RCBS Automatic Priming Tool
Vložit
- čas přidán 10. 08. 2023
- Find the Automatic Priming Tool here amzn.to/47neoZW
Big shout out to @ErikCortina @Ultimatereloader and @rcbsreloading for all they did during the #rockchuckolympics
Join Patreon / fclassjohn for full length videos, live chats and more.
Help support my channel by shopping Amazon amzn.to/35YA4h8
DISCLAIMER: This and all videos on my channel are not meant or intended to be viewed by anyone under the age of 18. This video and description may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! Videos on this channel are for informative, and entertainment purposes only. Using any of the information is at the risk of the individual using the information. We (including CZcams) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. By viewing or flagging this video you are acknowledging the above. #fclassjohn #reloading - Sport
Another excellent real world review, thank you John. I’ve used this tool with identical results as the video, about 2 thou total variant. Then I installed the Holland’s Perfect Primer Seater kit, which is essentially an adjustable travel stop for the handle. Seating depth total variation now is realistically around 1 thou. I usually get 50 cases in a row to measure the same.
It’s biggest advantage is that it saves wear and tear on my aching hands while still allowing tactile feedback when seating. When used with a quick change mount like Inline Fabrication, it’s a great tool.
I've been using one of these since the 80's. It's a great tool, and the affordable price makes it that much better. A lot of the tools available these days are just ridiculously priced. This one is a winner in all regards - inexpensive, simple, effective.
Agreed.
I have one and love it. I loaded 100 cartridges in a matter of minutes!
Hey John, nice review of such a great product. 👌
When I initially saw the box I thought RCBS has a new product but as you reviled its contents I saw it was the same priming tool I've been using for the last 30 or so years and LOVE it! As you pointed out, I have mine mounted to a tool plate and use 4 button head screws to mount it when in use. It's a beautiful robust design which allows me to "feel" the primer bottom out. It's the only way I prime brass other than on my Dillon press.
Thank you for the kind words and yeah, really tough system to beat for the money.
I've had one back when they first came out back in the 80's. No regrets on owning one. Great review john.
Thanks 👍
Great video, thanks. I bought one of those a couple years ago, I'm a bit older and thought that this would be better for my hands than the hand primer tools. Works great. When I can't manage this tool for priming, I guess it would be time to hang it up, not there yet!!!.
Hang in there :). And there are ways to make the tool handle more comfortable and easier to use.
The Holland's Perfect Primer makes the RCBS Auto Prime 1000% better.
I looked it up looked it up but it looks like they only sell a full unit? Where it the one that attaches to the rcbs?
@@thelittledetailscr7231on Holland's product page under parts and accessories
A 1000 times better is a huge overstatement - I’m familiar with the Holland ‘add-on’ but frankly I’m not sure it improves the RCBS unit in any way that really matters. It does make the RCBS tool somewhat more laborious to use though.
It turns the rcbs into the poor man’s cps
Still using my hand primer,rcbs. After watching your trimmer comparison video I bought the Henderson,best money I have spent !
Great to hear!
I’ve been using one of these for a year or so. It works well and since I got a Double Alpha Primafill tube filler it’s even better. No more hand cramps.
That's a great way to do it.
I recently purchased a RCBS Auto Priming tool and love it! But I mounted it to my bench using an Inline Fabrication Quick change mount! It works great and doesn't take up a lot of room!
That is awesome!
I have this, and it's easily the best priming tool of them all.
No, I don't like hand priming tools.
Those are bound to eventually cause all kinds of hand problems, especially carpal-tunnel.
Yep exactly how I feel. I've always sought out priming tools that help my hands feel better.
My favorite priming tool. A little blue Loctite on the primer stem threads will save some headaches. Not all shell holders will allow the primer stem to pass through. You may need an RCBS holder or ream out the hole in the shell holder. I have a gooseneck light on the bench with a layer of rubber padding that the primer tube bumps into to prevent that annoying bounce. For priming a lot of cases wrapping the handle with grip tape helps your hand.
I put a 1" pipe plastic pipe over the handle to make it more comfortable. It also extends it to where I want it to be.
Love mine!
I've had one of these sense 1985 and I use it on every case I load.
That's fantastic to hear. I know lots of people love theirs.
I’ve been using one for years after trying most hand primer tools. My only issue is that the seating stems sometimes stick once they’ve received a primer (i.e. they don’t fall down due to gravity once you lift the handle). It provides great feedback on the seating process and enough leverage to seat. Nice review.
I've experienced the same. Not sure why that happens tbh
When mine does that I find that the stem is loosing up and catching on shell holder.
Very similar to the primer feed system on my rock Chucker
if you unscrew the set screw holding the shellholder you can adjust primer seating depth . not a lot but it helps with primer seating depth . i found this out when i took mine apart for a good cleaning . machining a few groves in it would help get seating depth right were ya want it . someone with a leagth could di that in a few mins .
Based on your review, I bought it. Still refining my technique/feel, but getting .003 variation in depth (and my measurements without an AccuyOne gauge). Otherwise like it!
I modified mine with a piece of gorilla tape where the arm contacts the base, and a rubber band from the upper arm back to a screw in my table. No annoying bounce, or noise. Been using this for 20 years, simple and inexpensive!
Good idea, I know the Holland kit also does something similar with a return spring that helps.
Using the T Track on your bench is a pretty baller idea.
Thank you. It seemed like a good idea and while I don't use it all the time it's nice to have when I need it.
I really like the older RCBS APS 'strip primer' bench priming tool I have. Of course I have the other tool to reload the APS primer strips.
I know a lot of people miss the APS system. I'm guessing it just wan't cost effective 🤷🏻♂️
great video! what was that gague u used????? i would like one of those tools! it looked like the ase of the case was form fitted to it, to easily see the seating depth??? great video ! i am glad it popped up in my feed !
Thank you so much for the kind words. Here’s that gauge for you bullettipping.com/2018/05/accuracy-one-precision-primer-gauge/
I now want you to try out or at least look into the pcps
Wonder how it compares to the Lee auto primer tool looks well built.
I use the RCBS hand primer, just as fast, easy to store, and less things to go out of order. Pretty trick but I will pass. Mostly I just use the system on my 550B.
Have you ever used Lee's Auto Bench prime? Was hoping to get your thoughts on that priming tool.
No, I've only used the Lee ACP and I liked it as well.
John would you use it for your FClass competition rounds? Is the difference between this one and the PR Competition Seater worth it? Thanks.
I would have zero issues using this for competition rounds and did it for a while before I started using the Dillon to prime. I know other top competitors who use it as well.
Do you have a video about this track by any chance? I think that would be interesting content - maybe a video themed around work bench setup
czcams.com/video/aQcIm4ee7mg/video.html
And here's a playlist of work bench videos czcams.com/play/PLwwXur6w5_tAWmF4-IT2SKrDKqPjHSsD7.html
What's the case adapter you're using on your depth gauge @fclassjohn?
Nevermind... they don't ship internationally.
Save your money and buy a Lee bench primer. Cost way less it is faster to use and dose the job just as good!
have had mine since the 1970s......
How do you install the clamps on that T track if neither end of the track is open?
I routed out just enough wood at the end of the track so I could insert them as needed and then I just have a small plug to fill that cavity all the other times when I'm not using clamps there.
I’ve been using the RCBS Universal hand priming tool. It’s easy and no need to mess with bench space.
...until you wind up with carpal-tunnel syndrome.
@@Gunners_Mate_Guns it’s great hand exercise, they sell a spring to make your hands stronger, mind as well get something done at the same time
The Lee bench prime is way less ridiculous, and also less than half the price. No crazy flipping primer tube.
Never used one bur use a lee auto primer for bench top. Would like to use one just to see how it feels
I've never used a Lee Auto Primer, but I can say that the RCBS tool is the best one I've ever used for priming. If the Lee ever gives up the ghost, give the RCBS tool a shot.
@@l800x8 will do.
I ordered this just so I don't have to change my 550 over to large primers every time I end up loading 7-6.5 PRC and 300 norma.
Put a pool noodle on the handle and it makesitway more comfy
Good idea.
Saving my pennies to get the CPS
Ehhhh not worth
Wait? A you tube review that isn’t exactly 10 minutes with exactly 4 ads that gets right to the point of the video without 8 minutes of excess bullshit in between?????? Blasphemous!
As soon as you could make money off a channel is when it went to shit
what primer tool was that ? @ 5:45
It's the accuracy one primer depth gauge
@@FClassJohnty ! wow it’s pricey too
I had one. I absolutely hated it.
Same it sucks
No, I think it’s too flimsy . Specially, the primer tube is swinging back-and-forth. But I hope RCBS will come out better idea of this🤔👍