Thank you man, I'm still waiting on my lower trim piece to come in and I'm happy to see that it's not as hard to install as I thought it'd be. Looking forward to putting the paddles in soon:)
Just to let everyone know if they are curious, it works on a 2012 SE AWC US SPEC. Also there is no need to replace the bottom cover for the steering column, it actually has lines in the inside of the cover if you would like to just modify the original cover yourself. Thanks for posting this video man! Very helpful!
@@OGRCO I wonder what’s wrong with mine then. I plugged in the paddles such as shown in the video and I can’t get them to work. Do you have the Drive/Low shifter?
@@donaldsatterly2085 put it in drive and you have to be moving at least like 5-10 mph then press and hold the + shifter to get it to go into manual mode.
Take off the two cover piece behind the steering wheel and look for a plug with three wires, it should be on the left side behind the steering wheel. If you have it than Yes
It's it's a small plug that's hanging there, it should be for the shifters but I'm not so sure since it's a different colour wires. Mine is a 2011 lancer, I don't know if they have different colour wires for the newer lancer
The upper is 8065A017 and the lower is 8064A015. The link is for the lower trim rrr.lt/en/used-part/imp377215-8065a015-mitsubishi-lancer-steering-wheel-column-trim
Wonder if this works with the 2016-2017 CF model as they’re different enough compared to the 08-15 CJ Lancers to where certain parts would no longer work.
hola,amigo tendras una foto de los cables que estan debajos del volante? porque yo instale las palancas en mi lancer ex que tiene el conector, pero las palancas no funcionan, de echo al conector donde van las palacas no llega ni corriente, si me pudieras ayudar enviandome fotos de los cables debajo del volante o los que pasan por la dirección por favor
@@kprusoe21 tengo ese correo Tomasjaravalenzuela@gmail.com Tom.jara@duocuc.cl Tomas_jara_2@hotmail.com Tengo esos correo,si me puede enviar información a cualquiera de los 3
Just a tip. Before taking off the steering wheel, put a mark using a marking pen so when putting it back, the steering is properly aligned.
Thank you man, I'm still waiting on my lower trim piece to come in and I'm happy to see that it's not as hard to install as I thought it'd be. Looking forward to putting the paddles in soon:)
Where did you find the steering shroud pieces? The upper & lower trims
Y0
@@Kingshock hey sorry, i went to my local Mitsubishi dealership and they ordered it for me. Came within like 2 weeks
Cool man, I hate manual but love at the same time this is perfect
Just installed in my 08 ES, thanks for the info!
Just to let everyone know if they are curious, it works on a 2012 SE AWC US SPEC. Also there is no need to replace the bottom cover for the steering column, it actually has lines in the inside of the cover if you would like to just modify the original cover yourself. Thanks for posting this video man! Very helpful!
I also have a 2012 SE AWC, did you have to change out the shifter assembly to the GTS one?
@@donaldsatterly2085 nope, plug and play!
@@OGRCO I wonder what’s wrong with mine then. I plugged in the paddles such as shown in the video and I can’t get them to work. Do you have the Drive/Low shifter?
@@donaldsatterly2085 put it in drive and you have to be moving at least like 5-10 mph then press and hold the + shifter to get it to go into manual mode.
@@OGRCO I was doing that and it wasn’t working
Amazing video my dude, definitely gotta do this after installing my turbo in my ES.
Nice!!
Is it safe to add a turbo? I have a Lancer SEL 2017
@@ehdmartv If you have a manual then yeah but CVT like me cant do much boost on it.
@@ProjectTwinsAMV bleh, mines a cvt so I guess not.
@@ehdmartv did you complete the turbo build?
Hey man, thanks for posting the video. I was wondering what size screws you used for the bottom holes on the mount? Are they Also 10×3/4?
Thanks bro I’m doing this to my lancer just have to find the paddle shifters
How did you get the torx screws put for the steering wheel. Mine look like they are glued.
Is there a port for cvt transmission? I have 2009 ES CVT
Hey man I have a 2017 SEL and I'm interested in doing this to it. I see your airbag maintenance light was on. Is that because of the paddle shifters?
No. It was from the seat i swap out
Will this work with Lancer EX 1.6 MX 2013
Does this work on 2017 lancer se
Can I do this to my 2012 lancer es with the automatic transmission where it has park, revers,neutral,drive,and L
Take off the two cover piece behind the steering wheel and look for a plug with three wires, it should be on the left side behind the steering wheel. If you have it than Yes
Have you tried swapping the Floor Shift gear selector assembly from a GTS to get the + / - gears?
Nope
I remember reading in a Lancer Facebook group that it doesn't work, unfortunately
@@MyNameIsNidos dang, thanks for the info
Does anyone know if it’ll work for a 2013 lancer es?
How do you engage the shifters since there isn’t a gear setting for it. Does it automatically do it?
just be in drive and press on the shifter and it"ll select a gear for you on fast you are going
Hello i have a plug with blue black and purple is it for the paddle shifters?
It's it's a small plug that's hanging there, it should be for the shifters but I'm not so sure since it's a different colour wires. Mine is a 2011 lancer, I don't know if they have different colour wires for the newer lancer
Can a non cvt transmission work with the paddle shifters?? My car has the connector for the paddle shifter however it's a non cvt transmission ..
No
Im gonna try it see if it does or not.
I heard that it burns ur transmission Can anyone explain to me if that’s true
Hey bro. Do you think the paddle shifts for 2012 Ralliart will fit to 2011 Lancer ES? I would appreciate your response. Thank you!
I'm not 100% but the shifter from ralliart and gts are exactly the same. I got mine off a gts
@@bikinibottomgarage7960 Thank you!
W mans
By any chance are the colors of the wires purple, black, and blue? Thanks, great video!
Wondering that myself as well did you figure it out?
The wires that are on the shifter are blue, green and yellow. The other wires that come with the car are black, white and blue
Where can I buy it? Is there a link online? right wheel.Right rudder.
You can sometimes find them eBay. www.ebay.ca/itm/184646392885
Outlander pedal shift fits on the lancer?
Yes it should fit if it's a 4 cylinder cvt
and it makes the sound of the car shifting even on a CVT?
yes
hay alguna solucion si yo no tengo el conector??
necesito esto
it must be a cvt transmission so that it"ll come with the connector
@@bikinibottomgarage7960 mi transmisión es CVT
Oh. I’m not sure, it usually come with the plug or with the shifters
Do you have the part number for the upper and lower plastic to fit the paddle shifters?
The upper is 8065A017 and the lower is 8064A015. The link is for the lower trim rrr.lt/en/used-part/imp377215-8065a015-mitsubishi-lancer-steering-wheel-column-trim
@@bikinibottomgarage7960 where does it ship from? I’m from the US
@@ehdmartv I think it’s better looking up on eBay. If not you can maybe find it on a wreck auto lancer or Ralliart with paddle shifters.
8065A039XA is the part number
I did end up finding it and installing. Thanks!
Did the install cause your airbag warning light to come on? Did you just clear the codes to get rid of it?
that light was already there due to the srs airbag from the chair. but no, no other light came on from installing the shifters
@@bikinibottomgarage7960 awesome, have you had any troubles or unusual noises since installing them? Transmission seem to be handling it fine?
Nope. Everything is great!
Just finished the install and everything works great. Did the install on a 2012 lancer SE AWC. Thanks man!
That's great!
What is your car model? And is it cvt or conventional?
It's a lancer ES and it's a CVT
I have a 2015 lancer SE do you think it would work with that?
It could work. Check if your transmission is a CVT, if it is than you’ll have a plug behind the steering wheel.
Just checked and I have the plug. Thank you so much for the tutorial.
bro do u think paddles from ralliart would work?
Im not 100% but its exactly the same ralliart and lancer gts
Wonder if this works with the 2016-2017 CF model as they’re different enough compared to the 08-15 CJ Lancers to where certain parts would no longer work.
My paddles won’t down shift. any idea why?
nvm one of my cables was cut(: i’m assuming that’s why i can’t downshift
Your car is cvt or normal automatic ?????
It’s a cvt
hola,amigo tendras una foto de los cables que estan debajos del volante? porque yo instale las palancas en mi lancer ex que tiene el conector, pero las palancas no funcionan, de echo al conector donde van las palacas no llega ni corriente, si me pudieras ayudar enviandome fotos de los cables debajo del volante o los que pasan por la dirección por favor
Can you give me your email so I could send the pictures over?
@@bikinibottomgarage7960 si amigo
Tomasjaravalenzuela@gmail.com
@@bikinibottomgarage7960 sería de mucha ayuda que lo hicieras por favor
@@bikinibottomgarage7960 hola amigo me podrías ayudar por favor
@@kprusoe21 tengo ese correo
Tomasjaravalenzuela@gmail.com
Tom.jara@duocuc.cl
Tomas_jara_2@hotmail.com
Tengo esos correo,si me puede enviar información a cualquiera de los 3
do they even work? if they do how can i use them?
they do work. i included it in the video and how to use it
did u have to unplug the battery or no?
No
Cant find this on amazon lol
mine doesnt work any advice?
Not sure
where can i buy the gear paddle kit?
You can check on FB market if their selling the shifter or their parting out a lancer with shifters or you can check ebay
i found an evolution kit could it work?
I’m not so sure but I would test it out first since it came from a evo, it might hav different plug
at what rpms should i shift
2500 or 3000 is good