How to fix: Steering Vibration When Braking |Skoda Fabia 1.4tdi|
Vložit
- čas přidán 8. 09. 2024
- Today's video is on how to fix a shaky steering wheel while braking. This is a very common problem found on VW group cars. The car used in this video is skoda fabia 1.4tdi. The footage for this video was shot before covid 19 lockdown. I request all to stay home and stay safe. I hope you all liked this DIY video which can save you a lot of money.
special thanks to Syed Wilayath for helping me out with the camera
please like and subscribe if you find this video useful #
for online workshop manual:
Song: Sappheiros - Smile
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • Sappheiros - Smile (Vl...
#NoCopyrightMusic #VlogMusic #VlogNoCopyrightMusic
Category
Music
Great videos. I have a VW Polo which shares a lot of common parts with your Skoda and the pads and discs need replacing so this video was perfect. I also saw your other video on the bush replacement which is another job I am planning to do in the near future.
Other videos you might want to consider doing in the future would be replacement of the shock absorbers, fuel filter, and other similar jobs which would normally need to be carried out on this type of vehicle at around the 10 year/100,000km mark. I believe that by performing such maintenance, a 10 year old car should have a further 10 years of useful life with minimal maintenance such as oil & filter changes etc.
Wish you well with this channel as you seem to have a natural talent not only for maintenance but also skill in producing this kind of footage.
Good job faaiz!
#mechanicalengineer💪💪
Well done 👍🏻
Really helpful
Well done boy👌👌
Good job
Thank you 😊
Well Done Faaiz
Thank you sir
Well done !🙂
Thank you Ma'am
👌
Very good and helpful video da! 🔥
Good one buddy 👌
How to procure bush Ansari ji⁉️
By the way your videos are highly informative. Thanku.🙏
The bushes are easily available in market and boodmo. You can even install polos bushes since polo, vento, rapid, ameo and fabia shares the same lower arm bush and suspension components. But if your car is 2008 or 2009 model the bush design is different and non of the above cars bush will fit. And one more thing to keep in mind is buy good quality bush. In the above video I have changed mine with vika which is not that great it only lasted me 1 year. Try to get German brands as they tend to last more.
@@FaaizAnsari dhanyawad ji
Hello Faaiz,
Your videos are going good.
All the very best.
I have couple of doubt. I would like to get in touch with you.
Sure you can whatsapp me on this number 😁 8792267274.
👍🏻👌🏻👌🏻
👍
Hello I have a same car 1.4 TDI, I want to upgrade 288mm disc, calipers and pads of brand brembo. So, it is possible to upgrade with this model?
Yes it is possible but just make sure that there is enough clearance if your using the stock 14 inch alloys, inside the wheels.
Ps just curious why you need a big brake kit for 1.4tdi
where is your garage ?
I don't have any garage. My garage is on wheel☺️
owning skod mean we have to become mechanic right .. ?
I bought 2nd hand, Skoda Fabia, i saw a lots of pain points
All is not true it's just that the mechanics and the ASC takes advantage of the customer saying it's complex cars, German etc etc . Well sometimes they do go wrong but at the end of the day when everything is going well it's sure drives great.
Mechanic huh?
Hello Ansari I am from Haldwani I have a code in my skoda Laura 1.9 tdi pd. The car is hunting at 1500-2000 rpm. I scanned the car and get a code p1267 control limit exceed cylinder 3. Can you help me what the exact problem
The problem seems to be related with the cylinder number 3 injector. There can be three possible culprits here
1.the delay in the injector may be due to debris build up
2.the wiring of the injector, loose wire or cut wire can cause this
3.the injector it self can be faulty.
You can take the car to a injector service specialist after the lockdown he can diagnose it properly and say what is the exact problem in it.
@@FaaizAnsari ok I checked injector loom already. Wiring is good
Then get the injector checked with a specialist they will check all the injector individually for the amount of fuel that is being sprayed from the nozzle. If there is any variance in the spray pattern then injector can either be serviced or should be replaced.
Ok got it thanks.
Ayo Chetan mechanic aano?
😂
How much it cost ??
For resurfacing it only costed me 500 rupees in Hyderabad. The price of resurfacing are between 500 to 1000 it depends on the city too.