Excellent, just what i was looking for. Can i ask doses high pressure fuel pump needs to be removed for head to come off? Also ,whats the torque settings for head bolts. My engine is 1.6tdci ,for engine code t1db. Did you get your cylinder head pressure tested and skimmed. Thank you
Hi we are having problems with our ford transit connect, with the timing settings the belt lost most of the teeth so we have checked the top end of the engine and that was fine except 2 rocker arms which we replaced all and we have set up the timing belt as you have and when we try to start it, it will not and we have noticed at the air filter it blows instead of sucking any advice cheers Dave 👍🏻
Hi, can i ask how long it took you roughly? wondering if its something i should get a garage to do or do at home (have done others but not this engine) thanks
Hallo, erstmal gute arbeit, habe das gleiche bei meinen grand picasso 1,6 hdi gemacht, alles soweit richtig nur springt der nicht an dreht nur. Muss ich den kraftstofffilter vorher füllen ? Gepumpt habe ich es scheint das der kein diesel bekommt hmm
Hi at 6.35 there are placed tiny orings between rockers how they are called what for and what is part number?Anybody knows? I will need to replace silicone under camshaft cover
@@the-senior-tech Can I get it seperately or is in head gasket set only? What is the size of the orings they are special one? Can I get ireplacement in any car parts shop?
Could you tell me, why you decided to remove head? I have the same car and engine, and it's eating some coolant with no leak outside :c That was worn head gasket in your engine too?
Nice job, detailed explanation thanks!
Hej. Po akcencie czuje ze PL. Spoko wideo. Wkoncu zrozumialem skad mam delikatny wyciek przy wtrysku.
Satisfying Job man! ✌️
Excellent, just what i was looking for.
Can i ask doses high pressure fuel pump needs to be removed for head to come off?
Also ,whats the torque settings for head bolts.
My engine is 1.6tdci ,for engine code t1db.
Did you get your cylinder head pressure tested and skimmed.
Thank you
Hi we are having problems with our ford transit connect, with the timing settings the belt lost most of the teeth so we have checked the top end of the engine and that was fine except 2 rocker arms which we replaced all and we have set up the timing belt as you have and when we try to start it, it will not and we have noticed at the air filter it blows instead of sucking any advice cheers Dave 👍🏻
Check camshaft. After valve-piston collision in these engines the lobes spun.
Hi, can i ask how long it took you roughly? wondering if its something i should get a garage to do or do at home (have done others but not this engine) thanks
Removing, cleaning and installing head around 12hr.
Hallo, erstmal gute arbeit, habe das gleiche bei meinen grand picasso 1,6 hdi gemacht, alles soweit richtig nur springt der nicht an dreht nur. Muss ich den kraftstofffilter vorher füllen ? Gepumpt habe ich es scheint das der kein diesel bekommt hmm
You need to bleed the system, ideally with a vac bleeder.
Hi at 6.35 there are placed tiny orings between rockers how they are called what for and what is part number?Anybody knows? I will need to replace silicone under camshaft cover
Hi, Part no 2S6Q-6L623-AA. They seal camshaft oil feeds.
@@the-senior-tech thank you very much
@@the-senior-tech Can I get it seperately or is in head gasket set only? What is the size of the orings they are special one? Can I get ireplacement in any car parts shop?
I used standard 6mm o-rings.
@@the-senior-tech THANK YOU
Could you tell me, why you decided to remove head? I have the same car and engine, and it's eating some coolant with no leak outside :c That was worn head gasket in your engine too?
Hi. It was pressurizing the cooling system and overheating the engine.
Tutorial detallado : czcams.com/video/805izH2Lflg/video.html