Top 2 Reasons Why Your Engine Valves Bent
Vložit
- čas přidán 9. 10. 2023
- Learn the causes of bent valves
❗️If you find this video helpful, I would appreciate donation to the channel or a $uper Thanks that can be found below the video.
Cheap Way To Check For Bent Valves Without Removing Cylinder Head
• Cheap Way To Check For...
💰Save money on your car/truck maintenance and repairs:
Top 3 Reasons Why Your Car Won’t Start
• Top 3 Reasons Why Your...
Don't let Timing Belt Failure Happen
• Don't let Timing Belt ...
3 Symptoms Of A Bad Water Pump
• 3 Symptoms Of A Bad Wa...
Don’t Ruin Your Engine By Neglecting Engine Oil Filter - Simple & Cheap Maintenance
• Don’t Ruin Your Engine...
Why Does My Car Battery Die So Fast
• Why Does My Car Batter...
Replace Timing Belt Before Engine Damage - Know Signs & Symptoms
• Replace Timing Belt Be...
Watch Out For Carbon Build-up That Can Cause Misfire
• Watch Out For Carbon B...
Top 6 Gas Saving Tips
• Top 6 Gas Saving Tips ...
Fix Sticky /Hard To Push Pedal - Simple DIY
• Fix Sticky /Hard To Pu...
Look what happens when you neglect your engine oil
• Check and Change Your ...
Gas Pedal Sticks? Car Jerks? - Easy DIY To Make It Smooth & Safe
• Gas Pedal Sticks? Car ...
What Does An Exhaust Leak Sound Like? - And How To Find It
• What Does An Exhaust L...
Clean & Test A Fuel Injector - Best DIY
• Clean & Test A Fuel In...
Check your Engine, Coolant, Transmission, Power Steering Fluid, and Brake Fluids
• Check Your Car Fluid L...
Blown Head Gasket - Don’t Neglect Your Cooling System- Look What Happens
• Blown Head Gasket - Do...
Don’t Get Stranded With a Dead Battery in Winter - Do 3 Top Battery Checks Now!
• Don’t Get Stranded Wit...
What Does Engine/ Serpentine Noise Sound Like And What Does It Mean? - Squeaking & Squealing Noise
• Serpentine Belt Squeak...
Always make sure your lug nuts are TORQUED and not done with an impact gun
• Don't Use This When Ch...
How to diagnose and replace wheel bearing going bad on any car
• Whining, Grinding Nois...
Learn why the tire pressure is important and how to check it in your car
/ bm8wnjripj
Remove and replace Broken or Stripped Wheel Stud on most cars
• Broken or Stripped Whe...
Cheap Way To Check For Bent Valves Without Removing Cylinder Head
• Cheap Way To Check For...
Fast and Easy Way to Restore Faded Car Paint and Scratches - With Minimal Tools
• Fast and Easy Way to R...
The Best Way To Fix & Repair Broken Wire in Your Car - Soldering Car Wires Together
• The Best Way To Fix & ...
Car Air Conditioning AC Not Working? - Diagnose And Maintain It At Home
• Car Air Conditioning A...
Replace Windshield Wiper Blades in 1 Minute
• How To Replace Windshi...
✅ Used Car Buyers Checklist - Private or Dealer - 5 Top Tips
• Used Car Buyer's Check...
⁉️QUESTIONS
If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the future.
#motorcarnut
⚠️Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video. - Auta a dopravní prostředky
Once again, your videos are superb! Keep them coming. You have educated me on a lot of stuff sir. Thanks! You should make a video on how to remove the valves and springs on a cylinder head and what tools you use!
Thanks, will do! And really appreciate your feedback!
Impressive I just learned this. I’m doing everything on my N20, you’re teaching me everyday 👍🏼 Thank you.
Awesome! Welcomes aboard! Thanks for all the feedback very much appreciated!
Love it-
Thank you!
Thank you for your well made, informative videos! I was hoping you might be abe to answer a question for me. My timing chain jumped on my 2012 Audi A4 B8 and bent the valves. During the process of the RR, could the oil intake/outlet pipes on the turbo have been damaged? When I got my car back from the mechanic, it started hemorrhaging oil! Thank you again.
Thank you for the comment, appreciated!
Yes, if they did it sloppy the oil tube can be bent and then leak, absolutely.
thank you very much for your reply!
@@Motorcarnut
No problem, good luck!
@jodytho no problem
Hello bro had diesel poured in my audi a5 2lt tfsi and ive changed, throttle body, hpfp, 4 new spark plugs, coilovers were ok. After diagnostising again 2 cylinders not receiving compression. You think its the pistons or bent valves? Btw everything has been purged and new petrol re inserted already
To find out I would do a leak down test on those two cylinders. I have video on leak down testing if you don’t know have to do it.
Hi, I’ve got a 351 is there a way to check the valves without stripping down the engine
Yes with a bore scope. I have a video on that if you want to check it out. They are cheap nowadays and a good option.
Sometimes you can just look straight through the spark plug chambers and see if the piston dishes have dents in them. You’d notice exactly what you see in the video here, the pistons having one or two parts on them that are completely clean
I’m wanting a better understanding of what my engine is doing, I have a strange noise coming from the intake side. I could hear it through my air intake, is it possible I could send you a video somehow and you could take a listen and I could further explain what happened?
Yes post it on your CZcams channel and I’ll give a listen
Is that why gas seats on the pistons?
It can be , yes
Why bent only 5 inlet valves. Are the spring the same for for exhaust and inlet
It’s because the intake valve are bigger and usually get hit first
Could my valve be bent because milky oil keep getting into cylinder four
No but could have a blown head gasket
Gaskets
Just Found out my 98' Toyota Rav4 2.0 L is a Non-Interference Engine.Yes!Good News I suppose.My Belt Timing Belt busted and I was like "SHIT.."😢(Already had the "Piston" inn Back of my Mind.
Yep most are, hopefully didn’t cause total destruction
I have a 2007 Mitsubishi eclipse the timing belt broke and bent valves what would be best and cost wise way to fix would it be repairing valves or changing out head I’m not sure any input would be great thank you in advance I replaced timing but now horrible noise says misfire on 2 and 4
Thank you! Depends on your experiance, I would replace the bent valves but if you want you can get a salvage head and use that.
@@Motorcarnut if I put another head in would I not need to do valves for pups that be the cheapest route again thank you for taking time to respond
@letthemhatebullyz6175 as long as that head was off a running car but make sure the valve stems seals are not leaking as well.
@@Motorcarnut sounds good thank you again