Haha yes please, this switching on and off 3-6 times and I get no repair mode, Apparently booting from network is best next option but when I check my boot options (I am connected to the internet) don't get a boot from network option
What is this "safe mode" sorcery of which you speak? Is safe mode better for me because of it being "safer" or should I keep using Windows mode? Also, does this remove McAfee virus?
Recently my pc started a windows update that was stuck on 0% forever. It finally skipped to “restarting” with the buffer wheel. It stayed like that indefinitely. I unplugged the Ethernet and did a hard reset. Now when I boot up the pc I am stuck on a black screen. I’m unable to access safemode to fix Anything. Just stuck on black screen
You might need to get a Windows installer to get to the troubleshooting menus you need. Here's how: 2 USB boot drives EVERY PC user should make before it's too late! czcams.com/video/uCkOVDHfFJM/video.html
Whenever I try one of the methods to access Safe Mode the options menu to choose one of the startup options after restarting never appears and I'm not sure as to why.
My Windows 10 Pro does not show “Startup Settings” under Advanced options. It has System Restore, System Image Recovery, Startup repair, Command Prompt and UEFI Firmware settings.
Could be because it's the Pro version, but I don't think so. I would try a Windows installer disc and see if you get the same results. Here's how to create one: [2024 MEGA update!] 2 USB boot drives EVERY Windows user should make before it's too late! czcams.com/video/pi3haU6h1es/video.html
@@AskYourComputerGuy Found that by restarting my machine while holding the SHIFT+Power Key when it restarted it went into the Troubleshooting mode and the Startup Settings magically appeared. Was able to get into Safe Mode->Command Prompt and run “sfc /scannow” to fix corrupt system files and now I am back into my machine. (It was freezing at the Welcome screen) Will follow your lead and create the 2 USB drives. Thanks for your prompt reply!
Hi i am having lenovo yoga slim 7i , i am unable to acess safe mode through pressing button 3 times but i am able to acess nova button , can you ease help how to acess safe mode through bios
Can't access through BIOS. You have to just turn your PC on and power it off immediately anywhere from 5-6 times. Eventually you'll get your troubleshooting menus where you can force it to boot into safe mode 👍
Hello Sir, thx for the videos and help! I just upgraded to Windows 10 from 7 and had some issues with updating and blue screen crashing from KMODE EXCEPTION NOT HANDLED ,figured that out. Now for some reason, the BIOS menu loads upon restarting but will not load and let me in. Can't spam f2 or del it just laughs back at me,lol. I dropped it off at the PC store locally and I stopped by today after they called me to say my pc was ready, when I get there he goes to show me how it is working fine now and it freezes on that bios logo for him too, hehe. Arghhh. I'll check again tomorrow to see if they figured it out. Thing is, I can't afford 55 dollars an hour to have them hand me a crazy bill that makes me wish I'd just bought a new computer! So I'm asking here, you seem pretty cool so I figured I'd try, Thx for Anybody's reply/help!!! Thank YOU
Turns out it was an issue with the Windows 10 installation. Had to re-install it. For some reason my pc won't hibernate any longer. But...if thats all thats wrong at the end of the day I'm fine. Having my custom micro pc that I built running great and with a new OS feels great. I got 13 years out of it before this upgrade, hope to get a bunch more out of it! Asus micro atx motherboard, I5 2500 cpu, 16 gigs of ram, 4 tb storage, Lian-Li Micro Case. Been a pretty epic build for a lonnng time now 🤘😉 and it still looks soooo 😎
My laptop goes to a grey screen on boot, and even after i select option 5. It does not boot into safe mode, it just goes to that grey screen again. I have tried many fixes. Nothing works.
Hi, i still have the issue. when i start my pc it shows the motherboards brand and below it the Preparing automatic repair. The issue is that the little dots do not make a full circle before it shuts down by itself. I have tried placing another ssd from an old laptop but it still did the same thing. Have you ever encountered this?
Could be anything, but sounds like hardware if you swapped the drive. That eliminates Windows. I'd start with removing memory sticks, as we as unplugging anything that isn't critical to use (extra drives, DVD drive, etc). Minimize the boot to motherboard, CPU, one stick of RAM. Even pull your GPU if you have one, that can cause issues as well
@@AskYourComputerGuy hi thank you for your response. So i tried doing all that but it still would not work. i even tried cold resetting the bios by both removing the cmos and connecting the 2 pins, but now i see another issue. it still has the same issue but on the second load it get's stuck on a blue screen. Also i used my ssd from a new laptop and it still didn't want to work so i assumed it must be the motherboard, but i am not so sure about it
@@AskYourComputerGuy I am grateful for your response. I have recently contacted a friend to notify me when someone is willing to donate a motherboard. I will try it out and see if it works
You probably need to use a Windows installer disc to access the menus if your system is that damaged. Here's how: [2024 MEGA update!] 2 USB boot drives EVERY Windows user should make before it's too late! czcams.com/video/pi3haU6h1es/video.html
Yes it's super easy to use. If you still can't figure it out I'll make a video about it. It's one of my favorite programs I've used over the years and it actually really helps
I have the same problem -- no 'start settings' -- but cannot get the system to start a self repair by powering off/on 3 times -- or more. Here is the problem I have:
The scenario: Ran CCleaner a few days ago and had it update 6 drivers. After that -- when requested to restart -- I did --- and now I can no longer boot.
CCleaner does not respond to support requests.
My machine: i5/3600 RX 1030 with 32 GB Ram--- simple office/email machine. Drive A is a 2 TB HD ---- Drive B is a 2 TB SSD. I have only been using the SSD drive
I have a win 10 flash drive -- used it to boot to the "repair" screen -- went to CMD -- and tried the editbcd string to try to get into safemode. It failed stating that 'the boot configuration store could not be opened'. Tried this on both drives.
also tried to do a restore image -- with rstrui.exe --- and that also failed.
![Fix Windows 10 start-up - Blackscreen, Bootloop, Infinite Loading [2024]](/img/n.gif)
Can someone tell me why my pc wont enter safe mode even if i turn it off and ond 3 times like you sir did? Tnx for help, cheers!
Haha yes please, this switching on and off 3-6 times and I get no repair mode,
Apparently booting from network is best next option but when I check my boot options (I am connected to the internet) don't get a boot from network option
What is this "safe mode" sorcery of which you speak? Is safe mode better for me because of it being "safer" or should I keep using Windows mode? Also, does this remove McAfee virus?
I'm laughing because I know you're not seriously asking me that, Nico ;)
#3 Did the trick ! Thank You.
You're welcome!
Thanks brother, saved my new build that wouldn’t boot to windows❤😂
You're welcome!
Recently my pc started a windows update that was stuck on 0% forever. It finally skipped to “restarting” with the buffer wheel. It stayed like that indefinitely. I unplugged the Ethernet and did a hard reset. Now when I boot up the pc I am stuck on a black screen. I’m unable to access safemode to fix Anything. Just stuck on black screen
You might need to get a Windows installer to get to the troubleshooting menus you need. Here's how:
2 USB boot drives EVERY PC user should make before it's too late!
czcams.com/video/uCkOVDHfFJM/video.html
I noticed something werid in my external hard drive and idk what it is, can i share a screenshot through email to you? im kind of concenrd
Email it to AskYourComputerGuy (at) Gmail (dot) com
Whenever I try one of the methods to access Safe Mode the options menu to choose one of the startup options after restarting never appears and I'm not sure as to why.
I've seen that as well. Not every method will always work, depends on the level of Windows damage
My Windows 10 Pro does not show “Startup Settings” under Advanced options. It has System Restore, System Image Recovery, Startup repair, Command Prompt and UEFI Firmware settings.
Could be because it's the Pro version, but I don't think so. I would try a Windows installer disc and see if you get the same results. Here's how to create one:
[2024 MEGA update!] 2 USB boot drives EVERY Windows user should make before it's too late!
czcams.com/video/pi3haU6h1es/video.html
@@AskYourComputerGuy Found that by restarting my machine while holding the SHIFT+Power Key when it restarted it went into the Troubleshooting mode and the Startup Settings magically appeared. Was able to get into Safe Mode->Command Prompt and run “sfc /scannow” to fix corrupt system files and now I am back into my machine. (It was freezing at the Welcome screen) Will follow your lead and create the 2 USB drives. Thanks for your prompt reply!
@RiXube good deal!
Hi i am having lenovo yoga slim 7i , i am unable to acess safe mode through pressing button 3 times but i am able to acess nova button , can you ease help how to acess safe mode through bios
Can't access through BIOS. You have to just turn your PC on and power it off immediately anywhere from 5-6 times. Eventually you'll get your troubleshooting menus where you can force it to boot into safe mode 👍
Hello Sir, thx for the videos and help! I just upgraded to Windows 10 from 7 and had some issues with updating and blue screen crashing from KMODE EXCEPTION NOT HANDLED ,figured that out. Now for some reason, the BIOS menu loads upon restarting but will not load and let me in. Can't spam f2 or del it just laughs back at me,lol. I dropped it off at the PC store locally and I stopped by today after they called me to say my pc was ready, when I get there he goes to show me how it is working fine now and it freezes on that bios logo for him too, hehe. Arghhh. I'll check again tomorrow to see if they figured it out. Thing is, I can't afford 55 dollars an hour to have them hand me a crazy bill that makes me wish I'd just bought a new computer! So I'm asking here, you seem pretty cool so I figured I'd try, Thx for Anybody's reply/help!!! Thank YOU
Turns out it was an issue with the Windows 10 installation. Had to re-install it. For some reason my pc won't hibernate any longer. But...if thats all thats wrong at the end of the day I'm fine. Having my custom micro pc that I built running great and with a new OS feels great. I got 13 years out of it before this upgrade, hope to get a bunch more out of it! Asus micro atx motherboard, I5 2500 cpu, 16 gigs of ram, 4 tb storage, Lian-Li Micro Case. Been a pretty epic build for a lonnng time now 🤘😉 and it still looks soooo 😎
@NIGHTROCKER70 good deal!
My laptop screen froze at the auto repair screen
mine too
You are a life saver❤
Thank you! Glad I could help 💪
is it possible to copy a game on steam from one of my drives and put it onto my other drive?
Don't think so. Steam games are downloaded on the PC. Maybe? I don't know
Try it and see!
@@AskYourComputerGuy it worked, i did it becuase a mod wouldnt install on my drive evreything worked, including the mod
Sweet!
Shift restart should of came first
When ever im ever out if printer ink and need to print something i feel like that guy from the movie office space
LOL get into IT... you'll feel like that whole movie every day 😂
thanks
My laptop goes to a grey screen on boot, and even after i select option 5. It does not boot into safe mode, it just goes to that grey screen again. I have tried many fixes. Nothing works.
In that case, you might need to reinstall Windows. Could be corrupted so bad that safe mode won't even load
@@AskYourComputerGuy That would require deletion of my installed software.
None of these worked for me even when i keep cutting off my pc and turning it back off somebody please me
I am getting bsod dies to falcon update but I am bot able to get into safe mode, can you please help me
What point are you getting to before not getting into safe mode?
Hi, i still have the issue. when i start my pc it shows the motherboards brand and below it the Preparing automatic repair. The issue is that the little dots do not make a full circle before it shuts down by itself. I have tried placing another ssd from an old laptop but it still did the same thing. Have you ever encountered this?
Could be anything, but sounds like hardware if you swapped the drive. That eliminates Windows. I'd start with removing memory sticks, as we as unplugging anything that isn't critical to use (extra drives, DVD drive, etc). Minimize the boot to motherboard, CPU, one stick of RAM. Even pull your GPU if you have one, that can cause issues as well
@@AskYourComputerGuy hi thank you for your response. So i tried doing all that but it still would not work. i even tried cold resetting the bios by both removing the cmos and connecting the 2 pins, but now i see another issue. it still has the same issue but on the second load it get's stuck on a blue screen.
Also i used my ssd from a new laptop and it still didn't want to work so i assumed it must be the motherboard, but i am not so sure about it
@yumihikokitsuragi1377 that's what it's starting to sound like to me, friend
@@AskYourComputerGuy I am grateful for your response. I have recently contacted a friend to notify me when someone is willing to donate a motherboard. I will try it out and see if it works
Unable to get in to 4 or 5 safe mode but 6 will
Omg BROOOOO you the man
I dont know why i cant even use 1 of those 10….
@huuduybaotruong531 usually that's because Windows is too far damaged to repair and just needs to be reinstalled 🥲
Cannot get into safe mode, BSOD screen reappears with stop code: bad system config info
Just had that exact BSOD the other day. Took a lot of sfc and chkdsk and DISM repair but eventually it worked without reinstalling Windows
Brigitte automatic repair wont even open please help guyz
You probably need to use a Windows installer disc to access the menus if your system is that damaged. Here's how:
[2024 MEGA update!] 2 USB boot drives EVERY Windows user should make before it's too late!
czcams.com/video/pi3haU6h1es/video.html
I’m having trouble booting my computer. I don’t even get to the blue screen. Nothing happens.
I would start here:
How to fix ANY Windows problem with the built-in repair tool
czcams.com/video/i-QHtJGAXgI/video.html
Critcal process died stop code every cmd command doesnt work what shpuld i do bro ? Wont let me boot into safe mode
Gotta just reinstall windows sadly
Or u can do a restore point and reset windows back to its old state 90 percent of the time it don’t work
Can't hurt to try. But if that doesn't work, a Windows reinstall is likely the only solution
@AskYourComputerGuy thanks bro so yeah I finally got ahold of another pc to download windows 10 again worked thank God
@Xotiic5266 yeah my restore points wouldn't work either new windows usb download worked
my computer tells me me i have 60 gb of used space and idk what is taking up space wht do you recomend
Download WinDirStat free. You're welcome :)
@@AskYourComputerGuy how do i use it is it ez to use?
Yes it's super easy to use. If you still can't figure it out I'll make a video about it. It's one of my favorite programs I've used over the years and it actually really helps
@@AskYourComputerGuy hold up it downloaded winzip is that the same thing?
@@AskYourComputerGuy it says i need to pay
I dont have the start up settings why ?
Start your machine and shut down as soon as the Windows load circle appears. Rinse and repeat until the troubleshooting menu appears
I have the same problem -- no 'start settings' -- but cannot get the system to start a self repair by powering off/on 3 times -- or more. Here is the problem I have:
The scenario: Ran CCleaner a few days ago and had it update 6 drivers. After that -- when requested to restart -- I did --- and now I can no longer boot.
CCleaner does not respond to support requests.
My machine: i5/3600 RX 1030 with 32 GB Ram--- simple office/email machine.
Drive A is a 2 TB HD ---- Drive B is a 2 TB SSD. I have only been using the SSD drive
I have a win 10 flash drive -- used it to boot to the "repair" screen -- went to CMD -- and tried the editbcd string to try to get into safemode. It failed stating that 'the boot configuration store could not be opened'. Tried this on both drives.
also tried to do a restore image -- with rstrui.exe --- and that also failed.
Not sure what to do next ---- any suggestions ?
Thanks in advance for any help !
Not always available, depending on how you get to the menu. Just skip that choice and proceed to the next option
@@AskYourComputerGuy ?? What is the next option ?
@danielkolody6505 it's been a while, but whatever is next described in the video - usually will be the next logical step 👍
My laptop won’t even go to the logo screen.
Try pulling RAM sticks one at a time