video 2 of the Rust-Oleum saga on how to spray a clear coat over Rust-Oleum paints #circletrack #auto #racing #fabrication #shorttrackracing #humor #diy #nascar #painting
Aren't you going to buff it? What about putting a second clear coat after buffing? You are the only guy I know who put a clear coat over their Rustoleum paint job. I keep on telling those others that putting a clear coat will make it look much better and last much longer. Thank you for proving my point.
Thanks for the sub no I didn't buff it I think I was caught up in the moment after I sprayed it the next one I do I'm going to experiment further with I appreciate your comment as well
@@ehrhardtmotorsports8280 So will you buff out the next one? I watch another paint channel where he puts 3-4 coats of clear coat in successive layers in one shot and then buffs it out and it is absolutely amazing. What'ja think? On a project that is worth putting that extra work into?
How long did you wait before shooting the clear...Do you wait until its dry to touch, wait for the one hour recoat time listed on the can... Not sure I understand the proper timing to shoot the clear over rustoleum. Great job btw. Looks awesome!!!
Great videooooo as always. Got a question for you can you do a video painting another fender but this time wet sand it to eliminate the orage peel just to see how it woul look like .
I let it sit overnight sanded with 220 wet sanded some areas with 400 then before we sprayed went back with the maroon 3m scotch Brite and scuffed to ensure we had everything I appreciate the like and subscribe Mike I am going to do a follow up video for q&a
I seen horror stories about solvent clearcoat interfering with rustoleum and bubbling or wrinkling. How did you avoid that? Some say let rust-oleum cure for a month. That's way too long
Please put a mask on I painted two and developed a nasty cough and it was during times I was spraying clear seeing how clear dry faster think of the same effects in your lungs job looks great
Ya it got a little overwhelmed I eventually put on the respirator definitely will be taking the time to put it on more often appreciate your comment and checking out our channel 💯
Typical redneck , spray without a respirator. Best if you chew at the same time. 😊. Put the respirator on after just for clear. Only one of ya needs it for 2k. Heck, he can hold his breath or use his shirt. Lots of solvent pop.
Aren't you going to buff it?
What about putting a second clear coat after buffing?
You are the only guy I know who put a clear coat over their Rustoleum paint job.
I keep on telling those others that putting a clear coat will make it look much better and last much longer.
Thank you for proving my point.
Thanks for the sub no I didn't buff it I think I was caught up in the moment after I sprayed it the next one I do I'm going to experiment further with I appreciate your comment as well
@@ehrhardtmotorsports8280
So will you buff out the next one?
I watch another paint channel where he puts 3-4 coats of clear coat in successive layers in one shot
and then buffs it out and it is absolutely amazing. What'ja think?
On a project that is worth putting that extra work into?
@@indrekkpringi oh definitely you can make one of these paint jobs really pop and deep with the buffing
Kinda country until you hear the music. I just restored an old massey ferguson 1085. Did rustoleum with clear. Looks amazing
Good deal man
Looks good guys!
Thanks Mark we appreciate the comment 💯
How long did you wait before shooting the clear...Do you wait until its dry to touch, wait for the one hour recoat time listed on the can... Not sure I understand the proper timing to shoot the clear over rustoleum. Great job btw. Looks awesome!!!
Yes you can wait 30 to an hour I have sprayed both ways back to back and next day on the next day clear I always use a scotch Brite to scuff
It looks very good
Thanks Tracy 🤙💯
Looks nice
Thanks bud
Amazing.
Thanks liberty tree for the comment
Well Done Bro
Thanks dude 🤙
Great videooooo as always.
Got a question for you can you do a video painting another fender but this time wet sand it to eliminate the orage peel just to see how it woul look like .
Shure can
@@ehrhardtmotorsports8280 thanks 👍
Nice job. What air pressure did you spray the fend and the car at with the rust-oleum paint?
Thanks man run about 20 to 28
Nice
Thanks man
when you put the 1st coat of black paint down how long did you wait before you hit with sandpaper? what grit paper and wet or dry?
I let it sit overnight sanded with 220 wet sanded some areas with 400 then before we sprayed went back with the maroon 3m scotch Brite and scuffed to ensure we had everything I appreciate the like and subscribe Mike I am going to do a follow up video for q&a
How long did you wait before you apply the clear coat
I did it back to back
NICE JOB!!! What does it cost to get a rust-oleum job on my 96 Ford f150 ? 😎
$125.00
I seen horror stories about solvent clearcoat interfering with rustoleum and bubbling or wrinkling. How did you avoid that? Some say let rust-oleum cure for a month. That's way too long
It's all in the hardner and acetone bud
What clear coat did you use?
I'll have to go back and look it was a shopline PPG clear
Please put a mask on I painted two and developed a nasty cough and it was during times I was spraying clear seeing how clear dry faster think of the same effects in your lungs job looks great
Ya I hear ya
😎👍
Thanks bud
What type of clear did you use ?
I used a PPG clear called shop line I'll be experimenting with another clear here this week
What make and model car is this?
It's a race car bud
@@ehrhardtmotorsports8280 ok
Is there a way I can message you?
Yeser through Facebook just look up ChrisEhrhardtracing and send me a message
Mate you did not show shit excellent job
There is a part 1 video the one you watched was part two 🤙
Back for pt 2, but where is your MASK guys?
Ya it got a little overwhelmed I eventually put on the respirator definitely will be taking the time to put it on more often appreciate your comment and checking out our channel 💯
Get yourself a LVLP gun. Thank me later. :-) They're cheap & you get waay less overspray flying all over.
Thanks man
@@ehrhardtmotorsports8280 Nice job on the paintwork btw - you kinda do stuff like I do stuff, as in just do it.:-) Subbed.
@@jamesward5721 thanks bro really appreciate it
Pay a pro and get it done right😮 don't be chintzy😮
how could you allow your friend hold the hose with no respirator totally irresponsible
Thanks for your comment have a awesome day 👍
Thanks ... you too and be safe out there@@ehrhardtmotorsports8280
Typical redneck , spray without a respirator. Best if you chew at the same time. 😊. Put the respirator on after just for clear. Only one of ya needs it for 2k. Heck, he can hold his breath or use his shirt. Lots of solvent pop.
how much for paint my lawn mower apple cider Red
$24.99