Vaterra SS Camaro Brushless 3s Run

Sdílet
Vložit
  • čas přidán 15. 09. 2019
  • Running a 3s 3200 mah 40c Lipo in this car for the first time. I am still running the stock gearing, which as it turns out is no big deal. This car really wakes up on a 3s Lipo.
  • Zábava

Komentáře • 32

  • @TheK20eg
    @TheK20eg Před 3 lety +2

    Is this 3s on stock electronics?

    • @beyondthebluerc1
      @beyondthebluerc1  Před 3 lety +4

      I upgraded to a Dynamite Brushless ESC/motor combo I bought from my local hobby shop. The stock system is brushed and isn’t capable of running on 3s.

    • @TheK20eg
      @TheK20eg Před 3 lety +1

      Edward Turck oh ok yea i have the v100 brushless camaro so i should be fine what 3s battery are u running?

    • @beyondthebluerc1
      @beyondthebluerc1  Před 3 lety +1

      TheK20eg
      I’m running an E-Flite 3200mah 40C 3s lipo. I originally bought it for a plane, but it worked great for this application as well. I am running a 5000mah 3s Spektrum Hard Case Smart Lipo in this rig now. I got it to fit by removing the stock plastic battery hold down and installing velcro straps. In my latest speed run I hit 48mph. I’m running a 28 tooth Hot Racing pinion gear as well. I have a 30 tooth Hot Racing pinion gear I haven’t tried yet. I think I might just be able to hit 50+ if I install it🤔.

    • @TheK20eg
      @TheK20eg Před 3 lety +1

      Edward Turck okay thank you buddy i took the car out today only did 43 mph with stock pinion im running a 1300 30c 3s lipo but unfortunately my slick tires are horrible LMFAOOO cant keep it straight might order some foam tires and test it again thanks for the reply your a big help👍🏼

    • @beyondthebluerc1
      @beyondthebluerc1  Před 3 lety +1

      TheK20eg
      No problem👍 Foam tires will help immensely with handling. Here is a link to my latest vid of this rig running some foam tires I found on Amazon and rocking the Chevy C10 truck body😁: czcams.com/video/IazYn-pfNnc/video.html

  • @moraesmarcobsb
    @moraesmarcobsb Před 3 lety +1

    Great choice

  • @DonGetSlapt
    @DonGetSlapt Před 3 lety

    Nice work but you can hear the car screaming on that stock pinion! I see the the system has a heat sink and a fan, a MUST with that pinion!

    • @beyondthebluerc1
      @beyondthebluerc1  Před 3 lety

      Yeah, I couldn’t leave it stock for long. It has been running on a 28 tooth Hot Racing pinion gear for a while now. czcams.com/video/9NQTQl8UM24/video.html

  • @6spd85notch
    @6spd85notch Před 4 lety +2

    Those transmitters have destroyed a mini 8ight body and my hobao hyper sste body. It seems like they pick up some kind of interference. Both that I have did it In front of the house next door only. No where else just over there. Pretty annoying. $60-80 of bodies destroyed. The hyper sste truggy was on 6s and stuck full throttle from about 15 mph. Can you put larger pinion gears ⚙️ on the vaterra?

    • @beyondthebluerc1
      @beyondthebluerc1  Před 3 lety

      Yeah, I am definitely not a fan of this transmitter. I am running a 28 tooth Hot Racing Pinion gear. Hot Racing makes some fantastic aftermarket products and their pinion gears do not disappoint.

  • @SimeonSales
    @SimeonSales Před 4 měsíci +1

    I just picked up one of these a rolling chassis are you using the stock plastic gears? Do they hold up?

    • @beyondthebluerc1
      @beyondthebluerc1  Před 4 měsíci +1

      I’m still running the stock plastic spur gear and it holds up fine to the 28 tooth Hot Racing hardened steel pinion I am running🤪.

  • @rutger8083
    @rutger8083 Před 4 lety

    Which spur do you have on your car and which gear? A 23t?? Or a bigger one? And how big is the spur 77t or 71t?

    • @beyondthebluerc1
      @beyondthebluerc1  Před 3 lety

      I'm running the stock spur gear and a 28 tooth Hot Racing pinion gear.

  • @jatario2012
    @jatario2012 Před 4 lety +1

    Where did you Get the driveshaft from?

    • @beyondthebluerc1
      @beyondthebluerc1  Před 4 lety

      I got it off Amazon, but unfortunately they are sold out. Amainhobbies and Horizon are sold out too😩. Maybe Ebay🤔

  • @MOONRAKER1922
    @MOONRAKER1922 Před 4 lety

    I have the koyosho camaro and want to put in brushless, my traxxas velenion rotor was too long to fit the gear mesh. What are you running motor and esc

    • @beyondthebluerc1
      @beyondthebluerc1  Před 4 lety +1

      I am running a Dynamite Brushless motor and esc combo that I purchased from my local hobby shop.

    • @pryorkennel
      @pryorkennel Před 3 lety

      Just cut a hole in the back of the mesh to make it fit.. what I did when I put my typhon motor into my v100

  • @TheK20eg
    @TheK20eg Před 4 lety +1

    I got this same car but the 69 ss lol brushless looking to put the fastest motor and best battery in it maybe u can help me pick a motor and a battery hope u reply thanks

    • @beyondthebluerc1
      @beyondthebluerc1  Před 4 lety

      Here is a link to a vid with my latest setup. I am still running the Dynamite Brushless esc and motor combo, which is a fast and reliable setup. It is also a drop in fit to the chassis...just two screws and the esc is mounted😁. It might not be the fastest out there, but I really like it. I am also running a 3s 5000mah 30c Spektrum Smart Lipo, which I am quite happy with.
      czcams.com/video/9NQTQl8UM24/video.html

    • @TheK20eg
      @TheK20eg Před 4 lety

      Edward Turck okay awesome do u have instagram? it would be easy for us to talk lol i got a few questions and i just ordered a battery for the stock engine its a Venom 30C 2s 5000mah 7.4v would it be good for the stock motor?

  • @Rosenquist777
    @Rosenquist777 Před 4 lety

    Witch battery do you use😃

    • @beyondthebluerc1
      @beyondthebluerc1  Před 3 lety

      I am running a 3s 5000mah Spektrum Smart Lipo right now and it is secured with velcro straps.