i had the Match UP8DSP installed today on my 2022 Lexus RX350L. WOW, its so much better than the stock amp. I also upgraded all the factory speakers to JL Audio C2's
does this have a noise generator in it , be very handy to set the unit to a flat response ,,, then use the flat response to eq the input from a pre equalized head unit , like a base bmw unit ,,, just a thought , for the effort taken it would be a mighty feature .
Hello, I bought a Match PP41DSP and I have a BMW E90 but there is no mode on the box for bmw, only VW, Skoda, Mercedes and Audi. Does it work if I select one of those modes? Or do I specifically need a BMW Mode? If yes, I have the hardware, is there any way to install a 17th mode for my bmw? Thanks.
Hey they are not as good but will work too. You got the match pp41dps international version (not bmw version) with random brands. How have you liked the pp41dsp?
@@TF-qd8ru In this case the PP 62DSP is directly powered from the vehicle´s car radio harness. For additional information please take a look at the manual of the PP 62DSP which can be found at www.audiotec-fischer.com Best regards
Hello, The PP 86DSP has to be connected directly to the battery by using adequate cables and the positive cable should be provided with a main fuse at a distance of max. 30 cm from the battery. For more information on the power connection, refer to its instruction manual. The manual can be found here: www.audiotec-fischer.de/match/verstaerker/pp-86dsp Best regards Yours Audiotec Fischer Team
How to connect this with the most network in a volvo v70 2013 with the supplied cable 12+2 for Volvo? Also, how do the pp86dsp handle the most signal to the subwoofer?
Hello, Unfortunately we do not offer a Plug & Play solution for the Volvo MOST network in our product range. To adapt the MOST signal our HELIX SDMI25 can be used. Therefore, please contact a HELIX / MATCH dealer in your area. Thanks! Best regards Yours Audiotec Fischer Team
I’m using this amp with the rca out to another amp for the sub but I can’t get the control to work with sub volume and master volume but the button works to select the sound program. I’m baffled (mk7 golf)
Hello In order to reply to your inquiry as soon as possible please contact our technical support by using the contact form on our website www.audiotec-fischer.de/en/contact. Kind regards Audiotec Fischer
@@audiotecfischer9748 Problem is you do not seem to answer, tried to get answers too but never a single reply from message, strange with such a quality manufacturer failing the customer bit so hard imho, weeks gone by and still nothing even when trying again. For the cost of a 86DSP I can get another brand DSP + a small amp, not the simplicity from Match but most def a reply within a day or 2 tops which is worth equally imho. Really sad cause you had a product here, German customers seem happy, but again you prioritize anything German over the international market it looks like, Germany is tiny compared to the international market. the faster that is comprehended the better for us all. English first and foremost, German second is how I would have run the company but hey that's just me. Perhaps you do not even see it yourselves, human bias is a funny thing that way and as humans we are all flawed. Love the products though, engineering is top notch, applauds for that.
@@luffararnesugerkuk Hello, We are very sorry. We have just checked our emails but did not received any from you. We always reply to our customer emails very fast. Best regards Yours Audiotec Fischer Team
I have a question, I have 2017 BMW 330xi with Hi-Fi, I have upgraded Tweeters, Mids front and Rears and two under seat Subwoofers also installed Match PP86DSP DSP Amp, I bought all this from Bimmertech. I feel I need more bass, can I add Match PP 7S-D Compact trunk Subwoofer and not loosing existing underseat subwoofers?
Hello, the amplifier can drive either only the under-seat subwoofers or a PP 7S-D subwoofer. For more bass performance we recommend to connect e.g. a HELIX M ONE amplifier in combination with a HELIX K 10E.2 subwoofer to the Line Output of the PP 86DSP. Best regards!
Hello Alanas Kazlauskas, Unfortunately it is not possible to connect a PP 62DSP to Volvo vehicles with High Performance Sound System. Please contact a MATCH specialist dealer in your area. He can offer you an individual solution. You can find an overview of all MATCH dealers here: www.audiotec-fischer.de/en/dealer Best Regards! Yours Audiotec Fischer Team
Hello manolo_yt5136, the M 5DSP delivers slightly more output power for the speaker systems in HighPower mode and offers more flexibility in the choice of subwoofer. Best regards Yours Audiotec Fischer Team
Hello @@johnmachter40 The MATCH PP 62DSP and the M 5.4DSP are both powerful DSP amplifiers. While the PP 62DSP was specially developed for plug & play applications, the M 5.4DSP offers versatile application possibilities in the car audio sector. For example, with the ACO platform, the M 5.4DSP provides enhanced configuration and sound tuning functions. Additionally, the M 5.4DSP is equipped with a HighPower mode, resulting in higher output power on channels A-D compared to the PP 62DSP. Despite offering similar features, direct comparisons are not possible as the M 5.4DSP cannot be regarded as a direct successor to the PP 62DSP. Best Regards! Yours Audiotec Fischer Team
@@audiotecfischer9748 thank you. i have one remaining question. i have read that some people notice an elevated noise floor, ambient noise with all M 5.4DSP devices, even when exchanged for a second one and all settings resettet. As i am quite sensitive to noticeable noise floor or ambient noise in quiet passages of classical music, does the pp62 /pp86 dsp has lower noise floor compared to the M 5.4 DSP?
@@johnmachter40All three amps have a very comparable ground noise. But we notice that several car radios today have an elevated ground noise which will be further gained by adding an external amplifier. Besides that it is important to make sure that the overall gain of the M 5.4DSP is properly set in our DSP PC-Tool software. Some people tend to increase the gain although the default value is the best choice in almost every use case. Best regards
Hello, A red flashing LED means that the currently selected sound setup memory is empty. A new setup has to be loaded via the DSP PC-Tool software from our website (www.audiotec-fischer.de/en/matchdatabase/soundIndex) or the internal MicroSD card reader or switch to the second memory position with existing sound setup. If there is no sound setup for your vehicle in our database, please contact your MATCH dealer. He can then create an individual setup for you. Best regards Audiotec Fischer
i had the Match UP8DSP installed today on my 2022 Lexus RX350L. WOW, its so much better than the stock amp. I also upgraded all the factory speakers to JL Audio C2's
How’s the response of c2 ? I have installed c2 components in front and coaxial in rear
@@viveksingla2109 so much better tuned with match amp. recommend it! the factory amp sounded god aweful
does this have a noise generator in it , be very handy to set the unit to a flat response ,,, then use the flat response to eq the input from a pre equalized head unit , like a base bmw unit ,,, just a thought , for the effort taken it would be a mighty feature .
Hello, I bought a Match PP41DSP and I have a BMW E90 but there is no mode on the box for bmw, only VW, Skoda, Mercedes and Audi. Does it work if I select one of those modes? Or do I specifically need a BMW Mode? If yes, I have the hardware, is there any way to install a 17th mode for my bmw? Thanks.
Hey they are not as good but will work too. You got the match pp41dps international version (not bmw version) with random brands. How have you liked the pp41dsp?
do i need to run power directly from the battery to the pp62dsp for a 2016 vw touareg if i am also using the pp7e-d subwoofer?
Hello, in this case it is not necessary to connect the PP 62DSP directly to the battery.
@@audiotecfischer9748 Where does the amp get its power from?
@@TF-qd8ru In this case the PP 62DSP is directly powered from the vehicle´s car radio harness. For additional information please take a look at the manual of the PP 62DSP which can be found at www.audiotec-fischer.com
Best regards
Hello, does de PP86DSP need a direct power line between the battery and the unit? Thank you
Hello,
The PP 86DSP has to be connected directly to the battery by using adequate cables and the positive cable should be provided with a main
fuse at a distance of max. 30 cm from the battery. For more information on the power connection, refer to its instruction manual. The manual can be found here: www.audiotec-fischer.de/match/verstaerker/pp-86dsp
Best regards
Yours Audiotec Fischer Team
How to connect this with the most network in a volvo v70 2013 with the supplied cable 12+2 for Volvo?
Also, how do the pp86dsp handle the most signal to the subwoofer?
Hello,
Unfortunately we do not offer a Plug & Play solution for the Volvo MOST network in our product range.
To adapt the MOST signal our HELIX SDMI25 can be used. Therefore, please contact a HELIX / MATCH dealer in your area.
Thanks!
Best regards
Yours Audiotec Fischer Team
I’m using this amp with the rca out to another amp for the sub but I can’t get the control to work with sub volume and master volume but the button works to select the sound program. I’m baffled (mk7 golf)
Hello
In order to reply to your inquiry as soon as possible please contact our technical support by using the contact form on our website www.audiotec-fischer.de/en/contact.
Kind regards
Audiotec Fischer
@@audiotecfischer9748 Problem is you do not seem to answer, tried to get answers too but never a single reply from message, strange with such a quality manufacturer failing the customer bit so hard imho, weeks gone by and still nothing even when trying again. For the cost of a 86DSP I can get another brand DSP + a small amp, not the simplicity from Match but most def a reply within a day or 2 tops which is worth equally imho.
Really sad cause you had a product here, German customers seem happy, but again you prioritize anything German over the international market it looks like, Germany is tiny compared to the international market. the faster that is comprehended the better for us all. English first and foremost, German second is how I would have run the company but hey that's just me.
Perhaps you do not even see it yourselves, human bias is a funny thing that way and as humans we are all flawed. Love the products though, engineering is top notch, applauds for that.
@@luffararnesugerkuk Hello,
We are very sorry. We have just checked our emails but did not received any from you.
We always reply to our customer emails very fast.
Best regards
Yours Audiotec Fischer Team
I have a question, I have 2017 BMW 330xi with Hi-Fi, I have upgraded Tweeters, Mids front and Rears and two under seat Subwoofers also installed Match PP86DSP DSP Amp, I bought all this from Bimmertech. I feel I need more bass, can I add Match PP 7S-D Compact trunk Subwoofer and not loosing existing underseat subwoofers?
Hello,
the amplifier can drive either only the under-seat subwoofers or a PP 7S-D subwoofer.
For more bass performance we recommend to connect e.g. a HELIX M ONE amplifier in combination with a HELIX K 10E.2 subwoofer to the Line Output of the PP 86DSP.
Best regards!
@@audiotecfischer9748 would it work if I upgrade Amp to Match Up 7BMW amp?
@@pasttraveller5767 Hello Past Traveller, this is also not possible with the UP 7BMW.
Hello, just looking into this amplifier, does the conductor work on the PP62DSP?
Hello! The Conductor is unfortunately not compatible with the PP 62DSP. Best regards
@@audiotecfischer9748 thank you very much for the answer.
I have a Volvo s60 2012 whit the high premium sound system and I need the cable harness to connect to the stock stereo
Hello Alanas Kazlauskas,
Unfortunately it is not possible to connect a PP 62DSP to Volvo vehicles with High Performance Sound System. Please contact a MATCH specialist dealer in your area. He can offer you an individual solution. You can find an overview of all MATCH dealers here: www.audiotec-fischer.de/en/dealer
Best Regards!
Yours Audiotec Fischer Team
Hello. I have a Golf 7 and wanted to know if there is a sound different in the m5dsp or the 62dsp :)
Hello manolo_yt5136,
the M 5DSP delivers slightly more output power for the speaker systems in HighPower mode and offers more flexibility in the choice of subwoofer.
Best regards
Yours Audiotec Fischer Team
@@audiotecfischer9748hello. And how does the minidspm 5.4dsp compare to the 62dsp?
Is the m 5.4dsp the successor of the pp 62dsp?
Hello @@johnmachter40
The MATCH PP 62DSP and the M 5.4DSP are both powerful DSP amplifiers. While the PP 62DSP was specially developed for plug & play applications, the M 5.4DSP offers versatile application possibilities in the car audio sector. For example, with the ACO platform, the M 5.4DSP provides enhanced configuration and sound tuning functions. Additionally, the M 5.4DSP is equipped with a HighPower mode, resulting in higher output power on channels A-D compared to the PP 62DSP. Despite offering similar features, direct comparisons are not possible as the M 5.4DSP cannot be regarded as a direct successor to the PP 62DSP.
Best Regards!
Yours Audiotec Fischer Team
@@audiotecfischer9748 thank you. i have one remaining question. i have read that some people notice an elevated noise floor, ambient noise with all M 5.4DSP devices, even when exchanged for a second one and all settings resettet.
As i am quite sensitive to noticeable noise floor or ambient noise in quiet passages of classical music, does the pp62 /pp86 dsp has lower noise floor compared to the M 5.4 DSP?
@@johnmachter40All three amps have a very comparable ground noise. But we notice that several car radios today have an elevated ground noise which will be further gained by adding an external amplifier. Besides that it is important to make sure that the overall gain of the M 5.4DSP is properly set in our DSP PC-Tool software. Some people tend to increase the gain although the default value is the best choice in almost every use case.
Best regards
Please help guys. My PP62DSP is flashing a red LED and not responding to anything. Anyone know what to do?
Hello,
A red flashing LED means that the currently selected sound setup memory is empty. A new setup has to be loaded via the DSP PC-Tool software from our website (www.audiotec-fischer.de/en/matchdatabase/soundIndex) or the internal MicroSD card reader or switch to the second memory position with existing sound setup. If there is no sound setup for your vehicle in our database, please contact your MATCH dealer. He can then create an individual setup for you.
Best regards
Audiotec Fischer
gay voice over
true lmao