This might be the best DIY video on CZcams. I could see the enthusiasm leave your body as it progressed. 😂 Loved the ending. I actually stood outside like an idiot for an hour waiting for a breeze for the money shot in my video. 🤔 I gotta say your first mistake was not digging a new hole a foot over though. 😁
I will have you know that that leaf blower is actually unfurling the flag. We couldn’t get it to move because there wasn’t a breeze to be found and then my son came back with a leaf blower. 😂😂😂
I will also confirm that my enthusiasm dwindled rapidly as I thought to get the hole in the existing concrete. I think the official point when I was over it was when the hammer drill got stuck. 🤦♂️
I like that sand trick! I ended buying a sleeve from Amazon that shipped from China. It was a perfect fit! If I knew about the sand, I would have just bought a PVC pipe from Home Depot!
@ 13:00 minutes I thought you were going to loose your mind. I can feel your frustration at this point. If it were me, I would have just dug up all the concrete and lifted it out of the hole. It beats pounding concrete every time for me. Most likely it was about 18" by 20" deep. maybe 150-200 lbs. Welcome to FLA.
Why didn’t you just install a new flagpole base a few feet away and decommission the old one by cutting the pipe off and putting a layer of dirt over it? A lot less work. Hope that helps others.
I install Flag poles for a living on Long Island. This video was hilarious. I was alughing the entire time. Especially the removal of the old concrete! haha
I really enjoyed this video . With the great help you had , good to see your sons helping you . I've got 3 helpers me, myself , & I . Would like to see a fence project with all the family helping lol.
Why not just used a few boards and a short chain and jack to jack it out of ground pipe concrete and all in one we take fence post out all time within 10 min by doing that but it’s all good😊
Putting a regular flag pole, digging a hole, stone in the bottom, about 20" or so deep. My question is: I see many that put the dry concrete in the hole and then water it over a period of time. Is that the way to go or should I get involved with mixing the cement? Is either way ok?
This happened to me years ago except in a different way. I ended up having to dig all around the concrete and I eventually had enough room around the sides of it that I could wrap my 15,000 lb limit tow rope around it and tie a knot and I slowly pulled it out of the hole with my truck and then I dragged to my back yard and it's been there ever since.
I have a flagpole too and it’s very very tall and it’s very strong to it’s not a telescoping flagpole it didn’t come with pieces though the flag pole I had it for sale like about two years and I still have it flying beautifully
if you were putting in a 3 inch pole and it looks like a 2 inch in the ground, you should have bought a 2 inch adapter so the 3 inch would fit in a 2 inch sleeve.
Hilarious and educational, will be trying to install a flagpole myself in a couple of weeks, loved the tip about using child labor, I have a couple of minions myself running around the house somewhere, time to put their energy to use. 😃
I'll tell you a secret next time.Try stone wedges and shims after you drill a few holes around like you did. they work great cheap old tech but every useful. I would of just used a core Drill with a hydraulic stand but hey that's just me. Love your videos very entertaining LOL
How about a CRAZY idea, just put the pole NEXT TO where the old one was, is two feet in any given direction around it really going to make a difference? Just cut off that old pvc with a sawzall and bury it and put new grass old one gone!
You are in Florida, but not south Florida. If you were here the coral rock would be waiting for you. Imagine that concrete slab but 30 feet deep or more. Where is your skid steer?
Hey there from down under, I loved watching you trying to get the pvc out, while 1 of ya boys scratching his nuts, & the other 1 watching you struggling, frigging hilarious , The end result bonus laughs watching ya son hold a blower to make the flags move, lmao classic, I think you & HAXMAN should DIY tubing together, because you both are frigging funny.. Peace & Harmony from South Australia Adelaide.. :)
The ultimate Father / Minion bonding experience…. What better way to teach persistence and patriotism than to spend the day putting ONE hole in the ground to raise the flag??? Not gonna offer any advice except to suggest…. For the next bonding…. Find a job where the minions can show you how it is done…. While you spectate!
My question is if you were planning on digging a hole anyway, why didn't you just move over several feet and dig your new hole. Seems to me you were just wanting to make a comedic video promoting Haxman.
Listen, I could've moved over and kept digging--but I'm stubborn like that. I hate not accomplishing what I set out to do--I'm not saying that's the best trait in the world, but it's how I see the world. You're absolutely right--moving over would've saved us quite a bit of work. 🙄😁
After getting the drill backed out, I would have moved to another location and used your plan A....While the old owner is laughing his sides off... Lets hope you're a better business thinker than a DIY'er or it's doomed... Don't do what he did, work smarter not harder...
This might be the best DIY video on CZcams. I could see the enthusiasm leave your body as it progressed. 😂 Loved the ending. I actually stood outside like an idiot for an hour waiting for a breeze for the money shot in my video. 🤔 I gotta say your first mistake was not digging a new hole a foot over though. 😁
P.S. That’s the most handsome thumbnail you’ve ever done.
I will have you know that that leaf blower is actually unfurling the flag. We couldn’t get it to move because there wasn’t a breeze to be found and then my son came back with a leaf blower. 😂😂😂
@@SWiFence Brilliant 😁
I will also confirm that my enthusiasm dwindled rapidly as I thought to get the hole in the existing concrete. I think the official point when I was over it was when the hammer drill got stuck. 🤦♂️
@Haxman Do you have a light on your flagpole?
You’re a better man than me. I would have moved my circle 4ft over and installed. Covered up old circle and seed. 😂😂. Good job!
You should've been there! Could've saved me all that time! 🤣
@@SWiFence I know right!😂😂. Hey I’ve done that crap before too man. At the end it looks good and you’re representing America 🇺🇸
Literally how every project seems to unfold. This is your quintessential DIY video😂👍
Wasn't supposed to be, but... yeah... 🙄😂
I feel like I was watching myself minus the colorful metaphors. Damn good job!
This was the readers digest version of every project I’ve ever tackled. Fun video! Keep up the great work!
I like that sand trick! I ended buying a sleeve from Amazon that shipped from China. It was a perfect fit! If I knew about the sand, I would have just bought a PVC pipe from Home Depot!
@ 13:00 minutes I thought you were going to loose your mind. I can feel your frustration at this point. If it were me, I would have just dug up all the concrete and lifted it out of the hole. It beats pounding concrete every time for me. Most likely it was about 18" by 20" deep. maybe 150-200 lbs. Welcome to FLA.
Why didn’t you just install a new flagpole base a few feet away and decommission the old one by cutting the pipe off and putting a layer of dirt over it? A lot less work. Hope that helps others.
Because... because... hmmmmmm. 🤣 You make a great point--I'm just stubborn once I start on something.
I install Flag poles for a living on Long Island. This video was hilarious. I was alughing the entire time. Especially the removal of the old concrete! haha
Wow....I'm not the only one that has those kind of days......I'm gonna have to show this to my wife!! 😂
Glad I could encourage. 🤣
I really enjoyed this video . With the great help you had , good to see your sons helping you . I've got 3 helpers me, myself , & I . Would like to see a fence project with all the family helping lol.
I had the very same problem two years ago. My tool of choice (bad choice) was a shovel. It wasn't fun but it worked.
Why not just used a few boards and a short chain and jack to jack it out of ground pipe concrete and all in one we take fence post out all time within 10 min by doing that but it’s all good😊
There's a number of different things I'd try in hindsight. 😏
Putting a regular flag pole, digging a hole, stone in the bottom, about 20" or so deep. My question is: I see many that put the dry concrete in the hole and then water it over a period of time. Is that the way to go or should I get involved with mixing the cement? Is either way ok?
This happened to me years ago except in a different way. I ended up having to dig all around the concrete and I eventually had enough room around the sides of it that I could wrap my 15,000 lb limit tow rope around it and tie a knot and I slowly pulled it out of the hole with my truck and then I dragged to my back yard and it's been there ever since.
There you go!
I have a flagpole too and it’s very very tall and it’s very strong to it’s not a telescoping flagpole it didn’t come with pieces though the flag pole I had it for sale like about two years and I still have it flying beautifully
if you were putting in a 3 inch pole and it looks like a 2 inch in the ground, you should have bought a 2 inch adapter so the 3 inch would fit in a 2 inch sleeve.
Hilarious and educational, will be trying to install a flagpole myself in a couple of weeks, loved the tip about using child labor, I have a couple of minions myself running around the house somewhere, time to put their energy to use. 😃
I truly identify with this DYI. Hammer drills can be your friend. We will see the entire tool box out there if the sun doesn’t set first. Liked.
The house and neighborhood looks great 👍
Any no dig options you would recommend for a flag pole?
Since the bottom didn't fit you could have just turned the flagpole upside down and concrete the top into the plexiglass and then mount the flag.
Funny stuff. Talk about a how-not-to video 😂
I'll tell you a secret next time.Try stone wedges and shims after you drill a few holes around like you did. they work great cheap old tech but every useful. I would of just used a core Drill with a hydraulic stand but hey that's just me. Love your videos very entertaining LOL
Like your video
Thanks!
I feel like simple cutting the old pvc and filling it with dirt or concrete and moving the pole over like 6 inches would have saved us all time.
You're not wrong--but we would have had to move over more than 6 inches, and I wanted it there. 🤣
How about a CRAZY idea, just put the pole NEXT TO where the old one was, is two feet in any given direction around it really going to make a difference? Just cut off that old pvc with a sawzall and bury it and put new grass old one gone!
You uh... you make a good point. But I'm stubborn! 😂
Glad your back
Thanks!
That was actually pretty good lol
You are in Florida, but not south Florida. If you were here the coral rock would be waiting for you. Imagine that concrete slab but 30 feet deep or more. Where is your skid steer?
Working on that! I'm starting things over from scratch so we've go to get all the building blocks in place.
@@SWiFence Where in Florida?
St. Augustine
glad i'm not the only one that has shit that never works like you think
This was a train wreck I never saw coming 🤦♂️
They make an adaptor to change from a 2" flagpole to a 3" flagpole.
Which tool exactly is the squiggly saw again?
Flag poles gonna be illegal soon ...glad you got yours in lol
Especially ones that look like that 🙄
I would of rented a skid loader with a breaker and hole digging attachment and been in 10 min, f that
Hey there from down under, I loved watching you trying to get the pvc out, while 1 of ya boys scratching his nuts, & the other 1 watching you struggling, frigging hilarious , The end result bonus laughs watching ya son hold a blower to make the flags move, lmao classic, I think you & HAXMAN should DIY tubing together, because you both are frigging funny.. Peace & Harmony from South Australia Adelaide.. :)
We've done a couple together already. Thanks for watching!
How many batteries did you go through?
Let's not talk about that. 😆
Wyoming strong!
Absolutely!
Wanna borrow a fence post puller?😊
That’s legit how they tell you to install a flag pole. Second they make adapters to adapt to smaller sleeve and bigger flag pole
The ultimate Father / Minion bonding experience…. What better way to teach persistence and patriotism than to spend the day putting ONE hole in the ground to raise the flag???
Not gonna offer any advice except to suggest…. For the next bonding…. Find a job where the minions can show you how it is done…. While you spectate!
where exactly did you get your flagpole from??? Thanks
www.colonialflag.com/flagpoles/
What's the size of the flagpole?
3" x 20'
Don’t you have a shovel?
why didnt you just move it over 6'' ?
I liked that spot. But you do have a point. 😄
Why didn’t I just make a new hole and start fresh
True. 😆 Why didn't I? Because I wanted it there I guess. 🤷♂️
Bury the old hole and dig a new one 16 inches over.
You do have a point. But I'm stubborn. 🤣
MOVE the site over maybe 2 feet.
Yeah, not a bad idea. I'm stubborn though.
Need to put a Trump flag up there!
No dry stuff in the corners…….of a round bucket. 😳😳🤣🤣
😆 Ok wise guy, what would you call the side of the bottom of the bucket? 😏
@@SWiFence the edge of the bottom of a bucket. Just busting your chops. We’ve all done or said stuff like that.
Honestly, I would have moved it to another location
Not a bad idea. Once I set out to do something though, it's hard to call it quits.
My question is if you were planning on digging a hole anyway, why didn't you just move over several feet and dig your new hole. Seems to me you were just wanting to make a comedic video promoting Haxman.
Listen, I could've moved over and kept digging--but I'm stubborn like that. I hate not accomplishing what I set out to do--I'm not saying that's the best trait in the world, but it's how I see the world. You're absolutely right--moving over would've saved us quite a bit of work. 🙄😁
do your fencing jobs take this long:)
Oh SNAP! 😲 Feel the burrrn.
That was to much like work. Lol.
Way too much!
After getting the drill backed out, I would have moved to another location and used your plan A....While the old owner is laughing his sides off... Lets hope you're a better business thinker than a DIY'er or it's doomed... Don't do what he did, work smarter not harder...
I generally believe in smarter, not harder. But this day I was feeling pretty stubborn. 😂
1st mistake, not putting it in writing that you wanted the original flagpole.
"Water, lots of water" - oh and don't feed the diabetic police horse!
🤣
sadly disappointed I was honestly expecting you to put fire crackers down the holes and blow it out lol
Wish I'd thought of that! 👍🏻👍🏻!!
@@SWiFence no idea if it would have worked but would have been entertaining to have found out LMAO
Wouldn't it have been easier to dig a new hole in a different place? Less labor and the minions could have dug the hole.
You do... you do have a point... But I'm stubborn like that. That's where I wanted it. 🤣🤣
Make sure you leave name of the new construction company ..
SO WE CAN AVOID IT.
Just kidding don't panic
😆
.
.
Definitely not a pro working in flip flops!
Can’t watch anymore.
Just move the hole 2’ and stop saying your stubborn!