DIY WHEELCHAIR RAMP - EASY AND CHEAP

Hey Guys! Today's video is a bit different. I hope someone finds it helpful, so please if you think someone would find it useful, SHARE IT WITH THEM!!! (Materials used, below.) I have been searching the internet for a ramp. To either make it or buy it on a budget. BUT after so long, not finding help and in desperate need of one, I decided to do something about it. I designed and build my own, as well as a platform. I also made a video in hopes it could be useful for someone out there. SO PLEASE SHARE!
For the platform:
cement blocks
a piece of 3/4 in plywood
we bought ours at home depot and had them cut it into a 23 inches by 46 inches rectangle
For the ramp:
We only used
2 2x8 3 ft long
1/2 inch plywood measuring 20x36 inches
I made it three inches wider than the wheelchairs width
a drill
1 and a half inch wood screws
and a drawer handle
comment down below if you have any questions or private message
Thanks for watching the video! Hope you enjoyed it.
Make sure to like the video, click subscribe to subscribe to our channel for more Neverending fun!
And don't forget to click on the notification button, the bell, to receive a notification every time we upload a new video.
You can also follow us at:
/ theneverendingkidshow
/ theneverendingkidshow
/ thenekidshow