Fuel Injection cleaning in less THAN 5 MINUTE/HOW TO clean injection Directly without disassembling

#ALIMECH #injection #cleaning
In this video, i will show you how to Clean the fuel injection in less than 5 minutes Directly without disassembling any injections, it will be direct injection cleaning by connecting carb cleaner can to injector rail, and staring up the engine BUT keep in mind to remove the fuel pump fuse, because we don't need fuel pump to push gasoline, the fuel line is disconnected, carb cleaner can connected instead with an adapter
Half of carb cleaner can can give you best results, and if you of you do it with the whole can, even better
Oring and filter set: amzn.to/3cksUEK
THIS IS MY WAY, I DIDNT COPY ANYONE
I did this method for the first time Jan 27, 2017
• Fuel Injector cleaning...
🔔 Hit the bell next to Subscribe so you don't miss a video!
👨🏻‍💻 Watch my newest video: www.tubebuddy.com/quicknav/latest/UC2lUGn7VN0u3U_M4RSmjQHw
Follow my Instagrams so we can be best friends
-------------------------------------------
/ ali_mechh
/ alimechh
Like my facebook page:
-------------------------------------------
/ alimechusa
**If the video was helpful, remember to give it a "thumbs up" and subscribe and turn the notification bell on, so you dont miss any new videos
Gears I Use:
Canon M50: amzn.to/3beZ4BN
Dji Ronin sc Staiblizer: amzn.to/39bvyed
gopro hero 5: amzn.to/2H2ZbSQ
samsong gear 360: amzn.to/37YDj7b
For contact
email address: [e-mail]
Facebook account : www.facebook.c...
Like Facebook page: / alimech-1296961967080160
Follow me
Instagram: ali_mechh
personal Instagram: alimechh

[@Evanturar]

Finally someone who does before and after inspection. Well done. Thank you.

[@AliMECH]

Thanks, I always do on my videos

[@PrimalDesign]

I have a mk6 golf r with 115k km on it, had this car from brand new. Been having misfire at wot past few weeks, changed spark plugs, still same thing, then I did exactly this trick, only for about 45 secs to 1 min of running time on carb cleaner. Now the car is fine, and actually alot smoother on pick ups too! Thanks for saving me hundreds of dollars!!

[@regiscon]

It really does works. My truck is now running way better and improved mpg. What a great inexpensive homemade tool! Thanks

[@AliMECH]

Thanks for the feed back, appreciate that

[@athomewithrobin292]

​@@AliMECHI need to make this gadget

[@baggy-vitamin9166]

Having the same issues with my Mazda. I'm doing this tomorrow. Thank you 🙏🏼 saved me $$

[@kevinmontoya7318]

I was looking for the reason that everyone bases their good video comment on and I found it. He's straight the point thats all. With a good demonstration

[@AliMECH]

Thanks for your feedback, I always go straight to the point, not wasn't time

[@harryblackburn9556]

I'm 71 got my first ASE CERT. in 1974 on the new GM HEI ignitions systems. Working at a GM dealership at the time an old man showed me a way to clean the combustion chambers on any car using ATF, any brand or kind and does an excellent job on injectors. GM use to sell a similar product years ago (in the 70-80"s) that was poured slowly into the Carb. Smoked like chit but cleaned everything from carb to pistons of carbon. ATF burns at a hotter temp than gas when it burns. I've yet to have an issue on injectors getting clogged. 6-8 oz of ATF every 4-6 weeks. I'll continue doing this as long as I live.

[@joncamp9126]

Is this Jet fuel you are referring to. Do you put the 6-8oz to a full tank?

[@eljaibas16]

​@@joncamp9126Automatic Transmission Fluid ATF

[@mercamg9312]

@@joncamp9126 I believe ATF means Auto Transmission fluid.

[@StormgodStudios]

@@mercamg9312 Aviation Turbine Fuel

[@iknowlaa]

Just cleaned my Hyundai Coupe 2005 1.6 with your video guide. And the result is amazing, no more stuttering during low rpm & acceleration is noticebly better than before. I cleaned individual injector pulling out one by one, just a side note-i didnt manage to get the filter out/kinda hard so i skipped that part. One of my injector is almost totally blocked and been running like that for the pass 1yr. Happy to see the fine spray pattern after cleaning. The nylon fuel line is a nightmare to reinstall(no quickconnect), thanks to another you-tube guide on how to force the tubing with some heatgun/flaring tool's help. A million thanks to you Sir.

[@AliMECH]

Thanks for watching and your feedback, glad it was helpful and saved you money

[@mustangandfrankenstein]

I'll be doing it this week on my 06 caravan ..210000 miles on it ..do you have any advice ? It losks pretty simple .I'm getting terrible gas mileage like 14 miles to the gallon if that ..and I took all the stow and go seats out to save weight and pump tires up to 40 pounds but still bad gas mileage..runs good and mo codes just the dodge caravan.06 .ughhhh thank you ill let you know how it goes my friend

[@samus318]

@@mustangandfrankenstein Did you end up using this method and if so, did you notice any improvement? I’m getting terrible mileage in an 06 accord and am hoping to try the same this week

[@mustangandfrankenstein]

@@samus318 i haven't yet brother been so busy.but im going to it makes perfect sense and will help your car and mine either way .theyll be clean ..

[@RoxusRemo]

@@mustangandfrankenstein Done yet bro?

[@amirmohammadmohseni]

Thank you so much! It was so satisfying watching injectors while starting :) Very very nice & helpful.
Greetings from Iran 🇮🇷

[@AliMECH]

Thanks for watching, appreciate that ✌✌Iran ✌✌

[@chancecarlton8403]

That was really impressive. I've never seen them spray either, so cool.

[@AliMECH]

Thank you! Cheers!

[@niloyu105]

​@@AliMECHSir is this doable in Diesel engine thanks

[@cass71291]

Excellent video sir. I’ve never seen fuel injection in action to be honest. It was great to see the injectors firing in the firing order. I’m going to actually do this exact procedure on my 2003 Toyota matrix. Thank you again.

[@AliMECH]

Thanks, good luck with it 🙏🏻

[@TheDangy]

Did you try this on your Matrix yet? I think I am going to try this on my 2004 Matrix

[@stumpchump7014]

Wonder if it worked?
Do you have a follow up on your injection clening?

[@jimcruise9632]

@Skateboard P probably didn't work so hes gone🤦‍♂️

[@feitan8745]

The last shot with the injectors was just fantastic.

[@AliMECH]

Thanks

[@gilgitister]

Why didn't I discover this video before, this is actually what I have been looking for - the easy way. Thanks a lot brother. Your new subscriber from Pakistan. 👍

[@AliMECH]

Thanks brother, u have so many videos like this

[@Mralex22801]

if you don't turn off the gas pump, your car will burn out

[@rotfan77]

Nice work, Great video, especially good that you back up your claim by showing how it works outside the car.

[@AliMECH]

Thanks, appreciate that ✌🙏🏻🙏🏻

[@mikeroland9751]

My son picked up a 1986 Honda Accord 2 door hatchback yesterday. It turns over but does not try to fire up. We confirmed it has spark, and has fuel pressure. The gas sat for 3 years so we are going to drain the gas tank & put in new gas. Before we start it up, we are going to use your method to clean the injectors.
Thanks for the great video and technique. It's the best technique on CZcams I've seen and I watched a lot.

[@AliMECH]

Thanks Mike, keep me updated ✌🙏🏻🙏🏻

[@matrixsanz48]

Did it work?

[@BUSTRCHERRI]

It's a little late since you said you already turned it over with the old gas in the tank. Now that old gas is throughout the entire engine.

[@tastybrew]

Best idea i have seen so far

[@ShamileII]

Great video! I liked watching how the fuel injections actually worked and the spray pattern.

[@AliMECH]

Thanks for watching

[@gerryfimiani4504]

Outstanding job!! You explained the procedure perfectly. THANKS

[@AliMECH]

Thanks Garry, appreciate that

[@davidr.f6242]

Sweet thank you for sharing your knowledge with us this is definitely very helpful especially for a guy like me that I work on my cars because of dealer charges too much

[@AliMECH]

Thanks, glad it was helpful

[@harleyb-ham266]

Now that's a video. Great idea!!

[@AliMECH]

Thanks 🙏🏿🙏

[@lyndondeoreyes501]

d best among all i've watched so far...

[@AliMECH]

Thanks man ✌

[@frankdelucey2137]

I agree 😃

[@texasRoofDoctor]

Genius hack with using the glue to make a quick seal between hose and can straw.
Thank you for sharing, Brother.

[@AliMECH]

Thanks for watching, brother

[@Daniel_Antonio_Arellano782]

Nice job! I was laughing at the "There's two ways. My way or the highway" line...lol

[@AliMECH]

Thanks 😅

[@dw4940]

Genius! Was gonna pay a professional but will try your way. $150 us$ and $233 Canadian funds is what the shops charge where ive gone in both countries.

[@jasonyu1162]

I have to say, that's a stroke of a genius, my hats off to you sir. liked and subscribed.

[@AliMECH]

Thanks and welcome

[@BillSmith-ut5li]

Nice job I've seen similar videos using the hose and can with the straw. But I didn't see it where you don't have to take the injectors out. This way eliminates damaged injectors and seals. Thanks

[@MrOhyeahsayswho]

Now that is how you do a how to video!! Excellent work and many thanks.

[@AliMECH]

Thanks, appreciate that

[@xecophinhodiyer7797]

I have thought about this method but worrying to proceed until watching your vid. Thank you so much bro :)

[@AliMECH]

You welcome bro

[@craigiefconcert6493]

Thanks for making this video!!! I will try it!
I was just wondering today why somebody doesn’t run the injectors outside the engine to see if it is effective to clean them. You did exactly that. I was thinking to have them cleaned but you just saved me a lot of money!
I bet that you also cleaned the intake valves nicely.
Actually, I wonder, if the engine is running well and not missing, no idling problems, then it would probably also work to add fuel treatment to the gas tank every so often

[@AliMECH]

Thanks for watching, here is another video like that, better quality, it will give u more information czcams.com/video/aDvtzg-ThZs/video.html

[@matthewtaveras745]

What cleaner is best to use?

[@AliMECH]

Carb cleaner

[@matthewtaveras745]

@@AliMECH thank you man. I got a check engine recently. Got code P0272, issues with the 4th cylinder and research says it could be clogged or partially clogged fuel injector. I also did change my fuel injectors earlier in the year in April but I got a job that has had me put a boatload of miles on my car since then. The car is a Hyundai Elantra, 2013 and in the last few weeks three times stopped accelerating while I was driving and then accelerating again after pulling over waiting and a moment. I recently changed transmission fluid and checked it to be safe, oil is changed regularly, I cleaned my throttle body which was not as dirty as I thought it would be, spark plugs are recent, ignition coils are recent and battery and alternator are new. I Was gonna just replace the injector on cylinder 4 til I saw this video. To be fair I ordered the fuel injectors cheap on Amazon because I can’t make money grow on trees. If it doesn’t work I will be pretty stumped, but it can only help.

[@AliMECH]

Thanks, hope my video helps u, I have so many videos about cleaning fuel injectors, the might be helpful for u too

[@roadstar499]

Did this other day...I was able to use almost a full can before I had to stop do to carb cleaner leaking all over the place..next time I will do a better job attaching connections etc.. 40 plus psi is a lot of pressure .seems to be best way to clean fuel injectors for me..cost me $4 for cleaner.

[@AliMECH]

Great job! It's easy and gives good results really but you need to be careful with fitting and not leak

[@roadstar499]

@@AliMECH most definitely! Next time I will do it better..carb cleaner in the face is not much fun...

[@johndooley8837]

Excellent demonstration. Thank you!

[@AliMECH]

Glad you enjoyed it!

[@echinedu1777]

I'll try this procedure on my Toyota Corolla. I pray it works. God bless u.

[@matrixsanz48]

e chinedu did it worked?

[@troyscinema]

Did it work?

[@matrixsanz48]

I tried it. I’m not a mechanic but it seems like it did some cleaning. Not sure it worked 100 %. I saw a change though. Also, was hard to create the adapter, I used a glue gun and when spraying the liquid goes back thru the adapter and was spilling out so I pushed hard on cap created with glue gun material surrounding the hose adapter tip and continued to spray even with spill going and finally got car to turn on for hmm 4-8sec then turned off, I finished the whole can. So not sure it worked only because it seems my Lincoln MKX needs spark plugs replacement soon. So not sure of fix 100%. But it does clean if you think thru it. Carb cleaner goes thru injectors. Also for my suv, I didn’t take back seats off, I made a hole on carpet under those rear seats to get to fuel pump. Worked fine as I cut a line in a way I can lay down carpet again.

[@troyscinema]

@@matrixsanz48 thanks for the feedback 👌🏾

[@les536]

This is the best video I seen on this...wow thanks😁😁😁😁

[@AliMECH]

Thanks ✌

[@catchaser52]

I have watched a Few Videos on this, with same method. This video is the best .

[@AliMECH]

Glad you liked it

[@vcutDIY]

You're amazing person, talented, thanks for helping me saving money

[@AliMECH]

Happy to help! Thanks for watching

[@darrinfaulkner8911]

Great video and demonstration as well.I am in the process of cleaning my fuel injectors out as well.Thank you for this!

[@AliMECH]

Thanks, good luck 🙏🏻

[@kaiberry5502]

Did it work for u

[@TheSecrecyOfFrequency]

Love this video thanks removing the rail to prove it.

[@AliMECH]

Glad it helped

[@fkrkrkgnf]

Thank you for sharing this info, I am going try this on my 96 Ford Explorer🙂

[@AliMECH]

Thanks for watching

[@joeh690]

Interesting video. Never knew how injectors actually worked.

[@AliMECH]

Thank you!

[@LachlanxSwazey]

You’re an absolute legend mate

[@AliMECH]

Thanks brother 🙏🏻

[@gman000]

Thanks for this 🙂 All the way from Cape town SA

[@AliMECH]

Thanks for watching!

[@jwgmarine4314]

Dude amazing - wow! Thank you - This is outstanding. I love the humor too! Great stuff you saved me hundreds of dollars.

[@AliMECH]

Thanks man, glad it saved you money 🙏🏻🙏🏻

[@priyajaan702]

Amazing work brother keep it love from Pakistan 🇵🇰

[@cayrick]

Nice! Well done. Thanks!

[@AliMECH]

Thanks

[@okaforabelisco9515]

Thanks easy way your friend from Nigeria

[@AliMECH]

Thanks for watching

[@Vanguardkl]

Nice . Subscribed. Hi from Malaysia

[@AliMECH]

Hello Malaysians ✌✌🙏🏻

[@PoeSturgis]

Super dope yo...this will save anybody hundreds of dollars from taking it to a shop

[@seeratamin8550]

Very simple easy and cheap method to clean your injectors frequently and thus save money on gas and environment

[@AliMECH]

Thanks for watching, glad it was helpful

[@photographerswithoutborder7302]

Absolutely perfect technique to work at the car thank you AliMECH 🖐

[@AliMECH]

Thanks for watching

[@tehpanuychikon168]

Nice video! Just what I was looking for 👍
Greetings from Mexico

[@AliMECH]

Thanks for watching

[@dip-qo2hf]

Wow the best and the easiest way to clean the injector. Thanks bro for sharing your experience. 👍

[@AliMECH]

Thanks for watching bro, hope it was helpful

[@blackton3]

I love this. Thank you, man really helped.

[@AliMECH]

Glad it helped!

[@JH-lo9ut]

I'm putting a lot of hope into this method to work. Let's see in a couple of days...

[@rafaelbetancourt3551]

Man You Rock!! good stuff, this was a very nice and doable injector cleaner hack. 👍

[@AliMECH]

Thanks man, glad you liked 👍

[@omarG19100]

im so doing this huh. thanks alot man.. I have some run rite fuel cleaner in a aerosol can at home. cant wait now.

[@AliMECH]

Awesome 👌

[@graceketegu7090]

Will be trying this on my chrysler gran voyager 2008 fingers cross I trust thi method 100 percent an it very imple

[@sambryant8646]

3 months ago, thought i left a comment. "Thank You" for making these videos. Cleaning the fuel injectors and cleaning PCV valve. Both videos help make a big difference how my car is running now.

[@AliMECH]

Thanks for watching and supporting 🙏🏻🙏🏻

[@BillSW]

which spray best to clean pcv?

[@regiodemty6122]

Easiest explanation ever ,I’ll try it soon ,

[@AliMECH]

Thanks, good luck

[@firdausravindar977]

What a great video. Thanks.

[@maxcallicott2599]

genius idea and an excellent video!

[@AliMECH]

Thanks, glad it helped you

[@arielsalcedocahoy5020]

thanks for giving idea and i will try it to my old car

[@AliMECH]

That's great

[@stanbecker2444]

Guy knows his stuff.

[@AliMECH]

✌️

[@stk57thst]

Hey! You are SUPER for this idea. Thank you.

[@abrarabid1706]

Thanks brother need more videos like these🙂🥰

[@AliMECH]

You welcome, I will 🙏🏻🙏🏻

[@MEGAPARTY140]

Wow great video simple explanation makes anyone try it with their car thanks 🙏

[@AliMECH]

Thanks for watching!

[@milissawhitney8712]

Your a life saver thanks you so much for the super helpful tip

[@AliMECH]

Thanks for your feedback, glad it helped you

[@orinyellowhair8278]

OMG ... I KNOW NOTHING ABOUT DIRECT CLEANING OF ENGINE PARTS🤔🙄 UGH ... I GOT SO MUCH TO LEARN AND YOUR VIDEO DEMONSTRATIONS ARE VERY INFORMATIVE AND INTERESTING ...

[@turboloverxo]

Saved me a lot of money, thanks a lot 🙏🙏

[@AliMECH]

Glad it helped!

[@BigStreams_]

That was satisfying to watch

[@kendrickynanflores4058]

EZ to understand mate. BIG THANKS!

[@nomadsteve5297]

Excellent video, thanks so much for posting this 👍

[@AliMECH]

Thanks for watching 🙏🏻

[@readmycomment4696]

Amazing video like many mentioned even I haven't seen fuel injector in action, you explain it really well thank you

[@AliMECH]

Thanks for watching, I have many videos about fuel injection cleaning, if you like to see more

[@OldSchoolNoe]

great footage of he injectors firing!

[@AliMECH]

Thanks for watching

[@TStheDeplorable]

Fantastic! Thank you!

[@peterswanepoel2807]

Very clever and usefull information THANK YOU

[@AliMECH]

Thanks for watching

[@mercamg9312]

Nice Video. great shots and explanation.

[@AliMECH]

Thanks for watching

[@user-dc7sv1ib3v]

thank you very good video

[@AliMECH]

Thanks for watching

[@tm5346]

Always do clever /cool stuff on mini ! Thanks again

[@AliMECH]

Thanks 👌👌

[@RonD1217]

Im a try this

[@MrJgd888]

You are genius!!

[@AliMECH]

Thanks

[@DOOM3DGUY]

Thank you very much. Easy no nonsense. Worked perfectly.

[@AliMECH]

Thanks for your feedback

[@richardsledgecock2110]

Your th man lol.you just helped untold numbers of people😁

[@DougHinVA]

Pronounced accent, but he is clear on instructions and it is not hard to do if you take your time and be careful

[@AliMECH]

Thanks 🙏

[@mubafaw]

Thanks alot. Much respect 🙏

[@monirkhalili5999]

OMG, just did the same with my cadillac srx 2009 with misfire and low rpm vibration and now everything is working perfectly

[@AliMECH]

Thats awesome, great job

[@mikmik4205]

Ok i tried this today and unable to start the car when connected the cleaner with fuel line not sure the reason
I have 3 efi fuse 20 a 7.5a and 10a
Engine is 1nrfe
I hAve taken out the fuel fuses

[@mikan4216]

Why 3 fuses

[@roadsidecarcare]

I will definitely be putting this to the test cause I've done my spare plug wires, new spare plugs and still have a misfire on cylinder 5 even tho it's a 2003 town and country.. It is my work van I'll comment again

[@rorywynhoff1549]

Thank you, just what I needed.

[@AliMECH]

Glad it helped!

[@ZonunLibra]

This channel deserve a Sub...... Good job

[@AliMECH]

Thanks for the sub! Appreciate that

[@frenchiefamily6352]

I will try this. Just find out my PVC valve is bad.. I think it have been a few months.. so a good injector cleaner will be good..

[@AbdulSamad-mo5xs]

Excellent ❤

[@AliMECH]

Glad you like it!

[@Mghanabro]

Hi I removed the EFI Fuse 2 which is 20A but car didnt start on carb cleaner car is nsp120 toyota not sure why it didnt start is there any other fuse not this one but this one state gasoline and after taking this fuse out the gasoline didnt pump out so I believe this is correct fuse for gasoline but car didnt start it was cranking

[@BennyBestt]

Pressurise it a bit more

[@jamesnicholls8601]

Splendid post sir. Well done.

[@AliMECH]

Many thanks!

[@alfredomorales7877]

it's worth it this video good mechanic

[@AliMECH]

thanks

[@nitolitz6759]

The best idea.thanks for this great video.

[@AliMECH]

Glad you liked it!

[@aaofik84]

wow..finaly i found how to clean

[@AliMECH]

Thanks, yes its the easiest way

[@simonjames2958]

What the hell... That was brilliant.... would that work for a 2002 Rover 75 cdti .... it uses the BMW 2 litre common rail Diesel engine.... put it 320d 520d - I don’t know common rail means all injectors come OUT on rail 🤯 btw just Subscribed NO ONE else on internet made cleaning injectors look so EASY (ish) I knew about engines in 80s but now it’s all plug 🔌 your computer 👩‍💻 ..... What’s a Computer???

[@AliMECH]

Thanks, I have so many video about cleaning fuel injectors, but this one only for gasoline engines

[@tm5346]

This video I’ve watch So Many times ! I love this! Thanks again & again........! Lol

[@AliMECH]

Thanks, glad you liked it

[@toy-sh5nr]

Can you repeat it with another car ...😍😍

[@AliMECH]

Yes I will

[@tm5346]

I’m watching again lol ha

[@AliMECH]

😅🙏🏻🙏🏻

[@wolfgangjorn77]

Thanks for your Videos!! Love to see a video for how to clean a throttel body on Cadillac XT 5

[@AliMECH]

Great suggestion!

[@ernestgunraj9916]

Awesome Video. I have a 2005 chevy express 5.3 V8 that was sitting for 7 years with gas in it and i was planning to remove both fuel rails this weekend to clean injectors, but it was looking like a lot of work - this seems way easier. I noticed that i have 2 lines, i guess 1 is a return line. Does it matter that the return line may take carb cleaner into the gas tank?

[@AliMECH]

Glad I could help, the carb cleaner can doesn't have that much pressure to open the return valve and lets it back to the fuel tank

[@BillSW]

Your videos are so detailed yet so brief to the point. You got major talent teaching us.
Could u do a video on removing injectors on a nissan rogue?

[@AliMECH]

Thanks, I will definitely do that if I have that car under my hand

[@michaeltkapele5031]

@@AliMECH some CZcams videos recommend removing injectors o-ring before flushing carb cleaners to protect them from being damaged. What do you say about that? Can this way of injectors cleaning apply to motorcycles?

[@AliMECH]

@@michaeltkapele5031 I have never seen any damage on o rings with carb cleaner, even if I remove them, I clean them with carb cleaner afterword

[@michaeltkapele5031]

@@AliMECH thanks

[@michaeltkapele5031]

@@AliMECH Thanks. Can I use this same technic on a motorcycle injectors?

[@seancokes3026]

Brilliant 👍🏾 Thank You

[@AliMECH]

You're very welcome