Dual 1219 1229 Turntable Rubber Sleeve Ring Replacement for Tonearm Height
Vložit
- čas přidán 10. 07. 2024
- 0:00 Intro
0:55 Flipping turntable over
2:47 Removing old ring
6:48 Cleaning with alcohol
7:57 Showing new ring
8:25 Greasing surface and ring
9:28 Installing new ring
11:08 Oil
11:32 Cleaning up with dry Q-Tip
12:37 Flipping turntable back over
14:03 Testing lever
My first time replacing one of these.
For Dual 1219, 1229, and 1249 Turntables
with "single" or "multi" mode lever
for tonearm height adjustment
(vertical tracking angle)
It is very important to replace this rubber ring / sleeve / washer as the old ones are usually brittle like the one I removed here.
The rubber ring holds and squeezes two ball bearings that press into an indent on the metal rod that adjusts the tone arm height via a lever ("Single" or "Multi") at the base of the tonearm.
Don't use the lever unless you know the turntable
has had the rubber retaining washer / sleeve / ring
replaced.
Whatever you do, don't ever force the lever if you feel any significant resistance
because there is an important plastic part of the tonearm
called a "deering ring" that is under constant spring pressure
and can easily be broken if you try to force the lever.
If the dearing ring breaks,
plastic pieces of the broken part
can get caught up in the tonearm mechanism
and render your turntable unusable.
Replacement rings / sleeves / washers are available on ebay and other stores.
I bought a clear ring from one vendor and a black rubber ring (like the original) from another but I decided to use the clear one for now.
The clear ring is slicker feeling while the black one feels more like regular rubber.
After reading another post on vinylengine.com, It looks like I probably should have completely removed the two ball bearings and cleaned them.
Please check vinylengine.com for expert guidance.
www.vinylengine.com/turntable...
www.vinylengine.com/turntable...
audiokarma.org/forums/index.p...
repair, fix, washer,
Nobody rightfully showed up close the lever to raise and lower the tone arm and I truly wanted to see it for myself. Thank you much for this demo.
Bravo! The smooth jazz was a nice bonus.
Thank you!
Thank You your vid helped me fix my 1229. Bill
Now let’s see the Dearing fix. I have one to send ya that needs it.
Hi. Did you change this tonearm head, or this already came with the turntable? I'm just asking because I have a 1229 with a broken tonearm head. Yours looks different. It's silver with 8 circles holes. Very helpful video btw. Many thanks.
This is the original headshell. This turntable is a later version of the 1229 called the 1229Q. The original 1229 headshell has sort of a grid pattern on the top whereas the 1229Q has the circles.
RE: the clear ring vs. the black ring: the black ring may be Neoprene, the clear ring may be urethane. Urethane lasts a few years and then rots just like the old black rubber one you removed. Neoprene would be the best material for the purpose: it does not rot but only eventually hardens somewhat over many years.
Thanks for the info. You might be right. The clear one (from eBay) said it was made of "inert rubber with high UV, temperature and abrasion resistance" It feels like silicone which (I think) should be ok.
А пружинку снять религия не позволяет?
Некоторые из вымерших религий включают; Ведизм, религия ольмеков, тенгризм, ашуризм, манихейство, митраизм, минойская религия, атенизм, ханаанская религия, финское язычество.