Where & How to Mount your Radar Detector
Vložit
- čas přidán 29. 07. 2024
- Let's talk about the best locations to mount a radar detector in your vehicle, as well as how the detector should be aimed and oriented for best performance.
Best Radar Detectors: www.vortexradar.com/best-rada...
Website: www.VortexRadar.com
Facebook: / vortexradar
Twitter: / vortexradar
Instagram: / vortexradar
#RadarDetector #VortexRadar #RadarDetectorTips #ValentineOne #EscortRedline #SpeedingTicket #SpeedingTickets - Věda a technologie
Love the channel. Been running radar detectors for 29 years. Never got a speeding ticket. Three warnings total. Detectors absolutely save you from laser. You’ve got to pump the brakes quickly though. May be easier for me though because I live in the 14th biggest city in the US. Cops have to guess the speeding bogey.
Great info Vortex. Your videos are spot on and very informative as you def know your stuff. Keep up the great work!!!!!
Great video! I mount my V1 high next to the rear view also.
This channel is going to blow up! The one and only countermeasures channel.
Thanks. Great tips
@David S: That's a great suggestion. I don't actually have any experience with alternative mounting solutions, but I have seen others post about them online. There's prebuilt solutions like the blendmount, custom homemade brackets, people have modified existing brackets to fit the Max, and I've even seen people wedge something between the Max and the stickycup to keep it from vibrating. I've never explored those options so you'll find the best information on the forums from people who have. :)
VortexVortex because my only practical 12v plug in my car is in the glovebox, I had to put my detector in the bottom corner on the passenger side. Do you have any thoughts on how this could be negative for performance? Thanks
If you have to do that, make sure that it's pointed straight and not off to the side if it follows the curve of the windshield. Straight and level is the key.
Thanks
Just stumbled across your channel and I love your vids. It wouldn't let me comment on your huge comparison video, but I wanted to give huge thanks for putting the time and effort into all that testing you did. :)
+Blake Smith thank you! :)
I've always wondered of where to mount my v1 on my fusion , I have it down low , but also have had it in the middle of the windshield , having it up really makes a difference?
I use a Scorche dash suction mount with magnet on bottom of detector....Works every time 👍
Great information. Thanks so much.
I love on the box of the instructions it says not to put it behind the tint on your windshield because it can affect the performance of your radar
Thanks for the reply! Love your awesome video's!!!!
Awesome video... learned a lot... thank you
Hi does the redline Ex magnetic mount fit nice and high above the rear view mirror ?? and after you attach the detector can it be still be seen anyone out there?? to be stealth any answers thanks
Another thing to consider is that some states have laws prohibiting the mount of anything on the windshield except for certain locations. I know CA is on of those states.
CA basically says all things are illegal except tires and rims.
BigD Travels It's actually illegal in numerous states, not just in CA. Many states completely ban any windshield mounts, period. Like Kyle said CA allows for some locations on the windshield.
not "illegal",... rather "undocumented"
SoCal Roadcam Tyree hffgyu..?.Nmnbvvv,
Q Q. MCA NHWDQTTR TY TT T K. D djbgcshcdabjcafgjdghdghdSDasdwadjdfjdfrfhjjkl
MNNNNNMEMMZNMZMZMMNBBVVVGBNNNJNNNNNNNKMKJUHRRFHJJJHHHJNNKWKAQOALQlaa
Ourwwwsedffffggghjnnnn. M
Kkkkkmmmkkkkkkkkiiihhggjknbgffff
under the hood has been a fav location
Thank you for sharing
With the new uniden r series single cup mount which allows for a lot of play in mounting. In your opinion do you think mounting it on the left side of the windshield like you demostrated with the redline but being able to line it up straight and level there would be any performance issues?
@travelcam111 be great if you can do a video about alternative mounting solutions. I have a Max 2 and it rattles incessantly. I'm aware of blendmount but it's really expensive.
When installing in front of rear view mirror, will the rear view mirror actually block the radars availity to detect from the rear?
What phone holder do u use and where can i get one?? What about the v1 mount
i have it in the middle of the windshield, so you can see the buttons on top, the genevo Max with magnetic attachment is really handy, you can remove it in a zippy
super helpful video, thank you! :D
Good video sir , do they still sell grille mounted radar fork's ?
Great video and channel - subscribed! I noticed you use a V1, Savvy, Concealed Display and the bluetooth dongle all at the same time. Do you use any special splitter on the Savvy ACC port? I'm using a regular RJ11 splitter on the same setup and am having problems with my V1 display randomly mirroring the CD when it should stay dark.
+Jason Hall Welcome! Yeah a splitter on the Acc port for both the CD and BT adapter will do the trick. czcams.com/video/csETeTRmzGY/video.html
Thanks for the video! Is there such thing as “too high” for taller vehicles, or will that all just improve picking up the radar frequencies?
Not really. It'll do even better in a tall vehicle. I've even seen someone done a remote install on the roof for even better reception, haha.
who makes that suction cup mount with the 4 arms with the letter R on each arm?
Great video, I found it very helpful.
If I may ask, which visual alert device is it that you have mounted?
I'm looking to see if one works with the Uniden detector which your test showed as a very good detector.
Thanks!
That's the V1 concealed display. It's one of the accessories available for it.
I have a Rove R2-4k dashcam. Don't hate it was a Xmas gift. Saving for a Blackvue. I just bought a escort max 360 used on Ebay for $340. I'm thinking of mounting 360 higher toward rear view mirror & dash cam lower towards dash. Worried about the 2 interfering with one another. Or should I mount dashcam higher & 360 lower? I will be using cigarette splitter & 2 cables to power the units. Plan on hardwire later when I get a better dashcam. Any advice will be welcome. Love your videos they r well thought out & very informative!
The only place you never mention is the visor Mount for the Valentine One, either passenger side or driver side. I hate using suction cups because they always fall off the windshield . I’ve been using my original valentine one for years on the passenger side because I use the driver side visor to block the Sun. My other problem I have is if I have the visor Mount on the right way. According to the picture on the valentine site, it looks like you slide the bracket from the window going towards the passenger. I’ve always done it the other way because it was easier to remove. Do you know what the right way to use the visor Mount? Thanks for the help in advance. Waiting on my gen 2. Giving my daughter my old valentine one
My favorite thing about the higher mount is that cops don't see it when looking into your car! I am military and drive on base every day and need to keep mine out of sight if I don't want to remove it every day.
How high is too high? Mine is above the RVM and the windshield frits. There is a bit of plastic in front of the front right corner but mostly clear. The detectors rear antenna mostly is clear but the sun glass holder hangs pretty low so it may block it a bit.
I have a cobra one of the new ones should I mount It near my review or near the bottom of my windshield it’s a 360 laser so I was assuming up high since it can catch the back of my window am I wrong? Anyone?
Rear laser detection from a RD is a gimmick, but yes, it will technically do better up high for that so it can see over your headrests. That said, it still won’t help save you from tickets. For that you need a laser jammer.
Is it ok to run the radar detector at a 90 degree angle?
Do you have a video or can you explain how you have that V1 wired up like that? I would like to do the same thing. Also, what do you have mounted in the rear window? Thanks.
+Omaha Basically just plugged into Savvy. I have a splitter in the ACC port to split it to my concealed display and BT module. Pretty straightforward. I could do a video on it because people ask all the time. :D In the RVM is my rear dashcam. ;)
@Brenda Gutierrez, happy b'day! The V1 will be a MUCH better performer. Take the time to learn about how to program it as well (check out some of my other vids) and that'll help you get both even better performance and reduced false alerts.
+Vortex Radar
The thing though with mounting high, is with laser, you might hinder your laser detection if the top of the windshield happens to have blue tint.
Laser detection on a radar detector is virtually irrelevant in practice. You need laser jammers to help with laser.
Vortex Radar
But that is assuming the person using the detector is speeding. Some of us drive the limit and like to alert others over cb radio.
Cool. :) I like your username by the way. Red star. :)
My brothers, Whistler C90 was mounted low in my truck when I borrowed it and on the highway we picked up a cop shooting laser at the 3 or 4 cars ahead of us which gave me time to slow down and kept me from getting a ticket. So It can sometimes save you from a laser when mounted like that depending on the circumstances.
I just purchased a Beltronics STI Magnum with the latest software upgrade and they have changed the body to plastic which is even better because now there won't be any heat issues either.
I have an F150 and will be hard wiring it so I'm trying to decide where to mount it, I'm thinking about going up in the middle just enough to clear the back headrests when they're folded down. If that appears to high I may keep it down a little lower.
Love your videos and all the information you deliver, thanks.
You mentioned a laser jammer in the video,could I get a recommendation? I'm currently running a V1 in the same upper position in a Audi A4
AntiLaser Priority for sure czcams.com/video/qvyBo8QgI_E/video.html
Thank you for the clarification. In my state - you can't mount the detector on the RVM or the windshield. Dash or visor only. Any recommendations for me and my Uniden R7?
Get the Blendmount geni.us/Blendmount
Great background info on mounting suggestions and why, thank you.
Had any experience with the Snooper 4Zero, good or bad ?
Not familiar with that unit
Jason.m Walsh Actually, found some info on it. :) radarandlaserforum.com /showthread.php/5938-Snooper-4Zero
What mount is that? The highest one ?
if I have my detector mounted on the rear view mirror. should I aim the detector at a downward angle or straight and level?
+mokster69 straight and level baby 👍
hey vortex, i have a question, i have the same exact mirror and car and i was wondering where the ground contact and the switch +12VDC Contact is
Teh Kenji Sorry I have no idea. I've never probed into the mirror wiring. You can probably find some docs googling online though. or probe with a multimeter to find out. ;)
mirror spot means that when you flip down the shade it blocks it
What about mounting on the rear of windshield?
I have an escort max 360 and I was wondering where is the best spot to place the radar detector to get a good ka band signal?
Up high by the rear view mirror.
Random question: What is that thing you have hanging down the back window... I can see something in the rear-view mirror, rectangle shape, with a cord to one side, but I can't make out what it is?
+Pusheen Rules That's my rear dashcam. It's the itronics ITB-100HD. I run one in the front and another in the rear. czcams.com/video/iaYiRffCnFE/video.html
I mount mine me up near the mirror. My cord is over the mirror. They don't block my vision. And I remove it from the mount when I park. 1) to not advertise it and 2) to put my sun shade up.
blueduster74 I do the same. I put my sunshade up even when it's raining. Basically everytime I park. Got my windows tinted. Lots of noisey and thieving ass hats here in the Bay Area.
What about an anti slip mat sitting on the dash? My Uniden R3 seems to work okay with it.
They don’t always keep the detector leveled properly and they can damage people’s dashes. Be careful with those.
Awesome video, you've been a huge help since I've began looking into buying one. Two questions for you.
1.) Radar Roy stated that gps enabled detectors work better low on the windshield because of the clear view to the sky. Is this true? I would like to mount it where you said you prefer it at but apprehensive due to that statement. I don't think it's a big deal but maybe you have insight on it. (I have a Toyota Solara coupe so it's a low car like yours.)
2.) I have a remote starter installed in my car. The sensor for it is placed right above the rear view mirror on the glass. Can I simply use that cable for my radar detector instead? I don't know the details of the cable or remote start off the top of my head but if that's relevant I can find out.
Sorry if this has been asked, I'm having a hard time sorting through the comments on mobile. Thanks in advance!
1) It shouldn't be too big a deal. Try it. If there's issues, run it lower.
2) I don't know the details about your remote start system. You want a source of 12v power when your car is on and 0v when your car turns off.
Vortex Radar thanks for your reply! Using your info I was able to figure it out, very much appreciated. Look forward to your future content.
For gps to work precisely you need a clear view of the sky to get signal from the most satilites possible. So they don't get better detection performance, however the GPS signal is degraded. All it means is the filtering location less accurate (like a 3ft difference)
what about behind the dot matrix above the mirror will that hinder sensitivity?
czcams.com/video/Dd5YyLgyw5E/video.html
Do you have a way to power the Viofo t130 and uniden r8 with one power source?
They can both plug into your fuse box, but they would need their own individual cables.
So in a state where there going to get you for obstruction of view where can you really put it?
+Chapin Demetrius Please check your local laws for details.
I have found the high mount at the side of the rearview mirror as you have it to be the best. It also gives a direct view out of the rear of the vehicle for pings from behind.
Escort x80 manual says to not put it behind the tinted part on top. Which sucks because I was planning on putting it up top like yours...any advice?
Do Windshield Tint Strips or Dots (Frits) Affect a Radar Detector's Performance? czcams.com/video/Dd5YyLgyw5E/video.html
I find your videos very educational and useful in the real world. What is the name brand of the mount you are using to hold the phone? None of my phone mounts are holding together anymore.
By the way I've bought the Uniden R3 from your informative videos, and I also use my Escort 9500ix alongside at a little distance from each other both as my daily driver detectors.
I'm looking at buying a DFR6 and I don't know if it comes with a mount. I would like to mount it to my windshield near the bottom like where you have it in this video. Wondering what kind of mount I can get. Thanks
It comes with a suction cup mount to attach to your windshield. :)
the mount it comes with sucks - you might have to but a third party version
Can you put your sun visor down when its high like you have it?
Not in my car, but in other cars yeah.
walks by vortex's car and takes a glance inside and sees 20 different radar detectors in the car XD. Nah but your info is very useful. Thank you!!
So Vortex, I've watched a bunch of your videos, read a bunch of your comments and still want to ask what the best detector I can get. I know you said the best bang for your buck is the uniden LRD950, but I dont want to skimp out just because I want to save a few bucks, especially if it will cost me in the long run. While i dont feel like paying 3,4,5 or even 600 dollars, if it will be truly beneficial to step up to a higher tier I may choose to go that route. Any suggestions? thank you.
Tim Sharky Productions The best detector out there is the Stinger VIP, but that starts at $3000 and only goes up from there. If you want something in the more traditional range, it's an answer that people always ask and it's a question that I simply can't answer. It's the same reason I can't tell you what the best car is. The best detector is the best detector for YOU. I've done a couple videos comparing the V1, Max2, and Redline. Watch those and decide which features you want most.
One more suggestion you should do a video on the veil anti laser coating you can apply,supposedly it decreases your car's sensitivity and range to LIDAR, any opinions?
eww, not another one. That stuff is awful and I don't recommend it. Here's a video of how it looks being applied to a license plate, effectively blacking it out: czcams.com/video/ViQz7UtR25k/video.html
and if you want to see tests with it, check this out:
www.rdforum.org/showthread.php?t=52183
www.rdforum.org/showthread.php?t=42919
is it true that your not suppose to mount a radar detector on the tint strip...for instance where the rear view mirror is located?
+Beverly Brown That's actually a great location
Hi it would be nice to see some installed detectors thanks.
For this it's different for every car. Install in your grill with a clear view whenever possible. If you want to see installs, check out these threads: www.rdforum.org/forumdisplay.php?f=39
I have noticed that every Uniden R 1 or 3 videos showing great sensitivity while mounted lower on the windshield and close to the dashboard. I run mine up high as you prefer in this video. I am curious if anyone has done any testing with the Uniden R 1 or 3 to find out where the best position is for radar detection. Any thoughts on this anyone?
I was wondering about that also. I have my R3 right above the RVM.
Roberto Tamil curios about this too
Arsenticx21 I think the reading should be even better when it comes to KA & K bands since it's higher. But worse when it comes to laser since it covers around 3 feet of radius and cops usually aim at license plates.
radartest.com/article.asp?articleid=100583
I bought the radenso visor clip for my R3....I have a dodge challenger....I'm still picking up KA cops 2.5 miles away...100 ft up hill...offset...thought trees and houses...amazing...
I just got the Max2. I prefer to mount low. Will this hinder performance at all? 99.9% of the time K and Ka are the only bands used in my area. I believe I've seen laser once in 14 years.
Marginally but not a ton.
Is it a good idea to mount my radar low I drive a lifted jeep so my vehicle sits higher than a lot of windshields do you still recommend putting it higher in the windshield?
Mac Mitsch I almost always prefer higher. The fact that your jeep is lifted will only make it perform that much better. Being able to see clear over cars and hills will help performance.
awesome i just changed it and will be testing it over the next few weeks but thank you for the help
Vortex been using that redline i bought of my friend I segmented it like you did in your video and the range is amazing I have the sticky mount suction cup and the radar is mounted straight but the bumpers don't hit the windshield does that matter I drive a 01 Lexus rx300 and no matter where I mount it high or low the bumpers don't touch
+kyori79 That should be just fine. :)
Thanks bro
My redline isn't picking up k band radar co until I'm right on top of the source any thoughts
I bet you're pumped for the Radar Roy testing results!
Moreso RALETC's results
I prefer the blendmount mirror mount for my 2018 accord touring 2.0T. Windshield mounts are unreliable, especially in the so cal summers. My car frequently reaches temperatures of 140 degrees, and the suction cup mounts succumb to the heat frequently. Blendmount does make it a little more visible, but that thing is never coming down. Also, with the new ez mag mounts from escort, it's impossible to mount the radar detector above the mirror as you are doing here, because you have to bend the radar detector upwards to mount it on the magnet. Anyways, i'm late the party here, lol.
Do you have a tutorial for the high Mount? Want to buy my first radar detector but don't like any mounting positions but the one in this video
You mean how to hardwire it in?
Normal hardwire: czcams.com/video/aEr52utks2c/video.html
Mirrortap: czcams.com/video/9wARz531h4k/video.html
Vortex Radar thanks that's exactly what I was looking for . One more question , does the radar detector get in the way of the sun visor when Mounted up there (with normal hardwire)?
the way your v1 is mounted, are you still able to use your sun visor?
+larkybaby333 In that car no, I'm not. Luckily I live in Seattle. :p Compromises of having a little car, I suppose. :)
Great video dude, I have the original escort max which I noticed has stopped being produced, I think it works pretty well, is it worth upgrading to the newer max for better performance if the newer ones do,or am I good with what I have already? Thanks.
+deion762871 The performance of the newer ones will be the same so there's no reason to spend money just for that. If you want arrows or something sure, but performance is the same. :)
Thanks for your the advice, one more question cops around me use almost exclusively KA radar, how much better would you say the redline is compared to my max for long range radar detection, a lot better?
+deion762871 Oh much better, yeah. The filtering will be worse and there's no GPS, but the range will be better. The Redline has been discontinued though and Uniden has come out with detectors to offer range even better than the Redline. Check this out: czcams.com/video/FVfcRy6GY-s/video.html
What laser jams do you recommend? I’m in Alberta Canada and jammer is illegal here since it interferes, but I think it’s worth the risk if concealed
Alberta? ALP no question.
Hey great video: have a few questions;
Do you have any tips on how to get the suction cups to stay high on the windshield?
Do you think mounting it higher really makes a difference?
Do you first attach your mount and then the V1 or do you slide in your V1 into the windshield mount and then place it on the windshield?
Thanks a lot!
Ryker Bowen Mounting it higher does seem to make a bit of a difference.
When attaching the suction cups, don't put them on any black dots. Mount it straight on the glass. Wetting the cups can help them to stick too.
I usually mount the suction cups and V1 as one package, that way I know exactly where the V1 will be. Once it's sorta in position, I'll often remove the V1 and press the mount firmly to get the suction cups to hold.
TravelCam1111 Nice. Is their anything I can add to the suction cups to give them a stronger hold? I've heard people suggest RTV silicone? Any ideas?
Wet them. I use saliva. ;) They do flatten and lose their grip over time, but fresh new ones should work well.
What's that phone mount that you're using? I have a truck that currently has a carpeted dash cover, so I don't know that I'll be able to position my phone in the same place as you. I could probably mount the remote Concealed Display unit directly under the main instrument cluster bonnet, in line with the steering wheel. But it sounds like the Android phone/YaV1 app setup basically renders the remote display moot. I guess we need another video on where to mount our remote displays/cell phones!
+Steven Lewis There's a post on RDF of where people have creatively installed their CDs if you wanna search for it. Phone placement is VERY dependent upon the car you have and personal preferences. As for the phone mount I use currently, it's the RAM X-Grip mount. amzn.to/1PZ7Vqd
Loving your vids. Quick question. What brand of mount do you use for your phone? Thanks.
It's the RAM X-Grip Mount. amzn.to/1dwz7Pz :)
Video review: czcams.com/video/fXeYWZtiuoc/video.html
Hey man for full laser protection using ALP how much am i looking to spend after install. Best ballpark?
Em Es em Totally depends. Some places charge and arm and a leg, some are cheap. It could be a couple hundred bucks for a basic two head install, could be 4 digits for a full install plus custom parts to match interior displays and controls with your car.
Got it. What brand would you suggest for ALP?
Great Video! Do you think putting the radar by the top of the A pillar is a good place to keep the radar or usually putting it in the middle of the car is the best place? Im basically trying to hide the wire close to the A pillar.
Well most windshields curve and so if you mount it by the A-pillar, it'll be pointing off at an angle instead of straight ahead. That's the main reason why you typically want it by the RVM. It'll be straight that way.
I have a V1 Gen 2….So mounting it high is OK and the tint strip at the top of my windshield won’t affect performance?
czcams.com/video/Dd5YyLgyw5E/video.html
@@VortexRadar thanks …. Great channel
Hello, is it possible that the cop follows from behind with his radar off, then suddenly turns it on? So by the time my Valentine V1 catches the signal, he already gotten my speed.
You bet. No radar detector can detect what isn't there. He can also match your speed and then look at his speedometer. That's called pacing. It's why you need to keep your eyes peeled in general.
Will a windshield banner affect the performance if you have it mounted up high?
Can't say for sure, but it'll probably be fine.
No! Only laser.
If you have it at the top where do you have the long cable
johnny johnson Hardwire it.
If I were to hard wire my V1 how would I use the Bluetooth module seeing how the V1 would be plugged up to the fuse box and there would be no place for the Bluetooth to plug up. However, can just plug your original V1 power cord up and not use that to plug in the V1 but to just get that to power the Bluetooth module?
The V1's power connector actually has two plugs, one for the V1 and a second one for an accessory like a bluetooth module or concealed display.
+Vortex Radar so if I plugged that up in my console and plugged the Bluetooth module up and then ran my V1s real power supply to the fuse box it would still pick up the Bluetooth signal, correct?
+killz5250 see this video. I think it'll help: czcams.com/video/nfQmbh5C7PQ/video.html
What laser jammer do you have and where can i get one?
+Host Bert I use the AntiLaser Priority. Here's all the info you need about buying it and setting it up: www.vortexradar.com/2016/01/everything-you-need-to-know-to-set-up-and-use-your-antilaser-priority-laser-jammer-system/
Also what radar detector would you reccomend for me? I live in Southern California and do a loot of highway driving and also city driving in los angeles from time to time. I was leaning towards the beltronics sti, but was looking for a second opinion. My average speed on the highway is at least 80mph at a 65mph speed limit and usually go 50mp in the 30 zones in citys.
Hey Bert, so if you're in CA, especially in LA, you can shut off K band which means you don't need some of the false alert filtering that people would need elsewhere. That really simplifies things. For that reason, the V1 is great if you want arrows or the Redline if you want maximum performance. If you want a remote installed detector, the Net Radar, Radenso HD+, and STi-R Plus would all work well. Take a look here for more info: www.vortexradar.com/buy-a-radar-detector/
so if i was looking at the redline the sti-rplus is also a great choice since they perform about the same right? Thank you so mich for your detailed responses it really means a lot and awesome videos aswell! I currently have a cobra and it has way too many false signals and the ka range dosent seem too well.
Yeah they're actually the same platform in different packages. The Plus is like a remote Redline with GPS. There's some technical differences like a differently packaged low noise amplifier so the Redline may have a slight edge in performance, but really they're the same idea. Either one would treat you well.
Something else to consider.. The Redline is a beast when it comes to performance. If you want a remote version, you're lucky in CA that you don't need K band so you don't need all the filtering options that the Plus adds. What you could do is instead of buying a whole Plus (which retails for like $1300), get just the antenna head and the connector to plug it into your ALP's and for right around the same price, you'll get some laser jammers plus the radar detector. You'll lose some of the filtering options that the Plus offers you like automatic GPS lockouts, but since you'll be turning that feature off anyways, you'll get much more for your money by going that route. Just an idea. :)
Hey man, I'm in the UK so drive right hand drive but I own a V1 so if I mount it in the middle of the windscreen I cant really see the screen. Therefore I have it mounted top right of my windscreen, so I can see it. Do you think this affects my performance much? Great videos BTW.
Performance-wise, just make sure it's pointed straight forward and is level to the ground. That's the most important thing.
+Vortex Radar oh wow that was a quick response, thanks alot dude! Thanks for the V1 manual programming guide also, helped quiten down the V1 so much considering almost everything over here seems to emit K band.
Awesome, glad to hear it helped! 👍
What mounting solution would you recommend for alternating one detector between three different vehicles?
Try out one of those magnetic phone mounts. You can get either a suction cup (windshield) or adhesive (dash). They'll usually come with 2 or 3 different sized plates with 3M tape on one side, and the base has a strong magnet. The one I have isn't anything special but works great (Scosche 20 or 30 bucks). I have it mounted on my dash and it's very stable but easily moved/adjusted. Just pull it off the base.
@@patrickhdsnthat's an idea, thanks.
What are your opinions on the cobra Rad 480i as a first time radar detector will it save me from a ticket ?
I’m not a fan. Here’s some info on the topic, including that detector: czcams.com/video/Nez26cP0aMI/video.html
@ Vortex which is the best budget friendly radar detector..?
SIKKMAD3 People keep asking that very question and so it's the project that I'm currently working on. :) In the meantime, see these tests:
www.rdforum.org/showthread.php?t=42809
www.rdforum.org/showthread.php?t=44373
DFR series
I thought the manufacturers reccommends staying away from any tinting as it affects performance?
Tint can impede laser detection since it reduces light transmission, but the only issues for radar detection are shocked with metallic tint because that will significantly reduce radar detection capabilities. Non-metallic tints are just fine.
(please excuse my English. I'm french from Montreal). SInce I live in Quebec, the radar detector MUST be placed in the most hidden place. I'm thinking on buying the Radenso Pro SE wired directly into my car's electric system (if possible). QUESTION: Would it be a good idea to place the Radenso squeezed between the passanger seat and its headrest? (of course, when no one will be sitting on the passenger seat for the radar to work properly). This way, the radar detector would be almost invisible from the outside or from a policeman who comes to my window. Thanks.
+Mario V That could work, yeah. :) I've seen some people do just that.
Thank you
Maybe it would be a good idea for your next reviews to suggest this placement for people who uses a radar detector where it is illegal
Do you think that it would be any much less effective if I were to mount the radar detector to the right of the RVM (instead of left as you have it). Mounting the Radar Detector to the left blocks my view and I find it a little irritating as I am a newbie in this area and not used to something blocking my view. I would not think that it should be an issue, but wanted you to bless this approach before I took the plunge :)
+Dave P haha the right would be fine. The RVM would probably block your view of the RD, but it would perform fine.. Some detectors and cars are better for this, some not so much. It's ultimately up to you to decide which location works best for you. :)
+Vortex Radar Great! thanks a lot for the reply. In my case, I think it will not block the view of the detector so I think I am going to move my radar to the right of RVM. Thanks again. :)
Great info, thanks!
What about mounting on top of the guage cluster in front of you?
You won't get the same performance as you will if you mount it high, plus your WS will likely curve to the left so your RD will be pointing off at a funky angle and not aiming straight like it should be. ;)
Cool! i decided to try it out and since i drive a low car and i turned the RD to face flat it works about the same. since Utah HP only uses Ka im not too worried
What do you think about velcro mounting it to the dash?
I've never seen anyone do that before. Usually it's better to get it off the dash to clear the wipers and all.
My car (2001 camaro) is difficult to mount anything on the windshield so i was trying to figure out if my V1 will be badly compromised or not
islesrule123 Gotcha, yeah it looks pretty steeply raked. The V1's mount is pretty flexible so try it out first and see if it works for you. It probably would. You can also look into the Blendmount as another option.
I would like to mount mine high and run the cigarette lighter cable around the dash and window, but the cable is too short by over a foot.
+Anonymous User Use a hardwire cable instead. www.vortexradar.com/2016/02/radar-detector-hardwire-cable-options/
do you have a good solution for a Benz since there is no blendmount for them? I cannot suction cup mine due to full front tint.
+Dom Trillizio I've seen other permanent mounting options, custom fabricated ones. You can use 3m doublestick velcro or upgrade to a beefier suction cup if need be.
+Vortex I don't want to mount to the windshield because it would eventually hurt the tint. and the Max360 has buttons on the top so mounting needs special considerations. thanks, I found a solution but wanted to see if you had a better one.
My question is why did you tint your windshield?
I didn't... In fact it's the only window that's not tinted. Everything came this way when I bought the car. I like it. :)
+TheIamdevin it keeps the sun out and most of the heat in your car in the summer comes from the front windshield because it is the biggest one. So only tinting the side and back doesn't help keep all the heat out
@TravelCam1111: What kind of dashcam is it that you have? Does it work well at night?
Dariel Taveras I run an iTronics ITB-100HD front and rear. They were pretty good when I bought them a few years ago, but better ones have come out since. I'm not as familiar with the more recent options though.
TravelCam1111 Thanks! I've been looking into that dash cam. Do you have it set up where it will run when your car is off, or is it only functioning when the vehicle is on.
Dariel Taveras Correct. It's wired into a fuse that only provides power when the car is on.
TravelCam1111 Thanks!
About the Escort Redline, which I have in my vehicle. I currently have it placed in somewhat of a similar position as you do in this video. Do you really feel that it will perform better if it was placed right under the rear-view mirror?
Dariel Taveras Some tests have shown that higher is better, yes. Just make sure you route the cables neatly too. ;)
I just got a uniden but on my azera, it points up a lil. I can't level it.
Adjust the mount of your RD. It’s intended to be adjustable.
I have the big suction cup mount with the ball pivot. It won't go further back because it's backed up all the way to the plastic part of mount
The issue I find with the high windshield mount is that it stops you from using the sun visor as easily. A lot of times I flat out cannot see my detector anymore when the visor is down
Depending on your car, sure that can be an issue.
Where can i find a Valentine one at?
On their website only. Don't buy it from places like Amazon. www.valentine1.com/
I live in MN, so how do I mount it so I won't get a ticket? Or can I even?
It's impossible to ever be in a situation where you won't get a ticket. The goal is to help lean the odds in your favor as much as possible. There's no bulletproof solution.
Vortex Radar Could I Velcro it to the dash?
I live in California. The law says you cant place it on the windshield. Is there another good spot to place it??
Ah yeah, in that case you should get a Blendmount. You can hang it from your RVM so nothing is on the windshield, plus it looks very clean. bit.ly/1KvvFUr