Firmware for Benbox. Changing firmware to LaserGRBL and vice versa.
Vložit
- čas přidán 13. 09. 2024
- How to change your firmware from Benbox on your Eleksmaker Mana board into GRBL (LaserGRBL) frimware and vice versa.
Was made by George I Fomitchev
CEO and founder of Endurance lasers
/ reangeorge
/ george.fomitchev
skype: george.fomitchev
+1.239.302.0053
+7.916.225.4302 (Whatsapp, viber)
EnduranceLasers...
Endurance-lase...
Thank you for all.
My questions solved.
Excellent!
Nice Thank you very much ;)
Make a video with the three types from eleksmaker the nano, mana, and mana se. Also explain the diodes with extra wires.
the nano is the adruino card (the part you plug into your computer) that controls the mana or mana se cards. there are other boards that control a laser engraver but most are adruino based.
I did not notice any extra diodes. it looks like the wires are longer than normal, but they seem to do the job.
check this site it has some information on laser engravers( I found this site on the net, I have NOTHING to do with the site)
www.hackster.io/rgrokett/benbox-with-eleks-laser-engraver-gearbest-banggood-20ef0e
Hi there. I think I have uploaded a firmware onto my eleksmaker pro a3 and now it is not working. How can I return it back to the original? My xloader keeps saying upload failed. Can you help??
Can we use own handwriting font style for 2 d pen plotter cnc machine in BENBOX
Can you post the parameters that need to be changed in the description of the video?
It is hard to read them off the screen. Thanks.
ok, will add on site
hello i did this now my laser will light up in lasergrbl but my stepper motors do not move any idea why
ok so now bought new control board and the problem is opposite laser do not work but stepper motors do, at this point i want to glue the 2 boards together. any advice my friend
i cant find the hex file you are uploading not for GBRL or benbox
I’ve stated in another post( I’m no good with computers ( hammers + nails guy) but I found information on (wiki how ) try that - it states about doing this and that like turning off your Firewall ect . All want to know is ( is this software safe )
Good luck
Try wiki how it as lot’s of info on this brand of machine. From Liverpool 🇬🇧
endurancelasers.com/download-center-lasers/
Heeee hello guy's a nice video with good information but I have a strange problem my laser that works with benbox can only burn on full power even when I push low light button it will burn on full power if I change the intesity setting to 25 for engrave a picture the laser will also burn on full power maby you can tell me where I can find the right .hex file I'm busy with the laser for four day's it makes me crazy hope you can help me thanks 👍🏻
thank you and more about GRBL endurancelasers.com/an-important-things-you-need-to-know-about-grbl-firmware/
Have done this exactly as you have done on this video three times and it's still bit responding... Very frustrating, Any Help?
Try wiki how!
es posible que nos comparta los firmware de benbox por favor, muchas gracias
where did you get a manual? I could never find a benbox manual even on the benbox site.
also could you post a link to the manual in PDF? please
I found some detailed information on (wiki how) I’m no computer minded person and I found it a bit complicated to be honest but for you it could be a breez ( easy) I’m old school hammer + nails guy who wants to get into laser engraving and thinking it looks easy I’m now stuck with a K40 with a few mod’s for safety and the same model in this video. I’ll to ask the wife for help.
Good luck! From Liverpool 🇬🇧
endurancelasers.com/an-important-things-you-need-to-know-about-grbl-firmware/
is my TOPQSC laser compatible with Laser GBRL?
how did you get the 2 wire laser working on a 3 wire plug? also how do get GRBL 1.1.hex to work with a controller card that only has a 2 wire laser hook up?
I assume that 3 wires are only needed to continously power the cooling fan, and have 1 wire that turns the laser on/off as PWM. But with 2 wires, you can have PWM as well. The downside is that the fan also is controlled in exactly the same way. So 10% powering the laser with PWM probably stalls the fan.
@@xDevoneyx I ended up buying a PWM to TTL converter. it cost about $10 on banggood.com. and i mostly figured out how to get GRBL working.
Здравствуйте а как вы подключили лазер просто у меня лазер на 300 мВт а там токо провод + и -
нужен обязательно PWM
sir i want GRBL HOW TO purchase
What is an xloader?
on our site, EnduranceLasers.com
Hi everyone, I ask if anyone knows how to help me, I received a LC400 Pro 50W laser engraver today, I assembled it and then I did the FIRWMARE update procedure as it was indicated in the manual, I selected as indicated the custom firmware, but now the laser does not move properly as it did before the update, right and left are inverted, back and forth it moves badly ("wobbiling"), the maximum speed decreased compared to before and no longer detects the limit switch micro .. . In short I can't use it.
I tried to program the other 2 firmware called originally, but the difference is minimal and the problems more or less the same.
Is there anyone who is able to help me or maybe it has the same model as an engraver and you would send me the firmware? It's all in metal, 40x40 work area, black with blue feet, taken on offer on Tomtop
Online I tried to look for it but I found nothing, thanks in advance
I am few day ago buy. ( laser master 2 Engraver ) buy 1 day after check in the laser printer. did not work so please give me a Salutation so let me give us a Reply
Waiting for your reply
'' Laser GRBL detected some problem with your board! '' this is short is my show. To computer
@@hnmsajith7971 you may have a bad board or the drivers are wrong.
Can you share this firmware?
You want firmware for eleksmaker, benbox or Grbl laser?
it is in our download center endurancelasers.com/download-center-lasers/