Polaris 700/800 Engine Build on a Sportsman, Ranger and RZR! Part 1

Sdílet
Vložit
  • čas přidán 28. 07. 2024
  • I'll show you how to build a Polaris Ranger 700/800 Engine in detail from the ground up. Same engine on Sportsmans and RZR.
  • Jak na to + styl

Komentáře • 6

  • @axelchampagne9371
    @axelchampagne9371 Před 11 měsíci +2

    Just found your videos, and they rock! Thank you for taking the time to make these and sharing knowledge! I just purchased a 2004.5 sportsman 500 h.o and it runs amazing in low gear and bogs in high rpm in high gear. I havent done much to it yet but am curious if you may have come across that issue in the past and found a fix. Thanks in advance ! Cheers!

    • @TitaniummanGarage
      @TitaniummanGarage  Před 11 měsíci +1

      Thanks, Glad I could help.

    • @axelchampagne9371
      @axelchampagne9371 Před 11 měsíci

      @@TitaniummanGarage any idea about my 500 h.o that bogs in high range but not low ?

    • @TitaniummanGarage
      @TitaniummanGarage  Před 11 měsíci +1

      Yes. I have a couple. Thanks for watching. I would start by cleaning the carb and checking the fuel lines and pulse pump. I think you have a easy fix if I could see it.

  • @killslveslowly
    @killslveslowly Před 10 měsíci

    How did you put back in the Crank gear? Mine isn’t budging

    • @TitaniummanGarage
      @TitaniummanGarage  Před 10 měsíci

      I didn't have to pull mine off. They are pressed on with a press. When you separate the case halves it come out with it on the crank. On a 800 I rebuilt ,the new crank had the gear on it already.