How to replace vacuum cleaner motor - Electrolux 600 (ES62) | Pure Q9 (PQ9)

Disassembling of Electrolux Pure Q9 PQ92-ALGS self-standing cordless handstick vacuum cleaner for Motor replacement or any other necessary repair / how to disassemble PureQ9 or Electrolux 600 (ES62) and replace damaged motor or other spare part.
Part number: 4055483277 or 140249213012
Original stick vacuum cleaner motor Electrolux 600 series ES62/AS62 (AEG 6000) and Pure Q9 PQ91/PQ92 (AEG QX9) also with motor electronics (PCB).
Suitable for models:
AEG
AS62A25ULT AS62A25UOT AS62AB25UG AS62AP25UG AS62B25GRN AS62B25OKO AS62CB25DH AS62CB25HI AS62CP25DB AS62HB25SH AS62HB25UV AS62P25WET QX9-1-40 QX9-1-40GG QX9-1-50IB QX9-1-ALRG QX9-1-ALRS QX9-1-ANIM QX9-1-ANIS QX9-1-OKO QX9-1-P4GG QX9-1-P5IB QX9-1-ULT QX9-1-ULTS QX9-1-UO
Electrolux
ES62A25ULT ES62AB25UG ES62B25GRN ES62CB25DH ES62CP25DB ES62HB25SH ES62HB25UV ES62P25WET PQ91-3BW PQ91-3EM PQ91-40GG PQ91-50MB PQ91-ALRGS PQ91-ALRGY PQ91-ANIMA PQ91-ANIMS PQ91-GREEN PQ91-P40GG PQ91-P50MB PQ92-2OGF PQ92-ALGS
Chapters:
0:00 Remove dust container, cover, filter
0:25 Back side (Torx10)
0:40 Motor side (Torx15)
1:02 Disassembling
2:40 Replacing motor
4:55 Assembling
proex.sk/produkt/motor-vysava...
www.proexservis.sk/nahradne-d...
www.proex.sk/
#diy #repair #battery #vacuumcleaner #electrolux #assembly #disassembly #motor #replacement

[@rashpalbhati]

Thanks for the replacement video, wasn't sure if the batteries and board came out without screws 😅, but seems just a border plate holding the battery housing in place 👍🏻
Btw what is the part number and capacity for the battery replacement?

[@proexservis]

You are welcome 👍
Which exact model do you have? PureQ models are 21.6V and 25.2V, new Electrolux 600 (ES62) is only 25.2V. PQ9 should have 2000-2100mAh

[@kahlid-ataya]

0:19 i bought a set of 8 of these bits with a length of 15 cm

[@proexservis]

Good purchase 👌😎 some screws in new appliances are hidden very deep

[@rashpalbhati]

Can the battery be disconnected easily from the green circuit chipboard? Can the 7-cell battery module be simply clicked in as a replacement without any soldering required?

[@proexservis]

Hi, yes, there are all plastic connectors, no soldering is needed. But be careful to not damage sensor connectors (those orange ones), easy to rip them off the board

[@kahlid-ataya]

for this type of vacuum cleaner you should have a frozen nerves 😂
it's really annoying to disassemble it

[@proexservis]

Plastic latches are our enemies 🤣

[@kahlid-ataya]

@@proexservis exactly 💯