DIY Under Seat Organizer Build

In this part of my truck organization project, I build an under seat organizer for my 2007 GMC Sierra Duramax Truck. This is a great DIY project that can be done in an afternoon with pretty basic tools. I used plywood for my box but it could be made of MDF or other materials.
I made mine only cover part of the floor because I usually flip the seat up to haul my electronics needed for my work .
the dimensions for the box are:
Sides 17" x 7.5" sloping down to 4"
The front is 33" x 7.5 "
I used 1/2 inch plywood so the overall depth of the box is 17.5 if you use a different thickness of of wood you may have to adjust for it if you want the same dimensions.
Materials:
1/2" sanded plywood
5-6 oz veg tanned leather
#16 7/16 upholstery nails
mahogany stain
clear coat
5/16 Threaded Rod
5/16 Washers
5/16 Jam Nuts
5/16 Cap Nuts
1 1/4" Wood Screws
Tools used:
Table Saw
Jigsaw
Drill
Impact Driver
Drill bits
Razor knife
Leather Stylus
Hammer
Thanks for watching!
Music:
Horses to Water by Topher Mohr and Alex Elena from CZcams Audio Library · bit.ly/32TUZyy
Hey Sailor by Letter Box from CZcams Audio Library · bit.ly/32TUZyy​

[@mingohernandez6475]

Thanks gave me some ideas for my sierra

[@tomhiers9025]

Very glad I found this video I have plenty of wood in my little shop for this I will build one

[@Kllacam19k]

Wow, this looks amazing! Thank you for posting this, I am planning to make one of my own and this was the extra bit of motivation needed!

[@SagebrushSoulAE]

Thank you so much for watching! After several months of using it was just what I needed. Best of luck to ya!

[@DgkSilentMode]

Came out really good

[@SagebrushSoulAE]

Thanks! pretty simple and fun. Thanks for watching!

[@luisororosco1]

thank you!!!! planning to make one with a middle gap for a single under seat slim subwoofer in the middle, mix of a bit of bass and storage, I cannot see that in the market

[@Randy-no5mi]

WOW that is nice! Good job!

[@itsm.e8946]

Lmao I love how much stuff you have in your back seat hilarious!

[@SagebrushSoulAE]

Right?! Thanks for watching!

[@tstorms68]

Nice!

[@SagebrushSoulAE]

Thanks!

[@losmoore3358]

Good job. Good video.

[@SagebrushSoulAE]

Thank you so much for watching!

[@crazycanuk4181]

Hey looks great! I’m thinking of doing the same just curious if you’ve noticed any rattling or movement or if there’s anything you do differently hind sight?

[@SagebrushSoulAE]

So far so good. No rattle just make sure there is slight contact with the underside of the seat and it should quietly stay put. Thanks for watching and commenting!

[@joelperez9301]

Cant figure it out how that ladder came out of the truck 🤣

[@SagebrushSoulAE]

Yeah, not how that wound up in there lol. Thanks for watching!