Video

You’ll need a 36v battery. Or (3) 12v batteries. So if you have (2) 12v lead acid batteries, you can add one.

@@KruseNStuff ok thanks for letting me know is it still ok with the 24v motor

@@Rydawgy211 I’d rock it until it dies and upgrade to a 36v motor when you’re ready. Will last a lot longer and can gear it higher when you do.💯🍻

thanks for letting me know also would the 36v motor that’s made for the crazy cart xl compatible with the normal crazy cart?

I do lol. I’m 5’11” 165lbs.💯🍻

Thanks bro and was it hard to mod? Do you recommend a 1800w kit or a 3000w?

Definitely💯🍻

@@KruseNStuffthank you

@@KruseNStuffand also how fast do you think it would go?

@@BooIIinM probably anywhere from 20-30mph depending on your controller and gearing.

@@KruseNStuffwhat type of gearing should i get? because the controller comes with the kit and say speed is maximum at 5400rpm and minimum is 4300rpm

No he only goes up to 48v with these controllers

AGREE🙏💯🍻

@@devonanagli858 it can with overvolting. And long rides and off road. If you want to avoid that altogether, don’t OverVolt. You can use a 48v motor, 48v 1000w controller and 48v battery. You can gear her up high and be good. But the higher you go, the less torque you get.💯🍻

Yeah it will. Hardest part will be putting the motor in. You will have to drill bigger holes to get new motor in and some spacers. Or you can get an adapter for $80. Make it way easier. No hole drilling, no spacers, the adapter is the spacer. And hardware included. Here’s a link.www.ebay.com/itm/305502166606?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=TYHCODIJSdG&sssrc=4429486&ssuid=axtom1U_SJq&var=&widget_ver=artemis&media=COPY if the adapter is too pricey, you can drill the holes yourself and get (4) 5/8” spacers. That will get the motor above the frame.💯🍻

Thank you, and many miles do you think it will last?

What ah did you have?

8ah 48v

@@Neo-ll3ip probably 10-12 miles. But I’d be guesstimating

Nice. ENJOY!💯🍻

I wanted more power like 50-60 mph can I achieve close to 45-50 with 3000watts and 72v

@@TylerParker-bi5ko on a mx350? The smaller wheels and tires make it hard to see those speeds. It takes VERY HIGH gearing to achieve it. And wouldn’t really suggest doing it with that motor. I really suggest the E&C “One” but you would need #35 for that. So I suggest the EC4P v3. DOPE. I have seen 58mph on a mx350 thus far. Upgraded brakes tho. Front and rear. And bigger front wheel. I’ll send you a link to a couple vids.“Just Struttin’” E&C TruMoto Little Bit Razor MX350 -1st Ride! EC4P, Eon 72v24ah Lithium, SX500 Fork czcams.com/video/sqel-GueGlY/video.html E&C ULTIMATE Razor MX350 w/ EXTREME EC4P Motor; KellyKVD-72v24ah-15/44-Welded FW; Speed Run @ 5:03 czcams.com/video/C9_OXkoy9nU/video.html

@@TylerParker-bi5ko may have to upgrade the controller tho.

@@KruseNStuff your really starting to persuade me. I’ve been watching all your videos lately on the mx350 and it’s one of the reasons I’m starting this project.i checked out the motor and it said it was rated for some crazy how wattage or power. That being said I don’t know how I would be able to up my battery size. If I got the ec4p motor what speed control do you recommend getting.

E&C MY1020+

Nice. As long as your motor has a mount on it, you will just have to drill bigger holes. Make sure you lineup so your chain will be str8. You’re going ti want to grab (4) 5/8” aluminum spacers to put in between, so you clear the side of the frame. I can shoot you a link to the spacers if you want. Other than that, let me know what you need.💯🍻

Here’s the link to the spacers.a.co/d/08agI3WK you will need (4) bolts and nuts. These are what I use. a.co/d/08FzJWov Tgey are longer than needed but I like that. I also use red loc tite. You may have to bend the sides of the bottom tray down a bit to tighten nuts. You’ll see what I mean.💯🍻

I’ve also seen something like this around eBay for $80.www.ebay.com/itm/305502166606?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=TYHCODIJSdG&sssrc=4429486&ssuid=axtom1U_SJq&var=&widget_ver=artemis&media=COPYI haven’t used one but may be something you could use instead idk.

Ok. Obviously the mx650 would be a way better option to upgrade. The size & Suspension are a game changer. The mx350 is doable but a little harder to mod motor wise. What system are you thinking of going with? Meaning motor, controller, battery?

This is Traxxas’ Fluorescent Red with fluorescent yellow underneath.

@@KruseNStuff I tried the yellow undercoat.. And it helps a lot. I'll look into the Traxxas paint 👍

Big fan of the Traxxas fluorescent paint🔥🔥💯🍻

Yeah, it’s really easy to do. Pour fluid in and keep pumping the lever until all air bubbles are out. Here’s a vid of me doing it on a different bike. Skip to 16 minutes in for that part.czcams.com/video/MaOlUiarBCM/video.htmlsi=wZ4E8Jzz-LkpyAXT

🙏💯🍻

🙏💯🍻

Definitely. What rig do you have? The mx350? Or 650?

@@KruseNStuff mx350 i dont want anything from electro and co because they are very expensive i found some things on amazon and it came down to 300.

@@KruseNStuff mx350 i dont want anything from electro and co because they are very expensive i found some things on amazon and it came down to 300.

I’d say anywhere from 35-45mph. And it only gets better if you upgrade.🔥🔥💯🍻Use code KruseN5 if you’re shopping at E&C💯🍻

@@KruseNStuff yeah it’s for my other bike I’m building

What rig do you have? An rsf350? If so, it’s a 24v 350w motor. So I’d get a 36v OverVolt kit. Which is a 36v controller & a twist throttle. You will need another 12v lead acid battery to do it. Or the better option, is to get a 36v lithium battery. Cut the battery ends off of controller and attach the ends that match your battery of choice. You will see 20-23mph easily. I believe links are in the description.💯🍻

Plus you can gear it up and see more💯🍻

A bigger motor or drive sprocket will get you more top end speed, less torque. A bigger rear sprocket does the opposite. More torque, less top end. So a smaller motor sprocket, more torque, less top end.

I’m not familiar with the e ride pro but I believe it will. 3 phase and a hall sensor. The hall sensor connector being different would be your only issue, if it’s different. With that said, I’d write E&C a quick email and they will get back to you with an answer pretty quick.

No. You need an upgraded controller as well.

@@KruseNStuff what will happen if I dont

Probably won’t work at all. The stock controller is for 24v, not 36v.

“Just Struttin’” E&C TruMoto Little Bit Razor MX350 -1st Ride! EC4P, Eon 72v24ah Lithium, SX500 Fork czcams.com/video/sqel-GueGlY/video.html

E&C ULTIMATE Razor MX350 w/ EXTREME EC4P Motor Top Speed Run On 15/44 -Short Version Of 1st Run czcams.com/video/WqWFDWRXzS0/video.html

Yeah. May have to mod it slightly. Shave down the spacers. But bolt pattern lines up precisely💯🍻

@@KruseNStuff spacers on axle or in the brake?

@@Michael_2211 the caliper adapter. Very easy.

@@KruseNStuff oh okay, no problem, thanks, I’ll give you a sub

💯🍻

You can get it with or without.💯🍻

Gets you about 5MPH faster. So about 10mph. It’s a kids toy. If you want to make these things FASTER FASTER, you need a different kit.💯2 Speed Runs -E&C EXTREME Min-E Quad Is A 🚀-Noisy Cricket, EC4Pv2, Eon 72v34ah MOLICEL, 9/54 T8F czcams.com/video/Qa0cSYti-38/video.html

“FULL Ride” E&C EXTREME Min-E Quad Trail Ridin’ -EC4Pv2, NoisyCricket, Eon72v34ahMOLICEL; SpeedRuns czcams.com/video/6ILvdP9DKUg/video.html

Appreciate it💯🍻

😂🤣That motor hated life right away and keeled over in about 5-10 minutes.“Don’t Do This!”-1st Run On 15/44 -E&C EXTREME “Black Edition” Razor MX15KW/20HP -TNC,EC4Pv1,76v40ah czcams.com/video/XWuR6oY7DQc/video.html

Around 5-10mph. Should be closer to 10mph. With that said, This is a 3000w 72v MY1020+ Motor w/ a 72v24ah lithium battery & ULTIMATE Kelly KVD Controller.💯🍻

@@KruseNStuff But so then should i go for a 13t or 14t cause i want to still be able to wheelie but also have some sort of speed boost. And also because my motor is only a 2000w 48v i dont know exactly the sweet spot for sprocket sizing as each engine is different powered.

@@noahwasborn7484 all you can do is scoop a 13t and try it out. See what’s up. If you like it, you keep. Want more speed and torque still descent, go up another tooth. That’s what I do.💯🍻

Yeah, I have a set of those on my Electric mini quad. Cost me about $400. They will fit the Go-Kart as well. But the treaded kart tires are slowly becoming street tires already.😂So I’ve decided to just roll like this. 4 lug sounds DOPE. Awesome rig. I’m sure many people well start figuring it out and making the conversion.🔥🔥💯🙏🍻

@@KruseNStuff they’re $100 for all 4 on your sxs. Are you running a 12v converter or a contractor? And yeah I will change the controller pretty fast tbh. I didn’t think these karts could handle over 40mph, now I’m aware it’s my blown strut after seeing yours. Follow my page I’ll make some content so maybe I’ll be able to give you ideas. I’m upgrading a bunch of stuff here shortly.

@@GraphicFrost I got mine mounted with wheels. You mean for my lights? 12v converter

Nice. Love this thing. You’ll want to upgrade your controller at some point.🔥🔥💯🍻

Pegs feel fine. Plenty of space. Every once in awhile I hit my shins on the edges coming down from a wheelie. Nothing major. I may put some thin padding on for that. But only happens every once in awhile💯🍻

@@KruseNStuffdo you think if you placed the battery a couple inches closer to the forks then ur pegs would clear perfectly, I want to get the battery but the fitment is absolutely nuts 😂

@@Datnycg I have the tray acting as a holder for the battery. So it stays str8. So it’s really perfect for me. I wanted as far back as possible for weight distribution for wheelies. The way I have it, you may have an inch or so to work with but you’ll lose that hold. This battery doesn’t move at all. Non issue for me. Padding would just be an added luxury that I’ll most likely never do. It’s The Sh*t. If you’re thinking of doing it, do it. It’s that AWESOME. All I can say.😁💯🍻

@@Datnycg use code Krusen5 if you’re shopping at E&C.💯🍻

Get the Noisy Cricket. The little bit is DOPE but the Noisy Cricket is where it’s at. 100%🍻

@@KruseNStuff well I’m kinda on a budget so if the lilbit with 72v can reach 45 I’m cool with that but I just don’t know cause it’s my first build

KruseN5 is my code. If you need a discount.💯🍻

@@pwdakota94 Definitely will see 45mph and then some depending on gearing.

@@KruseNStuff I’ll use it . But do you think that would reach 45