Testing a 8,100 rpm Lego Technic Vacuum Engine (instructions)
Vložit
- čas přidán 4. 11. 2023
- I hope you enjoyed the video!
The sound is crazy, right?!
For me it was a total surprise, that the two blade one was faster than the three blade one...
LEGO® is a trademark of the LEGO Group, which does not sponsor, authorize or endorse this video or the content herein. - Věda a technologie
The sound is crazy right?!
Which car does it sound like?
The Sound is mind-blowing!
It sounds like a Supra!😎🤘
Yeah, could be😅
the 4-paddle turbine sounds like a flat plane V8, like in a Ferrari or sumn
The first one sounds like an F1 car, probably from 2006-2013 with the v8s
Less turbine = more rotation/less force
More turbine = less rotation/more force
😱😁
Yeah, maybe in theory, but the four blades one is the biggest and the fastest...
Wich one is I deal
@@Diezellong-us7pf It seems like the four blade one...
Ok thanks
@@Diezellong-us7pf No problem👍
The four blade propeller sounds amazing
Yeah, like a f1 engine...
The more balanced the turbine, the higher the rpms in what I’m getting from this
The balance is important, but I think that the number of blades are even more important...
@@LucasDynamics It looked to me at least that the 3 blade one had a lot more leakage, so maybe some small bits of hot glue in the middle to seal it up? It sound really nice though and I love it!
@@Avetho Yeah, theoretically, but I wanted it to stay unmodified...
@@Avetho But good point...
TYSM IVE BEEN TRYING FOR AGES BUT THIS GAVE ME AN IDEA AND IT WORKS SO WELL
No problem bro, glad I could help you!
yo it sounds like a race v8
edit: love how it runs off an actual intake valve
Thanks man!
Deserves more views, very helpful.
Thanks man, hopefully it will get more attention...👍
-Fererereri or Lambargumbar?
-Fererereri!
-Fererereri or Bugatata?
-Bugatata!
Your Lego automation projects so fun and fascinating
Thank you!
Dang, the last one sounds like a Mazda 787B
Yeah, the sound is crazy!
@@LucasDynamics Ik this is a late reply, but can u make one that sounds like an F1 V10 engine pls? That would be brilliant!
@@bigsebby3799 I uploaded a new version… I think the sound is even better!
The sound of it gives me chills🥶
Yeah😅
I love how it sounds like a Ferrari😁
Yeah, I am currently filming the 2 version and the sound is even better!👌
Nice build!
Thanks 👍
That Sound is crazy,,, my vote is for a Superbike effects unit- lol ?
Yeah, what is a superbike effects unit? 😅
@@LucasDynamics Superbikes is just a generic term for Motorbike Racing,, The noise the bikes make are very similar to F-1 cars-
@Mindless_One Ok, that makes sense!
What a beautiful sound!!!
Thank you!
@@LucasDynamics Make nice shorts - YT will explode..!
@@mofalaufkultur46 Ok😅
What a genius! Hope you make more!
Thank you, that motivated me! Do you want to se more vacuum engine videos or generally videos like this one?
Yes
@@jennatyler903 I said this or this and your answer is "yes" 😏
Lol can u make a vid on how to make the 4 cycle engine
Like a tut
I built the same from your film, but with two blade beacuse i don't have that bricks for three or four and it's amazing!
Nice!
The sound is... 🤤I love it)
Same!😏
“It’s a turbine” who cares, this man made an engine with AIR AND PLASTIC
Amazing build, might use it for a project (with your approval)
It’s cool, but it’s not very difficult to do. There’s a ton and way more complicated vacuum powered lego stuff on youtube already, not to mention countless tutorials. Some videos even date back to more than a decade ago. This is cool and all, but sometimes I feel like the attention should be going to more original concepts instead (not saying this is bad, just saying that a lot of other videos should also get this sort of attention aswell)
@@xmysef4920 Yeah, there are of course many others... But why should they become more attention than my new version? The algorithm treats every video the same... And if mine is simply the better video, why shouldn't it get recommended?
@WarPress2023 Thank you! Of course you can use it, go ahead!
@@LucasDynamics Yes, this is a cool video and the algorithm picked it up. What I was saying though wasn’t really meant to be personal to anyone, it was mostly me just thinking out loud. However I am just wondering though, did you really come up with this design or this way of making a vacuum powered lego machine? As a person who has been making vacuum powered lego stuff for about 2 and a half years now, I feel like I have definitely come across many, *many* of the same type and even ones with tutorials who haven’t gotten this amount of attention. I am not mad at you or anything, I am just a bit skeptical.
@@xmysef4920 No, definitely not. I didn't came up with this design. There are already some videos with a similar design... But I was interested in these concepts and couldn't find a version that was that simple with instructions, so I simply made a video about my version. And I think it's because I put more work into it that the video works so well now👍
Hey where do u get the 60 fom in the 4 blade calculation?
You get more move meant if the they are placed in certain areas so the throttle goes at the bottom and the the intake is at the top both still at the ends but yeah you’ll get more rpm
Yeah, I thought on this already... Maybe I will upload a second video.
How do i make that gear reduction to test the rpm?
The two bladed sounded mean lol. Like a two stroke bike
Yeah😅
3:17 sounds like a ferrari
2:20 sounds like a mclaren
2:47 sounds like a propeller boat
Yeah, a boat with a lot of vibrations...
No it sounds like a Dodge hellcat@@LucasDynamics
@UNKNOWN_O666 Could be, I don't this dodge sounds...
very nice i just made one its very cool
Cool!
Whare to buy the lego
You can buy it everywhere...
The 2 blade sounds the best
Yeah, the sound is awesome!
I don't know why but this makes me think about reload animations
Yeah, if there were pictures on the blades, this could work...
Does it work under Load because I want to build that too and I want to hook up an lego v8 and see how fast it spins
You need to gear it down otherwise it won't work...
Wow cool
It sounds like a f1 car
Yeah, of course Verstappen's Redbull right? :)
Whats the power optimization?
Which Lego set parts did you use in your construction?
I really don't know, sorry...
I have a huge Lego collection were everything is basically mixed. So I don't know which parts are from witch set...
Can it be used to power something in Lego or is there not enough torque?
If it is geared down like I did in the video it definitely has some torque!
Any substitute for the Lego tire?
vacuum engine❌
pagani zonda v12✅
Yeah😅
How to get the 4 blade propeller
It's quite complicated, but I built it with four of these 4210659 parts. And then simply filling in the gaps...
Yes it worked
Cool, did you replicate it?
Thanks for the video I’ve always wondered how these things work
No problem bro!
im def going to make this
Cool, which turbine are you gonna use?
@@LucasDynamics I think I’m going to use the 2 blade one
@@indoorbros551 Yeah, it's the simplest one but even though pretty fast...
@@indoorbros551 And make sure you don't forget the Lego tyre on the vacuum engine!
@@LucasDynamics i made it works well i've tryed alot of the lego engines and none of them worked this is the first one that did thanks
You lnow where i cam get the lego parts
You could buy them on Bricklink
Well, if anyone tells me where should i get these technic parts, i will build this.
how do you make the 4 blade turbine?
It's quite complicated, but I built it with four of these 4210659 parts. And then simply filling in the gaps...
can you tell me part names pls, im new to this
so i made one of theese one time it was just a stud wide and i hooked it up to a air compressor at 130 psi and is went so fast the plastic melted with in seconds
Cool, that must have been a lot of rpm!
can anyone list the parts used to make this?
I do this and this is Crazy!
Cool!
Fourth one sounds like a person saying noom noom
What set is this???
There is no set I build it myself
wish i could build something like this, but i dont have the right parts.
You could try to build an even simpler version...
Gee your good big bro
The third one sounds like a car getting car washed
Is there any other peices i can use for the turbine?
Idk you can build it with many pieces. I chose these parts because they were laying around...
Is the vacuum supposed to blow or suck for it to work
It sucks the air through the whole thing...
Sucks
Didn’t know that Lego sells aftermarket parts 🗿
You mean that Lego doesn't sells vacuum engines...?
Best video you ever uploaded!
Glad you think so!
Makes Vroom Vroom Vroom noise
Exactly 💯
Niiiiiiiice 👍
Thaaaaanks👍
Have you tried twin turbines?
Not jet, but I will definitely try it...
Do you think it has potential?
At leat you sort of have a RX7 fd engine( 13B)
Yeah!
The information is bad: My finger got sucked off
Oh nooo, do you need a paramedic?
Making a lego engine close to a jet engines speed damn but how much power does it get?
When I geared it down it had a lot of torque...
@@LucasDynamics well done I would have expected from a vacuum to be quite weak but if you can make it have high torque I wonder if it could run a car (added a more powerful vacuum and more reinforced stuff plus possible even a couple more modules)
why does that sound like a rotary engine like why
The second one sounds like a car bvoom
I think F1 are made with legos and vacuum cleaners now...
Of course with a Dyson vacuum cleaner and a four blade fan...
I biulded it and it don’t work
How does that even work? Lego bricks aren't sealed and have little gaps that air could get out of
The gaps are quite small and the vacuum very strong...
Oh alright thanks dude
@@Gadatek No problem bro!
Turbine is not vacuum engine my mate.
It's a turbine that's powered by a "vacuum". So it's basically an engine powered by a "vacuum" = vacuum engine...👍
No, it’s a vacuum turbine.
@Sauci55on You also call the turbine of a plane a "plane engine"... But it's also just a turbine...
😏😏😏
@@LucasDynamics
Vacuum turbine, not vacuum engine, sorry 🙏. Engine need a piston.
brickbuilder when he gets bored:
No, I am not bored at all!😤
F1 turbine right?
Yeah, it sounds very similar...
Try a six blade!
I probably will try it, but in a bigger version...
Dunno sounds more like a supercharger
I don't know how a supercharger sounds, do you?
Im you subscriber😝
Thanks man!
Erm well actually ☝️🤓
What?
How to make two propeller
Where can I buy the pieces
@@CarsonStrother-zc8oo Bricklink
The first one sounds like a a dog say woof woof woof
Looks great. Very similar to the one I designed. I got 11k rpm with three blades. Have you seen the video or short I made?
I looked at your channel and yeah the system is quite similar... Yours is a bit more complex, mainly inside... But how did your short got a million views😲? That's impressive, congrats!👏
@@LucasDynamicsI would like to keep evolving it to see how far it can be pushed before it blows up.
And ya that was the first short I ever posted. It sat at a couple hundred views for about a month, then randomly took off🤷🏻♂️. It was pretty exciting!
@@owenvansanten Yeah, I am probably also gonna make a 2.0 version...
no oil????
That would probably add friction in this case, unless you use the oil used to service watches, anything else is too thick.
Yeah, I don't think that it would have helped a lot and I would have had to clean that up...
This is a turbine, not a engine. I Want a piston engine
It's a engine 😏
You can actually make a very nice piston engine using this mechanism, just don't lose your finger.
I builded it but the sound is difftent 😢😢😢😢
Maybe the problem is your vacuum cleaner...
@@LucasDynamics no, cleaner is very God
@@EnduroSul Dyson?😏
Like zx 10 r 😅
🤔What do you mean?
I can’t be the only one that thinks the four blade impeller sounds like a Mazda 787B
No, you aren't!
Could you make a part list 🙏
You don't need a part list. It hasn't many pieces...
sound like a rx7 and reminds me of an rx7.
vacuum engines system is very easy !
Yeah, it is...
Why is ir sound like supra?💀💀
💀Idk
That ain’t a vacuum son that’s a steam engine whistle
Nah, that ain't a steam whistle...
That's an engine powered by Underpressure.
You go way to fast I can’t see some of the parts, nice vid tho
If I go slower it will get boring...
What does the Dog say ?
"Wuff" of course
Where did you go, where is the video?
I think I will upload now every month... So the video comes next week 👍
Tiếng của xe mô tô 🏍️
lego consuming machine made of lego
🤔Is it consuming Lego?
@@LucasDynamics y e s
@@eggdogreal How?🤔
,😊😊😊😊😊😊😊😊😊😊😊😊
😊😊😊
That is a carburator
This isn't in any way a vacuum engine, and it's ignorant to call it as such. You wouldn't call a wind turbine a wind engine would you? An engine is what's creating the power, not what's being driven by it. It's like calling a driveshaft a car's engine since it's being spun by the engine, and delivering power to the wheels.
We already discussed topic in the comment-section under the comment from "yuvuallegomotorized" 👍
this isnt a vaccume engine this is a turbine
We already discussed topic in the comment-section under the comment from "yuvuallegomotorized" 👍
Name Lego??
What? 🤔
At least mine is faster than this...
How fast is it?
10 grand and I was all disappointed that I didnt break the record... but I just built a way faster one today
@@Dudeface167 👍
It is fun but it can brake the vacuum cleaner dont try it
It can brake the vacuum cleaner?😂
How, with it's extraordinary sound?😅
I tried it and the vacuum cleaner started puffing and whistling
@jovanpopovski8445 😂 This is a problem with your vacuum cleaner and isn't caused by the vacuum engine...
its a turbine not an engine
It's a engine...😏
This is amazing🎉! I build this engine at home. Sound of my turbine like dodge charger!I put this engine on my channel avatar! Thank you! @LucasDynamics
Thank you!