2011-2023 Challenger SR Performance Sport Coil-Over Kit Review & Install

Improve the handling and stance of your 2011-2023 Dodge Challenger by upgrading to a SR Performance Sport Coil Over Kit. Featuring upgraded, heavy-duty mono tube shocks and coils, this Sport Kit will greatly improve your Challenger's cornering capabilities, while lowering its ride height for a more aggressive appearance.
Adjustable Ride Height. Not only will SR Performance Sport Coil Overs improve the handling of your 2011-2023 Challenger, but they will also improve its overall appearance. This SR Performance Sport Coil Over Kit is ride height adjustable allowing you to lower your Challenger anywhere from 1 inch to 4 inch (front and rear) to eliminate that nasty tire to fender gap for a more aggressive street stance.
36 Way Adjustable Damping. The SR Performance Sport Coil Over Kits use 36-way adjustable mono tube struts that have been specially tuned to match the included spring rates. The 36 clicks of damping adjustment allow the driver to dial in their preferred handling feel or desired ride quality from soft to firm to match their driving needs.
Bolt-on Design. SR Performance designed their Challenger Sport Coil-Over Kit to be an easy, bolt-on conversion. There is absolutely no cutting, welding or modifications required for a simple straight forward installation. Please note that a proper alignment is required after installation.
Application. This SR Performance Sport Coil Over Kit is designed to fit 2011-2023 Dodge Challenger models. muscle.am/45H2b0X
Intro - 0:00
Features - 0:31
Construction - 2:40
Price - 3:30
Install Difficulty - 4:02
Full Install - 4:32
Item CH16302
----------------------------------------------------------------
Follow AmericanMuscle for all the latest Challenger and Charger Content:
Subscribe for Daily Mopar Videos: muscle.am/2TXrfwf
Instagram: / americanmusclechallenger
FaceBook: / americanmusclechallenger
AmericanMuscle.com has the best aftermarket parts for your Dodge Challenger or Charger: muscle.am/2ztDN5R

[@AmericanMuscleDodge]

Shop These SR Performance Sport Coil-Over Kit ! ; muscle.am/45H2b0X

[@gt1564]

Note, you cant adjust the rear height while on the vehicle, the grooves in the lock ring arent deep enough for a spanner wrench to actually adjust it, youll have to remove the spring again to adjust the height off the car🙃

[@RANhxcCORE]

the front install part is missing :c

[@julienchardon9101]

Hello,
how the camber plate can adjust the camber?
shock are not mounted on the knuckle but on a arm that does nothing in camber

[@raptor_jdm]

Don't buy these for the challenger will not fit the 2015-2023 model

[@nchargeny]

would these work on 2019 challenger scatpak wide body? I have adaptive dampers

[@raptor_jdm]

No they don't fit. That's why the install portion was cut out. These guys are a fraud. Just tried this install myself and of course the sway bar end link doesn't connect because it's mounted on the side where the bolt goes into

[@zllabedelle]

@@raptor_jdm does it fit a 2023 sxt?

[@raptor_jdm]

@@zllabedelle I'm not sure about the sxt. If you send me a picture I'll be able to tell you. The SR coilovers have the sway bar end link mount on the wrong side, they might only be for the 14 and older models.