how to upgrade toy cars, The steering is powered by a pulse.
Vložit
- čas přidán 11. 12. 2023
- This is remote control car. (AE86)
I will upgrade the motor, motor driver and receiver of this car
The steering is powered by a pulse.
The newly replaced motor will increase its performance.
Parts Link
Search AliExpress as follows
1. 1. esp32 c3 super mini
2. 2. TA6586
3. 3. FP130-CN-14160
The rear motor is missing the link.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🎈Song : 샛별 - skip a beat /
• ✨샛별 - skip a beat✨(Royalty Free Music)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ - Věda a technologie
This is the video with the most amount of views you got, I think you should focus more on modifying this toy car because there are many people who like these cheap little cars and want to upgrade them
Thank you for your opinion. It's a very helpful opinion for video production. I'll actively refer to it.
31k, that’s a pretty nice number of views. 50k and a 100k next?!
I'm happy that you watched more than I tried
Did almost same thing...only I use a micro servo for steering. For the motor I use a 30000RPM at 3volt motor (yes a 3 with 5 zero's). Electronics, the same as you use. An esp32 c3 and a l298n for motor driver...big fun with these cheap cars.. Remote also an esp32 c3 mounted in an old 27Mhz rc transmitter. connection via p2p wifi (read somwhere you use BT)
hei man, do you think you could give me some links or schematics on how to use them, I've started a build of my own with of the shelf parts but I would like to make a piece that will be more reliable
@@antonnicolae20 It's hard to explain. I'll show you what I'm making in more detail next time.
I’ve noticed that the steering motors in these cheaper RC cars, works by a pulse. On more expensive RC cars, the front wheels turn gradually to the left or right, along with the noise of the steering motor. I just found out about this on eBay, very early this morning. A Mockingbird slot car drag racing motor, which turns out 65000 RPM. This motor probably would get your cheap RC car going at least 70 MPH. I’d put 2️⃣-9-volt batteries in series, as an upgrade. You’d have to reconstruct the battery compartment of the car, as well as the motor. I think 🤔 that the steering motor would be okay 👍. Circuit boards in the car would be your next upgrade, because I think 🤔 the 18 volts, provided by the 2️⃣-9-volt batteries, would probably burn your circuit board 🆙. It would also shorten the life of the car’s original drive motor, and may possibly start your RC car on fire. Just subbed!! Your friend, Jeff.
Thank you for the good information
영상에서 교체한 모터는 전자파 간섭 방지기능이 있는 모터입니다. 아두이노 계열은 이 기능이 없는 모터를 사용하면 CPU가 다운되는 문제가 발생합니다.
와 이건 정말 멋지네요 So cool !
감사합니다 ^^
Can you do more modifications in this car? like proportional throttle and steering? What is I rewind the wire in the motor with a thicker wire?
I'm going to buy a similar vehicle, and try different renovations. Thank you for your comments.
I only change center drive shaft rear gear (it crack) just 1 tooth less than front, enough for counter steer.
use original gear. same tooth
Do you have a parts list for this? Like what motors and receivers you are using? thanks! :D
The steering motor used the body and magnets of the 3v motor, and the rotor used the rotor and carbon brush of the electromagnetic interference prevention motor.
The receiver is ESP32's Bluetooth method.
are you using the same controller with the new receiver or did you get a new controller for it?
See the video czcams.com/users/shortsybT9owen73A
May I know the purchase link for the receiver and motor driver? Do you use the original remote or replace it?
Do you know Arduino? I code and use Arduino program. CPU is ESP32c3. It receives data through Bluetooth and runs motor driver. Communication data is "RC,steer,throttle". Steer and throttle are from -255 to 255. Example) RC,0,255 This is neutral steering and maximum throttle.
I also make and use the controller with ESP32. It sometimes appears in other videos of me.
The parts were purchased from AliExpress.
Can you send me link of this products for upgrade?
Parts Link
Search AliExpress as follows
1. 1. esp32 c3 super mini
2. 2. TA6586
3. 3. FP130-CN-14160
The rear motor is missing the link.
Could you send me a link to these products?
Parts Link
Search AliExpress as follows
1. 1. esp32 c3 super mini
2. 2. TA6586
3. 3. FP130-CN-14160
The rear motor is missing the link.
@@motor5 thanks
Please give me original circuit information please❤❤❤
Thanks for watching.
I'm not ready to release the circuit information yet.
Can you please show how to make that receiver ??. Please
There are many ways to create a receiver.
Arduino, Arduino Nano, Arduino Pro Micro, ESP32,
There are ESP32C3 and so on. There are many types of motor drivers available.
The receiver of the video was made using ESP32C3 and TA6586 chips.
Buen video jna pregunta si tengo el transmisor no original del reseptor sera que puedo ponerlo con otro coche ayuda
I made and used the transmitter receiver myself.
I put it in various toy cars and use it.
@@motor5 But yes, what I'm asking you is possible, I mean, if I can put the transmitter from a different receiver with another one, that's what I was referring to.

Can I get the rc receiver link?
The receiver is made of ESP32 C3 super mini.
Receiver cannot be purchased.
Beli dimana itu
I buy most of them from AliExpress