How to Remove and Replace Waterpump 5.7 Liter Toyota Tundra Sequoia
Vložit
- čas přidán 24. 08. 2024
- Check out Sartin Garage Storefront
BEST DEALS
www.amazon.com...
How to Remove and Replace Water Pump on 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Toyota Tundra Sequoia 5.7 Liter Engine. #toyota #tundra #sequoia
Storefront
www.amazon.com...
FOR GREAT DEALS AND COOL PRODUCTS
Consider Joining these Facebook Groups
Briggs and Stratton
www.facebook.c...
Kohler
www.facebook.c...
Kawasaki
www.facebook.c...
Toyota Tundra Parts Tools & Accessories
www.facebook.c...
Parts Links Below
Waterpump amzn.to/41sAwPU
Thermostat Assembly amzn.to/3XMxwdT
Upper Radiator Hose amzn.to/3CRsViQ
Lower Radiator Hose amzn.to/3pu2bS8
Tensioner amzn.to/3Z9kpET
Small Idler Pulley amzn.to/3XQ93oi
Serpentine Belt w/ AC amzn.to/3keiu39
Zerex 50/50 Antifreeze amzn.to/46r3XUH
5 pack Toyota Genuine Oil Filter
amzn.to/49wJEpS
Play by play videos are awesome! Thank you!
Great video Mr Sartin - the best video and concise explanation I have ever viewed on You Tube and I am a retired ASI certified mechanic 82 years old. Again many thanks for your expertise.
Thank you for this. I was about to have a breakdown, my new to me tundra just started to overheat and I hope it’s not the heads. So I’m going to try this 1st
Thanks for this video! I am getting ready to replace mine and your detailed steps will make this a breeze!
Thanks for the tutorial. Now I know what I'm in for. I've always owned 80's Chevy's. God do I miss the simplicity.
I know what you mean, but by today’s standards this is simplicity, and there is some room under the hood and actual access.
Thank you... I know this is gonna take me some time, but I refuse to pay 1500 at the dealership..
@freedom8gemini2
I don't blame you
All the Parts I have listed in Description are the exact original Parts as long as they have not been changed before with aftermarket.
Take your time and Good Luck
Thanks dear Brother for sharing this video, God Almighty richly bless you, please keep it up
Great instructional video. IMO it is easier to remove the radiator to do this job so you can go straight through the front of the radiator support.
Thank you for this video. It really helped me out a lot. Keep making them. .
Thanks for the video. Only one thing is fyi, you don't have to put a gasket maker on the bols. The gasket maker that was there if from the timing cover when they installed it.
Thanks for this video!
Looks like a lot more work than I was hoping for.
Just had my truck in the dealer for oil change, rotate, and brake fluid flush.
They won't do the brake flush because I recently (3 times over a week) had my brake pedal go to the floor and grab at the bottom.
They claim flushing the very old air-filled brake fluid (That likely cased my dead pedal issue) may make things worse and they don't want to be on the hook for it failing....
I researched this dead pedal issue, and it may be a vaporized water air pocket stuck in the ABS/Proportioning valve system.
I did the "drive down a dirt road and trigger the ABS system dozens of times fix" and after 4 days so far so good.....
But I wanted to get that old bad fluid out to be sure.
This is VERY frustrating they won't change the fluid!
Now the problem will only get worse!
They also said my water pump is leaking and needs to be replaced!
They want $850 to do this job which includes 2 gallows of coolant but not a coolant flush.
Does that seem like a fair price?
I was hoping I could do the job myself, but this is too much work for me to do outside on the ground in the dirt in the hot SC summer sun and humidity.
There goes my boat fund :(
I can't believe my truck let me down like this at 95k miles.
It's a clean well kept 2014 1794 edition.
I bought it at 53k 3.5 years ago and already it needs this, and my Master Cylinder is seeping also!
That's another $900 repair job and none are available due to national backorder!
My 1998 4Runner went 200k to 300k with no failures of anything while I owned it.
I'm SO pissed at my baby right now :(
Hey I had the pedal issue on a 07 tundra. Most ppl blame it on master cylinder but it’s actually the front double piston calipers. We had done all kinds of things before we figured it out. That’s what my problem was anyways. Good luck.
looks like you have a leak in your radiator as well. great video
Thanks!!!
Will be getting at it thanks to your video
Did mine today. Great video! Thank you
Thanks for the vid. Imma have to get mine done soon the pump is about out
Great video this is going to help a lot when I go to replace mine thanks
Thanks for the video! Just got mine done!
Thanks for the detailed video !!
Doing mine now on my 2011 crewmax 5.7. Its been leaking for about 6 months and it warmed up for a few days before getting cold for the winter upcoming. Im a Toyota tech but havent done one of these yet. Pumps almost out!
You in Jersey by chance? Looking for a Toyota tech to do mine lol
@CJ-nk1ls
I'm a long ways from Jersey...lol
Dude.. your video is amazing my friend.
Is removing the tensioner necessary?
@coolbrezze2052
You don't have to take it off
Other than for a bit more space to work
I took mine off mainly to replace Idler Pulley on Tensioner.
How many gallons of antifreeze you use?
I'm pretty sure it was 2 gallons
One Gallon of Concentrate mixed to 2 gallons for 50/50 mixture
Did you replace the thermostat? I must have missed it in the video.
I didn't replace thermostat. But link is in Description if you want to replace yours.
It's been almost a year and all is good
Do you remember your total time on the job?
@jettyDeke
It took me alot longer than it normally would have from taking Video. I think it was most of the day just recording the Video.
But I would say not recording Video 2 to 3 hours. Just a rough guess.
Great video...Well done!
PITA!!!! No wonder damn dealers poke you in the behind for labor charge. I could do this job myself, wont be easy, but only be out of pocket for the pump, no labor.
Good video sr 😮
Good job, thanks for sharing this video, keep it up
Great video thanks
How many miles did your water pump last before replacing?
232k you answered my question I believe
Awesome video!!!!
Thanks.
great video! it really helped me. Thank you!
Is it suppose to leak threw weep hole?
No it shouldn't be leaking.
When I fails, it will typically leak out the weep hole. But it shouldn’t leak at all when everything is working correctly.
Why not remove the radiator for more room?
You can
Looks great. Did you happen to use gasket maker also? Or was the cover/gasket enough?
Only thing I used gasket maker on is the bolt threads. The waterpump that I used comes with a metal type gasket. I wouldn't recommend putting gasket maker on it.
The Pump I used is factory replacement part. It is not aftermarket.
Im shocked to see a waterpump job on my tundra is WORSE than my bmw....
🙏
❤❤❤❤❤❤❤