ABS Light On Audi A3 And VW Golf - Caused By Fault Code 01130
Vložit
- čas přidán 11. 07. 2024
- Audi A3 ABS light and ABS light on VW Golf, is extremely common which is caused by a faulty ABS pump and module. Failure of this unit will cause the constant illumination of the ABS warning light and will prevent full operation of the emergency braking system, leaving only standard braking in effect.
Commonly we see an extensive amount of these ABS units sent into us for rebuild for the following fault codes: 01130 - ABS Operation Implausible Signal, 16352 - Control Module Defective and 01276 - ABS Hydraulic Pump (V64).
Common Failure symptoms:
ABS light on
ESP light on / traction control light
No communication to the ABS module
No ABS assisted braking
Pump motor constantly running
www.ecutesting.com/common-fau... - Auta a dopravní prostředky
Thanks you sir
I found a power issue on my 09 Jetta. 12v not getting to the abs module because of a bad connection and corrosion in the fuse block under the hood.
Replaced fuse block, erased codes, 1 week later and all is well.
Hi mate my audi shows error 00597 do u have any idea what’s going wrong?
being that this seems to be a common failure with the abs module itself,
isn't it cheaper to disassemble the electronics module from the ABS pump itself and send just the module itself?
from my understanding the issue in 90% of the times these VAG ABS modules fail is bad soldering joints in the electronics module?
and lets say i find a new electronics module with the same exact part number as my own faulty one, wouldn't i be able to just swap the faulty module with the new working module? or that would still require re-coding the new electronics module?
You'd still have to re code it using VCDS or similar.
I have a Audi A3 sportback 2010/2010 with abs module defect.
Hi. i got a A3 sportback 2.0 2009 CBAB with the ABS, brake and esp lights on, using a OBD11, codes i got are 01276 and 01130, i''m trying to run the abs pump so i can test the power to it with multimeter. but it wont let me i just get this > (22) function cancelled, marginal condition have been met, what do i have to met to perform the test or is it because the pump is done for ?
Hi. Have you checked the relevant fuses that power the ABS? If these have checked out ok then unfortunatley it will be the ABS that is faulty. If you would like to get your unit re-built then please visit myaccount.ecutesting.com/ to get started. Any further questions please contact our technical support team via email at info@ecutesting.com and they will be happy to assist you. Thanks.
@@Ecutestinglimited i seen this maybe Audi will fix it for free ? Recall number R/2017/190
There are 38548 AUDI vehicles affected by the recall R/2017/190.
This recall was issued on June 20th, 2017 and all the details of this AUDI recall (R/2017/190 - ABS/ESC SYSTEM MAY FAIL) are provided bellow:
Recall reference
R/2017/190
Recall Type
Car
Recall Date
2017-06-20
Reason for concern
ABS/ESC SYSTEM MAY FAIL
Reason for recall
On vehicles with ABS/ESC the earth connection may be interrupted. This may cause failure of the ABS/ESC system.
Remedy
On affected vehicles install new software. Where necessary a new ABS/ESC control unit will be fitted.
How to check if the vehicle is recalled
Contact the local AUDI dealership or manufacturer. You will not need to pay for anything involving the recall.
How the manufacturer will repair
The Recalled vehicles will have the fixing checked and corrected as necessary by and official AUDI service.
AUDI Reference ID
45F5
Number of affected AUDI cars
38548
AUDI vehicles affected
Model VINs Dates
A3 2008-05-01
to 2009-05-31
Are you guys in the US too?
Hi Juan, we offer world wide service
Is this available in Pennsylvania .USA?
Hi. We are based in Derbyshire in the UK, but we do offer a worldwide service so you can send your unit into us no matter where you are located! Visit our website for more information: www.ecutesting.com/contact-us/
Do u guys offer lifetime warranty? And what if after u guys fix it i have abother error code? Do u fix it for free?
Hi. Yes, we offer an unlimited mileage lifetime warranty on all units we remanufacture, so if there is a fault with the unit later down the line we will re-build it free of charge (minus postage costs). Please visit our website for full details: www.ecutesting.com/lifetime-warranty/
Hi, your service looks great, what kind of price are we looking at present please?
Hi. Select your car model on our website here: www.ecutesting.com/common-faults/volkswagen/volkswagen-golf-audi-tt-and-a3-abs-pump-failure/ for an accurate price as it may vary depending on make/year/model. Thanks
Preciso recuperar meu módulo
Qual contato de vcs pra nós da andamento ??
Oi. Fornecemos apenas um serviço de reconstrução, não um serviço de remoção de módulos. No entanto, se você quiser entrar em contato conosco, envie um e-mail para info@ecutesting.com com o número da peça, marca e modelo do veículo e detalhes de sua falha. Obrigado
Are you in U.K.
Hi Mohammad. Yes we are based in Derbyshire in the UK. But we offer a worldwide service: www.ecutesting.com/contact-us/
Hi Sir I am Shrijeet from India, a senior technician of VW group cars, nowadays in India lot of ABS control modules are getting failure for VW cars like Audi, Skoda, and VW, so all these modules for replacing in dealerships is too expensive, so I want help from you to repair this module for me by sending your place, so guide me the sending procedure & repair cost of each module. And think this will be a long time business from us. Thanks pls reply on
Hi Shrijeet. You can either visit our website www.ecutesting.com and select the 'product catalogue' tab at the top, choose the make and model of car and finally the product (e.g. ABS unit) to view the prices for each module.
Or you can visit the common faults section of the website here: www.ecutesting.com/common-faults/volkswagen/volkswagen-golf-audi-tt-and-a3-abs-pump-failure/ to read more about the causes and our re-build procedure, as well as selecting the make and model of vehicle relevant to the unit you require re-building.
If you would prefer to speak to us regarding anything else, please don't hesitate to contact us via email at info@ecutesting.com, or via phone on +44 1773 535638. Thank you.
mine just failed. however if i start the car with brake pedal held, no faults show. Once i release the brake pedal: ABS, brake warning flashes, air bag warning and traction off comes on. I performed a code check of the ABS module and these codes do appear. Looks to me like a short for no brake pedal input inside the module. Checked all fuses side of dashboard and in the engine bay, no defects found.
What is your turn around time for repair??? Is there a facility in the states????
Hi. We are based in Derbyshire in the United Kingdom, however we do offer a worldwide service so you are welcome to send your unit into us for a re-build. Follow this link here: www.ecutesting.com/common-faults/volkswagen/volkswagen-golf-audi-tt-and-a3-abs-pump-failure/ and select your make and model of vehicle for the most up to date pricing and turn around times. Cheers.
Hey man I have the exact same symptoms as you regarding brake pedal held with no lights and release causes faults. What did you end up doing?
That's prohibitet.
I have error 01130,i can clear after pressing brake. Once release it come back...
IM CHECKING THE FUSE SAME PROBLEM SOMETIMES LIGHTS DISAPPEAR
@@jeivenkatesh8324 did you ever solve the issue? My 2010 GTI will throw the lights as soon as I release the brake pedal. Replaced all four wheel hubs/ABS rings and ABS sensors, checked brake fluid, and checked my fuses.
@@ytr_gilbo think you've ruled out everything bar the pump / module at that point surely? You ever get it sorted?
Where are you located?
Hi - we are based in Heanor, Derbyshire
@@Ecutestinglimited telephone number please
@@Ecutestinglimited my Vw golf mk6 is doing this problem abs fail mot today
Can we contact via email? I m from Serbia, I want ur service, is it possible?
Hi Stefan. We do offer a worldwide service so you should be able to send your unit into us. For any further questions check out our FAQ section on our website, or contact us via email at: info@ecutesting.com
Thanks
What the reason of the first fault? 01130
Hi. The cause of the fault code 01130 is typically an internal failure in the module of the ABS unit. If you would like to get your unit re-built then please follow this link: www.ecutesting.com/common-faults/volkswagen/volkswagen-golf-audi-tt-and-a3-abs-pump-failure/ and select your make and model of vehicle, then the part number which matches the one printed on your unit. If you cannot find your units part number on our website, then please email our technical support team on info@ecutesting.com and they will assist you further. Thanks.
@@Ecutestinglimited do you know that eror code 1130 is in ABS elektric block brain ?
Hola tienen alguien que hable español ?
Hi. Lo siento, no, no lo hacemos.
I have this problem, 01130, but i'm from Brazil :/
Conseguiu resolver mano?