thank you for the detailed review. The printer has a lot going for it. However the colliding print heads and no obvious belt adjustment is a red flag for me. The deal breaker though would be not being able to connect and control the printer using octoprint. Cheers 👍😎🇦🇺
Belts have limited adjustment. Holes are slotted for the y stepper motor. Pulleys are slotted on the X axis. Adjustment is not much and slots may need to be opened up a little. I have done this on my X axis, and I slackened my Y a little as it was too tight.
Did making these adjustments show a noticeable difference with your prints? Would it fix the layer shift if that was an issue you were having?
@@lukaslaing7973 I wasn't getting layer shifts. Belts were just slightly too loose. The adjustment is only a few millimeters. Are you getting later shifts in X or Y?
@@alanjones3514 unfortunately I'm not getting anything. Right out of the box the machine doesn't calibrate. The z axis will either climb to the top and keep pushing up and shaking until I get a homing failed error, or it will go down until the bed sensor lights up , then it will just push the nozzle into the bed and keep trying to go down again until it gets an error.
Hilarious choices and options, name too xD
I saw on just flag channel I think it was it was there's AG code default setting you need to change so it doesn't auto bed level every time or was it Aurora I don't remember anyway
Ok' I got as question for you : This seems to be your latest video and I want you to see my request ; I'm already using Cinema 4D for my projects I want to know if can still use it to feed my future 3D printer?
If not what I I'll have to do to make it compatible? And which printer can be the best for my type of work?
The work flow is:
modelling program outputs model in stl or obj format
slicer program reads stl or obj and outputs gcode file
printer reads gcode.
Look at what your export options are for cinema 4d and see if stl or obj are there (obj is almost certainly there).
Then download a slicer program and try ingesting one of your transformed models.
If the slicer program can handle it and give you a reasonable looking preview, you are good to go.
what slicing software did you use? I cant seem to find the x40 on either of cura's or wiibuilder's printer lists
I used Cura. I find that adding a custom printer with the right sizes usually gets me off to a great start and then I can tweak from there. I suspect there are profiles out there for this but I didn't spend much time looking.
@@The3DPrintingZone thank you, I guess will tinker with cura for a bit.
@@jcerown127 the new version of cura has an x40 profile now.
How do you rank your IDEX printers?
The current firmware does allow you to turn off the turn on POST check its under settings about 2 pages in
sorry turn off POST check
Good to know! I’ll definitely have a look.
one person in out X40 Community group is also working on a port of the latest marlin version to this printer, once this is done all problems, especially regarding the colliding heads should be gone. :) How ever there is also work going on, to have a guide on how to replace the board of that printer while keeping the display etc.
Thanks. Do you have any updated thoughts on this printer?
Hey Bill, not really. I haven't bothered spending much more time on it since I was pulled in other directions and it hasn't shown a lot of promise.
I hope someone will make a comparison to IDEX Tenlog and Sovol.
Great videos. Sub’d.
I really don't know what people expects with power failure recovery + carborundum bed
A glass bed is not possible. Testing the sensor with the metal plate supplied max gap for sensing is about 3.6mm in air. The Creality bed is 4mm and cannot detect the steel plate. The proximity sensor is not adjustable.
Glass bed is possbile with a change to a $10 capacitve sensor.
Review the Creality HALOT ONE
Did you manage to resolve the layer issues seen on the helmet?
Not yet, no. But that’s largely because I haven’t had the time to. I’ll play with settings, belt tension and speeds to see what I can do.
@@The3DPrintingZone Better late than never, when I assembled mine
the z tower was a way out of square to the base. I pushed it into the corner
and never touched it again. Someday I might waste some time correcting it
but all the extrusions will have to be checked for square. Probably will give it away . Not a big fan of IDEX any more. I have several two into one hot ends that really deliver. 2 cents worth
(7:51) How do you figure there are more apple iOS than android devices?
Serious question.
I checked. Every placed I checked indicated a greater share of iOS than Android in the U.S. That's not the case worldwide but it is for America. gs.statcounter.com/os-market-share/mobile/united-states-of-america
@@joshuacahill2139 @Joshua Cahill Sure did. I bet that's from the release of the iPhone 12, since a new iPhone comes out each year in September/October.
Can you mirror polish the steel plate?
If you mean the helmet (PLA), yes, you can. If you do a search for mirror finish 3D Prints there are some great tutorials out there on the topic, but I haven’t done it myself.
@@The3DPrintingZone no... instead of going to glass, can you just coat or polish the metal plate? Or does it literally need to be a glass plate?
I'm new to this but I want a good printer that i can make machine parts on. I want make a working plastic engine. I like the glass plate idea but as you said, it needs the metal plate to calibrate the printer. Thanks
@@redfishbluefish965 Ah, I see what you mean. I'm just not sure on that. I think with some effort you could remove the bed sticker and polish the steel, most likely, but I certainly haven't tried.
@@The3DPrintingZone thanks. I just watched the other vid on the prisa i3 MK3S+ and you also said you had good improvements on the creality so im gonna consider those instead...thanks for making these vids!
Double z axis help with stiffness, not with bed leveling. Unless the bed in a single z axis setup is so soft that it noticeably deflects when printing heavier objects.
Octoprint can be used, check, x40-community.org/index.php/11-tuning/22-workaround-and-tipps-for-weedo-x40-printer , to resolve a driver issue.
The first 28 seconds gives me the impression this is a rap song.
Give it another six months and I think we will see a clear winner in the battle of the IDEX, I don't the X40 will take this prize!
Which one then
@@nf794 Another 4 months to go yet, I expect more IDEX models to be released in this time
@@AndrewAHayes six months passed, so which one?
Well? We're waiting...
@@SilynJaguar The steam seemed to have dropped out of the hobbyist IDEX battle I was sure there would be a definative machine by now (shows what I know) I guess getting an industrial machine is the real answer for a "Working" IDEX
Making users sing up for a tracking app is a deal breaker for myself and others. Too bad, but it looks like the machine still has too many flaws to be considered. Seems like a Beta unit; another company using customers as Beta testers? Still looking for a IDEX...
Have you found a descent IDEX printer?
Connection to social media for the App to work, kills it for me :-(
The only reason I can see for using a microSD card (instead of a full size SD card) is because it might make the control board a few cents cheaper, at the expense of making your use of it more cumbersome. If a company is cheaping out to that extent, I won't be buying their product because they are probably cheaping out in other less apparent ways as well.
The use of MicroSD over SD is actually pretty standard on most 3D Printers, even many of the nicer ones, but I agree. I would much rather have a full size SD. 3D Printers obviously don't need to fit in anyone's pocket so why make us fumble with tiny little cards and adapters?
It is probably because a full size sd would make the pcb bigger (and more expensive). Also, microsds are becoming the standard in all devices, and are being sold more often. There are also micro sd to full size sd adapters that you can buy. Full size sd on the printer would be nicer than having to deal with small, fragile memory flakes, though.
Obviously the printer and the APP has no relation to the social networking IDs, especially considering the fact APP works in local WiFi network only, it's not Cloud-based integration between your phone and the printer. The only reason they need your social networking ID -- to collect your information and trade it to 3rd parties or DarkNet. We had the same issues with the chinese camera-scope that connects to your phone via WiFi and needs your social networking IDs as well. They said in the manual "because the integration is done via our Cloud". In reality the integration was the same as in your case -- local WiFi only. The FB account details were sold to 3rd party company without any permissions from our side.
Too bad it doesn't do a purge tower instead of purging over the print itself.
get a $6 micro SD card extension cable
Yeah, that's a worthwhile purchase for this machine - just a shame that you would need to. This is the only printer I have that has this issue.
I actually bought the X40V2 a year ago as my first printer.
It was a used salvage freight unit that seemed as if someone had did quite a bit of printing on as it had 1000 hours on it and tons of files .
I believe the guy i got it from probally adjusted everything and did a really bad job of it , everything was either extremally loose or tight there was no in-between.
it took some trial and error but i had it printing ok within the first several hours .
I've printed tons of prints most pretty flawlessly including lattice benchys up to 290mm tall duel 100mm calibration cubes tons of flexi dragons snakes and such without rafts or brims .
it now has well over 3000 hours , ive replaced the tubes with capacorn tubes and went to solid bed mounts I have also surfaced the magnetic sheet .
i only tried to get the wifi to work once but failed this very well could be my fault .
i had considered buying a new one as they are about 600.00 now , but im trying to get away from bed slingers .
all in all its been more than worth the 200.00 I paid for it it would have been worth the 699.00 as well as it has worked .
Oh on your helmet unless you were using a .6 nozzle .3 is way to high on the layers I find 0.15 - 0.2 to be a pretty good height .
one other thing ive noticed is its pretty sensitive to temperatures such as running a bit to low temp will greatly increase layer lines .
Thanks for the video I really enjoyed watching it .
whats up with 3D printer manufacturers making SD card slots too wide, so the fucking card falls inside the printer ffs... my Bigtreetech Biqu B1 has this problem too... fucking annoying shit
Agreed! That's a major oversight by the manufacturers.
Company provides ZERO support. In face book groups many people are unhappy with it. I would not recommend
having to link to social media just to access the printer is a deal breaker. No octo-print is a deal breaker. Plus, the name is too goofy; what were they thinking? This isn't even core xy. A true loser.
Facebook & WeChat required is a nogo for me.
I see absolutely no reason why unless they need to spy for marketing.
Looks like they just released an iOS version that can use Apple ID instead of Facebook. That still won’t make everyone happy but a step in the right direction.
Thanks for telling me about Facebook, not the printer for me.
You may have already seen this but if you're using iOS you can just use your Apple ID. If you're on Android, that's no help, unfortunately.
$699 doesn't look like such a good deal
Who cares what it does. It could be the best printer in the known universe and I still would never give this company any money.
Why not?
No Apple support, not for me !!
I just found out today that they now have an iOS version. I tried it and it worked great and you can use your Apple ID to sign in.
Nope, dont need this piece of crap.