Razor MX650 “E&C Ultimate” Kit 2.1 / FULL TearDown / Install / B4 & After Rev Up / Quick Show & Rip
Vložit
- čas přidán 25. 06. 2022
- Here’s the Tear down of the Stock Razor MX650. FULL Step X Step Install of the Electro & Company Ultimate Razor Kit 2.1
Links Below.
Shopping At Electro & Company?
Use Code “KruseN5” At Checkout For A Discount!
Shout Out To:
Sur Ronster:
/ surronster
for the Inspiration behind the project.
The Links:
Razor MX650:
Razor Dirt Rocket Electric Motocross Off-Road Bike - SX350, SX500, MX350, MX650 Models www.amazon.com/dp/B000FK7C60/...
What’s going in the bike………..
Electro & Co. Ultimate 5000w Razor Kit 2.1:
www.electroandcompany.com/pro...
Eon Lithium 48v 20ah Battery(in this video):
www.electroandcompany.com/pro...
Waiting on the
Eon Lithium 72v 24ah Battery:
www.electroandcompany.com/pro...
E&C Hydraulic Disc Brake Kit:
www.electroandcompany.com/pro...
Next I’ll be OverVolting the Razor Dirt Quad from 24v to 36v.
#Power #Install #KruseNStuff - Zábava
I love that you show every single step, very helpful 👏 thanks 😊
Appreciate it💯🍻
INSANE build brother love these ele and co builds, this video will probably be the one that makes me pull the trigger on the kit and bike looks like a blast! super informative and easy to follow good work man!
Thanks BRO. These kits are The Real Deal man. I’m in LOVE.💯Bout to throw the same kit on my sons RSF650. That’s how much we love it. I suggest grabbing the hydraulic disc brakes & get one of the bigger batteries if you can. At least the 24ah. You can tune it higher. Let me know if you have ?s. Got ya man.💯🍻
That look's soooooo clean nice rip Brother 👊💥👍💯✌
APPRECIATE IT MAN💯🍻
Nice build video fam 💪🏾💯🔥
THANKS Coach💯🍻👑
Thank you so much for this I was hella scared to build mine I didn’t know how
🙏💯🍻
Were you able to build it fine?
cool bike,great fix bro
Thanks -Duke💯🍻
Just a suggestion, I would spin the battery 180 degrees so the harness is in the back. It will be better protected from any rocks/debris kicking up or something catching on it if you ever ride in the woods etc.
Appreciate the suggestion💯🙏🍻
@@KruseNStuffdoes this come with instructions
@@KTKLC Yes Sir. You’re watching it. Lol jk. There is no instructions other than other people’s videos.💯🍻
@@KruseNStuffoh. I’m trying to get the me for my birthday because I’m a kid and my dad has no idea about anything electric like the wires so if I get one I’ll be on CZcams studying!
@@KruseNStuffanother question, do you need power tools like that battery dewalt or can you use hand tools like screw drivers or something like that?
Got me one in Dallas I've actually got two but love em
Nice.🙏💯🍻
Thanks for the video. It does look simple. No programming of the controller or anything. The motor is a direct drop in? No modifying the swing arm to fit it? Will the 72v battery also just bolt in?
Very simple. No programming. Motor is direct drop in. I suggest putting motor sprocket on first, then setting the chain on sprocket, then lifting motor up and in place. No modifying the rear swing at all. I have seen some loosen or remove the rear shock to disengage rear swing to make putting motor in easier but not needed. The 72v 24ah ($1000 battery) will fit once top shelf is removed. Here is a link to me fitting the battery. czcams.com/video/0xQWxrOteus/video.html 🍻
One more vid like this and I'm abouta get my PhD from youtube lol
🙏💯🍻
Awesome video, do you think the battery pack is needed or can you use the stock one?
Appreciate it. 100% NEEDED. The battery is one of the most important & IS the Most expensive pieces. But you will not be disappointed. Well worth it. & Electro & Company is the real deal. They will help you with ANY questions you have. SOLID💯🍻
Did you buy a sprocket and if what size, love the vid keep it up
Yeah, I bought a 14t sprocket with it. These days I’m running 9/61 #35. Come a long way since then💯🍻
Just turned 15 so i had money and was planing to sell my bike and go for a cheap amazon 3000w 72v build on an mx650 but i preferred the rsf650 cause i only street ride. But after looking at facebook marketplace i found a rsf650 with the older version of this kit with the 48v battery and got it for $690 and plan to sell the bike still to get a 72v e&c battery for it
Nice. Sounds like a SOLID plan💯🍻
What battery size did you use? I was thinking about getting the 52 v with 13t or 14 t sprocket
I started off with the 48v 20ah until the 72v 24ah came. I have a bunch of videos with different batteries & different gearings. Im also selling my 48v 20ah battery & charger.💯🙏🍻
i see that you put the battery separate in the description so does it come in the kit or not
The 5000w kit has an option for a 48v battery or a 72v 20ah battery. I wanted to eventually tune it to be the Surronster 6000w kit and beyond. So I needed to get my 72v 24ah battery to do so outside of the kit.
did you ever end up selling your 48v battery and charger? I might be interested, lmk. Great video!
No we didn’t. Was selling it for a GREAT Price too. Nothing. So I worked around it and built my sons bike around it. VERY HAPPY with the performance. Glad it didn’t sell💯🙏🍻
Its nice. Did you have to use the same music as Surronster?
It is. And music is a vibe. Plus I knew what I was building, the 6000w Surronster edition but on the mx. Surronster is the inspiration behind the build. The music is also called, “On My Own” by Kyle the Hooligan.
Free NonCopyright music. Read description. Surronster gets his props as I wrote to others before you.
maybe i missed it but how do you wire in the voltage meter/key?
Sorry for the late one. There is 2 connectors. 1 is a bigger white one and the other is a smaller black one.💯🍻
could we be able to but the original black cover on the sides or somethings blocking it???
That depends on the size of the battery used. The 24ah, you should be able to.💯🍻
I can’t get my front caliper to line up.. How’d you get yours lined with the rotor?
What’s up man. Hmm. Idk what you mean. Didn’t have any issues with that. Did you get the hydros? Also, there is a screw on the caliper to align it. Hope that helped.🍻
Hey there. I got this kit for my son and it’s been taking more weeks than advertised. How long did yours take to ship?
The longest wait is getting to shipping. Once E&C ships it, you’ll get it within a few days. You’re just on a list. And they do in order from RPO. 2-4 weeks latest. I’m forgetting the exact time frame. But if you read the comments, I’m sure some asked the same question. WELL Worth the wait. You WILL NOT be disappointed. And they will help you with ANY questions or concerns along the way. They are the Real Deal. SOLID people over there.💯🍻
My battery came with the same adapter yours did but very very small , and won’t fit in my battery wires on my controller ? Can I put a new adapter on it ? Or
Of course. You need to match it to your battery.
You think i can use my own batteries or does it only work with the electro and co better
You can use your own battery. Do your research and get a battery equivalent to E&Cs or better, and you’re good.
Sorry to comment on an old video but im about to buy a 48v kit with the same kelly controller, 3000w my1020 motor and 48v/20ah 50A battery. Its my first build/upgrade to my mx650 and i want to have my 8yo daughter and wife ride it as well as myself. Was the 48v kit enough to do wheelies? Im looking for a good place to start before going up to a 72v. Will I be happy with the 48v kit for awhile or do i need to wait for another month for a 60v or more? Thanks in advance for the help and insight.
I’d go 76v right away. You will want it anyway. And you can always tune her down with ease for your son, your wife or even yourself to start. Plus there is the 3 mode settings.💯🍻
Recommend getting better suspension
If that’s a question, 100%. If you are recommending suspension, yessir, got a DNM air shock in the rear and IMO the best forks you can get for these bad boys. Appreciate it💯🍻
do you get the bike in the kit or do you have to buy the bike separately?
Separately. Electro & Company is just selling EVERYTHING you need to put in the bike.💯🍻
What’s the wire called that you put on the positive and negative of the controller
The battery leads. There is also a red wire from the volt meter that will plug into positive also.💯🍻
Can you use the stock batteries or do you need to upgrade?
No. You need at least a 48v lithium battery with an output of at least 150amps IMO💯🍻
How long do you think the whole process will take?
Not too long at all. I’d say carve out an hour or so. I took my time. Took some breaks. Enjoyed the process. Only thing I’d add is to take the rear wheel off to put motor in. Way easier.💯🙏🍻
I want to get this kit so bad how long did it take to deliver after you bought it?
About 3-4 weeks. These kits are AWESOME. I would go with the 76v EXTREME Kit & ease your way into it with your tune. Very easy to do now. Just a slide over in an app.🔥🔥💯🍻
Hey how fast would i go with this same kit and a 72v 40ah 100bms with a 14t sprocket and factory rear sprocket on mx650?
If I had to guess, I’d say around 40-45mph.💯🍻
What do you usually charge yours at on the dial I usually do 3
I used to do that too. But I have the 12amp charger. So I charge it close to all the way up with no issues. Saves a lot of time and can’t tell the difference either way. Except how long it takes.💯🙏🍻
I have a really important question for the battery did you put red wire on top of the other red wire to the controller or underneath it. Sorry if this doesn’t make sense
Makes perfect sense. I put the red wire already on the controller on top of the positive battery wire.
@@KruseNStuff okay thank you so much I can’t wait to get my finished
I bet. I can’t wait to get my 72v battery. Been running it on 48v & topping out at 30mph w/ the 14t sprocket. The difference with the 72v should be significant.🙏💯🍻
@@KruseNStuff when you put the 14t sprocket on did you have to get a different chain? And yea the 72v battery looks insane I really wanted that one, but I’ll go for the 48v for now
@@gavinsharp2537 No. but put the 14t sprocket on first. Then get the chain set on the sprocket before tightening the motor down.
how long did it take to deliver? if you remeber
I think it was about 3-4 weeks.💯🍻
If I buy a 48 V busless kit for an MX 350 do I need to buy a whole new battery?
Yeah, you need a 48v or 76v lithium battery also.
How long did it tank for your kit to be delivered? Because it’s almost been 3 weeks and it’s not here
Both kits I got took at least 4 weeks. So not too much longer. Worth the wait💯🍻
@@KruseNStuff thanks for your replie love the vids. Also another question we’re did you get your 15 tooth sprocket from? Much love t🤟👍
The battery leads that come on the controller are xt90 and and my battery came with the same one but smaller it is a xt60 adapter, can I just buy a new battery lead that is xt60 and put it on my controller ? It says the wires can handle up too 300 volts?
I have the same battery adapters just there not xt90s there xt60
Yeah. You can get a xt90 to xt60 adapter or just buy new leads w/ xt60.
Would this kit work with the Mx350?
It will if you find a way to make your own mount for the mountless my1020+ motor. Whether you have someone weld brackets in place or you bolt some on. I did do a build but with everything but the my1020+ motor. I just used the my1020 72v 3000w motor with brackets and used an adapter to fit controller. I’ll send you a run video and what I did. Pure Adrenaline -72v Razor MX350 -Electric Dirt Rocket -TRUE Mini Bike -Electro & Company ULTIMATE🔥
czcams.com/video/b6E44sbwhbU/video.html
What I did: 72v Razor MX350 Brainstorm -Electro & Company ULTIMATE Vs. Standard Connecting
czcams.com/video/4pJNxC7bPX0/video.html
My battery came with xt60 instead of xt90 and I got new controller leads which are xt60 but it says it can handle 300 volts but on the ones I bought it says 80 C and the leads that came with my controller are 200 C should I buy new leads which are 200 C?
By C I mean Celsius
Yeah I would.💯🍻
@@KruseNStuff thank u
Does this thing come with a charger? Where do you get one if not?
When you order the kit, there are options listed to the right. You choose what you want and don’t want. Sprocket, Volt meter, Battery/charger. When I ordered my kit, I ordered it by itself. When I then ordered the batteries separately. There was an option to include the chargers.🙏💯🍻
@@KruseNStuff sweet thanks! They actually emailed me back quick answering the same question. Great costumer service so far! Looking forward to getting the kit. 🤙🏼🍻
@@JRE0311 yeah man. SOLID💯🍻
does the kit come with a battery
You can get it with or without.💯🍻
How fast does it go
How fast it can go. 55MPH.
55t Rear Sprocket Speed Run! 15/55; Electro & Co. Ultimate Razor MX650/6000
czcams.com/video/A1U4RzS_tXY/video.html
What's the range you can achieve with one of these kits?
same here... this would be my reasoning for doing this... love to hear feedback as well ... thanks
Depends on how many amps the battery has. I think you could get around 20 to 30 miles with the 20 amp kit
Very descent range. Plus charging is easy & fast especially with 12amp charger. But I believe the 20-30 mile range with 20ah battery on eco mode or mode 1. I think that’s what they say. I have the 24ah battery. I haven’t done a range test personally. I have mine geared up high for speed at the moment. Definitely won’t get that range. Well worth it all the way around. Just a blast. I ride it everyday💯🙏🙏🙏🍻
How long does it take to charge
When did you order the kit? Curious on the lead time now
I ordered the kit without battery on may 26th. Took about 3 weeks to ship and got it in 4. But may be longer now. I ordered the 72v battery on May 31st and should get it soon. I order the 48v battery around the same as the 72v and got it within 2 weeks. Hydraulic brakes came right away.
Worth the wait. Just get the order in ASAP.💯🍻
@@KruseNStuff placed my order for the surronster kit on June 18th, picked up a mx650 with dead batteries for $100 and hoping I can make it work
Wow. You stole that MX650. I’d buy 100 of them for that price. Lol. If it only had dead batteries and everything else is solid….it will just be a drop in upgrade. Be a whole new animal.💯
At 8:25 in the video what’s that wired called or does it come with any of the electron and co parts ? Where can I get it
Those are your battery leads. It will come in the kit. What battery are you going with?
@@KruseNStuff the 52 volt ! And thank you also!
@@user-qe8xq4nz7r Nice Bro. ENJOY! It’s a BLAST! You’re Welcome. If you get in any binds, let me know. Should be a breeze though.💯🍻
@@KruseNStuff thank u very much and I definitely will shoot you a text if do brotha man🙏🏼
@@KruseNStuff if so brotha man ***
How does it charge
With a charger. I got the 12amp charger for faster charge times.💯🙏🍻
Do you know what the difference between the 2.0 and 2.1 kit?
I don’t. Sorry.🙏💯🍻
@@KruseNStuff Thanks for replying! I’m guessing it’s incremental; but I bought what I think is a 2.0 kit a couple of months ago. E&C are good people, so I’ll check with them.
Yeah they are. That would be best. Interested to hear what the difference is actually.💯🍻
@@Nohoze any word yet?
@@irocss85 Hi. I finally contacted them, and the difference between the 2.0 and 2.1 kit is pretty small, but awesome nonetheless (I wish I had waited a couple of months). They added a temperature sensor and communication with the controller so it can both send data and provide a motor cut off should the motor reach a critical temperature. A pretty useful addition if you ask me.
Is it really 1800 for the motor kit ? Thats insane
Worth EVERY Penny & then some. Remember the 72v battery is a stack alone. FASTER & Quicker than a Surron which is $4500💯💯🍻
@@KruseNStuff yeah maybe lol . Off to the craps table i go haha
I thought it was 550$ (it’s on sale for 500$ rn)
How is the motor and battery holding up?
Very well. I know their new batteries are 76v also now. Which is nice. So instead of 72v charging to 84v. It’s 76v charged to 88v.🙏💯🍻
@@KruseNStuff so the 1000 dollar battery is holding up 👍
@@anthonymoy4471 YESSIR💯🍻
I would like to know what that kit cost please
The 5000w kit is $579 without the battery. The 72v 24ah battery is $1,000. So about $1600 plus the bike itself. Definitely suggest FULL suspension upgrade. What I use is in more recent videos.💯🙏🍻
DOOOD, you need to invest in some tools lol.... Just came to give you a hard time cuz that's what I do. Recently acquired a garage at my apartment and all the sudden I have 5 bikes sitting in there. Just got an mx650. Not sure what I'm doing with it yet...
LOL. You’re not the first and won’t be the last. I make do. I was missing a few pieces for sure. But AGREE. LOVE the bike, LOVE the E&C upgrade. Just need the 72v battery.
Ummmm isn’t this the sur ronsters intro music tho…..be a 🐺 not a 🐑
Very good Jeff. 👏 Sur Ronster is the whole reason and inspiration for the build. Hence the intro music. Which is by Kyle the hooligan, not Sur Ronster. I use whatever music I feel fits the moment. ✌️Read Description. He gets Shouts constantly. Stay in your lane.
Yeah
do u have a setup you would sell me
Money talks. What are you looking for exactly?
How you stole sur ronster into smh
🥴
Music is a vibe. I knew what I was building, the 6000w Surronster edition but on the mx. Surronster is the inspiration behind the build. The music is also called, “On My Own” by Kyle the Hooligan.
Free NonCopyright music. Read description. Surronster gets his props as I wrote to others before you.
Got to be careful around these intro police. Crazy out here.😂🤣
Yeah bro there crazy
@@KruseNStuff nah i thought he had second page yall make the same content you have the same into how unique but still love wat ya do