AM2 pre assessment manual
Vložit
- čas přidán 12. 12. 2020
- In this video, I talk through the AM2 and AM2S pre-assessment manual, which you can download from the NET website.
This is the first video in a series of five video’s covering the endpoint assessment, which covers Section A1 - Safe Working Practices.
Your maximum time allowed is 45 mins, and you will be allowed a minimum of 10 mins to read this section of the candidate assessment manual to prepare for assessment.
This section covers:
Safe isolation procedure: which will be carried on your TP&N board, as you would in the real world, before you install anything.
And
Risk assessment: you will be asked to fill out a simple risk assessment for the hazards present in the AM2/S along with an estimation of risk. In other words, the likelihood of the hazard hurting someone.
I then discuss the COMMON ERRORS section, and talk you through the mistakes that people make whilst completing this.
In my next video, I talk through the Section A, The composite installation.
This is some of the best training material I have come across on CZcams! Not only informative but some of the practical tips you give are invaluable - Excellent!!!
Thank you Steve 🤗🤝
I have my assessment next Tuesday and this is my first video, can't wait to watch it all!
Good luck 🤞
Well done Adrian, fantastic effort,
Helping to get our apprentices through the AM2 and a refresher for the rest of us 👍
Thank you 🙏
Super informative and helpful videos, as my am2 exam is coming very soon. Probably best preparation you can find on youtube! Highly recommended to all learners and for people who are working already, to be sure they doing it in right way. All the best of luck Adrian!
Thank you for this video it's very helpful
You are very welcome 🤝
Thanks Adrian, Brent.
You are welcome 🤗
Thank you very much adrian
You are welcome
Good information.
Thank you 🙏
Great stuff,straight to the point ,looking forward to going through this playlist:) as for revision books for the exam which ones shouldi be looking to get? Cheers
GN3, BS7671, OSG 👌
@@Pure_electrical_training ill have a look at getting gn3 , can't face going through bs7671 again just yet not long passed 18th😂
Hi Adrian and reader,
I took my first Am2s assessment a couple of months ago, and I have my resit in 5 weeks time (July 12-14) I feel I am a competent and energetic apprentice electrician and I did put weeks of effort into revising my first time around, but I failed most of the assessment. I am now quite nervous for my resit and feel quite lost on how to revise and prepare, no feedback at all was given and I would really appreciate some advice or guidance from yourself Adrian or from anyone who reads this.
Adrian, thank you so much for what you have already posted on CZcams, I have only just found your videos and will make my way through, but, referring to what I mentioned above, I do want to over-prepare if possible for my resit, and so further advice from everyone would be massively appreciated.
Sincerely - Tony
Email me and we can talk adrianepdavey@gmail.com
Hi mate just wondering which books it is that you advise reading? Thanks very much
Was there anything in particular, as there are a few books
Hi Adrian, is the plastic conduit bending video available anywhere?
Apologies Josh, I have not had a chance to make one yet.
Hi Adrian, I have my am2 booked for Monday, however my refresher has been cancelled that was supposed to be this Thursday, is the refresher essential and should I reschedule or should I just go ahead with the am2
How confident are you?
When you completed your pre assessment check, did you tick competent for everything, or were there things that you weren’t great at?
@@Pure_electrical_training I feel pretty confident, I’ve been doing the job for 5 years, and I’ve watched most of almost all of your videos and the things I’ve learnt mostly match the way you teach it, there are a few exceptions however thanks to your videos I will tweak my practice
Hi Adrian, where is the training on the risk assessment that you mention in the video and the video description?
Apologies, I’ve just read the video description and cannot see what you are referring too.
Do you mean the AM2-pre-assessment manual?
Hi mate it seems the video doesn’t match the title or the video description. The video is talking about pre assessment not section A1
Fair comment, I’ll get this changed
I can't find a risk assessment example, I am confused with the results section and my assessment is tomorrow are all them adequately controlled?
You’ll probably find that the risk assessment is written on the wall. Have you written a risk assessment at college?
A long time ago I know how to do them it was just the result section at the end it is either T trivial risk or A adequately controlled but a few others who recently did it wasn't in theres and in my refresher booklet it states this results section is very important
Hopefully this isn't an issue tomorrow out of all the things to worry about an I am worrying about this 🤣
How do I contact you?
What would you like to know?
.
The feedback is absolutely terrible if you fail on the fault finding it’s a straight fail zero feedback at all
I agree, people need feedback to learn and grow.
What NET are worried about, is people using that information to develop ways to cheat the test and passing it round.
They all ready have an issue with people spreading the assessment material