Complete Disassembly & Assembly of PURE D8.2 Silence PD82-4MB Electrolux Vacuum Cleaner
Vložit
- čas přidán 30. 10. 2023
- Whole process of how to disassemble & assemble vacuum cleaner Electrolux Pure D8.2 PD82-4MB. Motor is clogged with dirt - how to open PureD8 vacuum cleaner to clean it. Motor replacement video. Vacuuming without a s-bag caused this clogging of the entire vacuum cleaner - never vacuum without bag or with an unsuitable bag (always use original s-bag).
www.proexservis.sk/ponuka/ser...
www.proex.sk/
#diy #repair #motor #cleaning #assembly #disassembly #vacuumcleaner #electrolux #replacement - Jak na to + styl
Video parfaite merci beaucoup
Without this video, I would not have been able to disasseble my AEG vacuum cleaner. Thanks!
You are welcome 😎👍 what was problem, faulty?
The cable rewinds automatically, the brake is not working properly. I cleaned it, but it didn't help. I am using a clothes peg to stop the cable from rewinding now😅
You can remove that rubber wheel from cable reel and glue it surface so it will stuck there when it should
Interesting! So you think if I pretend the rubber wheel from turning, by glueing it, the brake will work again?
Yes, because it should hold that reel in place, wheel should not spins, that metal rod doesnt hold it and it spins like a wheel. That brake doesnt work because of that.
Thx! It was a big help. It would have been impossible without the video
Thanks you helped me alot!
These are nice machines. Just bought one (AEG branded) and good to know how it can be repaired. Even though I was given a 5 year warranty.
Дякую тобі, добрий чоловік. Мав проблему - інколи вимикався пилосос. Передивився кілька твоіх відео. Зрозумів що проблема в платі. Точніше в конденсаторі 474. Паяльник у мене є, але паяти я не вмію. Тому вирішив купити нову плату. Обдзвонив усі сервісні центри Electrolux в Украіні, такоі плати ніде немає. Треба замовляти і чекати 30 днів, коштує 34$. Я не хотів чекати. Я поіхав на радіоринок, купив конденсатор 474К Х2 за 0.2$. Подивився в youtube як паяти. Перепаяв конденсатор за 10 хвилин. Все працює.
Дякую тобі, добрий чоловік!
Thank you, I'm glad that video helped you and top of that you also learned how to solder 😎👍 sometimes, maybe in 1 of 10 cases pcb board is totally dead and vacuum cleaner doesnt start at all, so replacing capacitor doesnt help, but it cost a try, like in your case 🥳
You forgot to replace the black foam on the engine...
Maybe not, maybe I wanted to make it 1db(A) louder to punish customer… *evil laugh* 🤫
…but without glue, it wouldnt hold there
@@proexservis I'm fixing my mom's cleaner, what kind of glue would fit? I have neoprene...
It should hold, any adhesive spray glue or some epoxy glue, Gorilla glue could be good choice too, foam to metal 🤔
I got water in mine...and it stopped working.
Is it any idea to try and repair it?
Hi, probably motor is dead, disassemble it and measure contacts of motor on pcb board
@@proexservis I took the engine apart...used some spray.
But then a small plastic part with connectors fell out 😁
And I dont know where it should be placed. You dont happen to have a picture of the engine open? 😁
No, I dont have this motor apart at now or picture of it. Try to google part number 140075168041
Those connectors are visible from outside
@@proexservis I got it togheter, but still same problem. The red light comes on for 0,5 seconds...then nothing.
When I pull out the cord it comes back on...and slowly fades. I guess its best to buy a new one?
@truckdriver1982 did you measure resistance of motor?
42:22-42:55 is it hurt when u suck your hand for a long time ?😬
🤣 SMART function didnt react, so I punished it by sucking my hand little more… and more 🫣 until it reacted, so no vacuum cleaner was harmed 🤌🥲
I think the Ultrasilencer 1800 watt model has stronger suction. But that also makes a lot more noise.
The D8.2 / VX82 is really silent in comparison.
@@pizzablender yes, old vacuum cleaners have strong motors (most of them 1400W+), but since 2018 european vacuums can have max 850W motor, but with half (or 1/3) of motor power, there is only around 20/25% suction power loss in compare to old model (because of better technology with better use of suction power) +bonus, quieter vacuuming 🤫
@@proexservis Indeed the world is better... also the brushes and hose seem to be better than in the past. Wide passages, all sealed so no leaks, smarter design.