Toyota GR Corolla Brake Cooling Kit Installation

Follow along as Tom installs our Full Brake Cooling Kit on this GR Corolla. The Verus Engineering Full Brake Cooling Kit was designed for owners looking to maximize their brake's cooling efficiency and increase their brake's ability to do their job.
-----
Full Brake Cooling Kit: www.verus-engineering.com/sho...
-----
Facebook: / verusengineering
Instagram: verusengine...
Twitter: / _verus_
-----
Music Credit:
Cold Funk by Kevin MacLeod | incompetech.com/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY 3.0
creativecommons.org/licenses/...
-----
Chapters:
0:00 Intro
0:11 Tools Required
0:30 Kit Components
0:58 Caliper and Rotor Removal
2:16 Axel Nut Removal
3:13 Hub and Backing Plate Removal
5:10 Verus Backing Plate Install
6:50 Hub, Axle Nut, Rotor, and Caliper Reinstall
8:33 Inlet Duct Install
10:18 Undertray Trimming
10:54 Passenger Side Hose Routing
11:42 Driver Side Hose Routing
12:46 Hose Clamp Install
13:46 Outro

[@AleizoRZ]

Anyone doing this, for the bumper ducts I highly recommend just unbolting and unclicking the front bumper and moving out slightly just to get better access to inserting the screw for the duct. Makes install so much easier

[@Ilikefrenchtoast]

Even if you manage to get the screw out to mount the duct without moving the front bumper, its not really possible to get the screw back in, after putting the duct in place with the bumper in place. At least partially removing the bumper cover is basically required for this install.

[@user-fq8pl6ek8l]

What Editions is this for? I know the ME has these built in, but I'm not sure about the rest of the editions.

[@VerusEngineering]

All GR Corolla models. We were not aware the Morizo had a factory brake cooling kit. All models have through ducts in the bumper to the wheel well, but they are not used for brake cooling.

[@redsiput44]

Possible produce for vw golf 8 gti&R?

[@VerusEngineering]

Very doubtful. This kit is very specific to the Gr Corolla.