Customizing the AE86 $25 Micro RC Drift Car
Vložit
- čas přidán 28. 07. 2024
- After doing a little overview and review of 2 low cost micro RC cars in a previous video, I decided to customize one of the cars with some paint and custom 3D printed wheels. This ended up being a very fun little project and I'm pleased with the finished result. I may do some further customizing to this car, so let my know if you have any ideas below in the comments.
Previous video: • $25 Micro RC Drift Car...
STL files: / customizing-ae86-50442703
Wheels can be purchased on Shapeways: www.shapeways.com/shops/make-...
Subscribe for more videos and follow us on social media for more frequent updates and extra content.
_________________________________________________________________
Make It RC Store: shop.makeitrc.com
Make It RC Merch: shop.makeitrc.com/collections...
Website: www.makeitrc.com
Patreon: / makeitrc
Facebook: / make-it-rc
Twitter: / make_it_rc
Instagram: / makeitrc
_________________________________________________________________
Music credits:
Twenty Twenty by CHRISRGMFB
chrisrgmfb.com
Promoted by Royalty Free Planet: royaltyfreeplanet.com
Creative Commons Attribution 3.0
bit.ly/RFP_CClicense
Nuclear Midnight by Vladmsorensen (Ft. Sheiko)
Vladmsorensen
vladm.bandcamp.com
Sheiko
shakerimd.bandcamp.com
Promoted by Royalty Free Planet: royaltyfreeplanet.com
Creative Commons Attribution 3.0
bit.ly/RFP_CClicense - Auta a dopravní prostředky
Thanks everyone for watching! Hope you all are having a great weekend. Lots more content on the way so stay tuned. 👍
nice car, you shold tune a sturmkind dr!ft car
make it a hobby grade car
@@mftuning2891 lol
What software did you use for blueprints?
Upgrade to proposal.pless😅
I love these vids. And all of your projects. U should also try and swap out the electronics. And put some hobby grade stuff in
Damn that turned out nice! Maybe add a tail pipe but personally I love how clean it looks as is.
Hell yes, it looks so bad ass man! I definitely think you should paint the Ferrari as well.
Your wheel design is as mesmerizing as always
Definitely an improvement from base form. Only thing i would add besides exhaust would be scaled down decals of performance parts
Stance looks awesome. I'd definitely setup a 1/1 like this
Epic! You did a great job!
I think it looks great 👍. A bike rack with a bike and a tail pipe awesome. I love your great work 👍
Beautifully done!
Love the color, good work 👍
Looks absolutely awesome!!!!
Dude so sick!!!
I like how it measures from wheel center to wheel center, from front to back, thanks
Fantastic job as always
That looks so good!
I love the new look, and HEY, rubbin is racing!
Very good job
Love the look you created
Thank you for sharing this video 😊👌
Loving the Synthwave music. You have good taste.
YESSS a roof rack would look SICK!
This is dope af !!!
Really looks awesome
Great effort and superb video
I was thinking to buy one of these mini rc cars, but now you got me hooked! I will probably buy the same car and make it like the AE86 from Initial D
What this version if it called and where can I get one because I want to customize it
Beautiful job, now I know what to use my $25 Amazon gift card for, the clear finalized that chrome blue...
👍👍👍 l ♥️ it!
I can’t find it can you send the link
IT LOOKS SO FRESH
Damn fine work.
Those wheels are sick
Looks awesome!!!
Thank you!
Looks great
Holy shyte..that lil thing is ridiculous..that was a clutch move with color scheme for the wheels.and those wheels..good work as usual...
Bruh that’s sick
I love the build but there are a few AE86 specific details you should probably add. Like the tail lights are redlines so paint the little section above the taillights red, also things like turn signals and coloring the grille in like the Zenki AE86 front bumper. Those little details would really make your car pop!
Great work! 👍
Job well done sir 👍🏻
You make it sound so easy like the Bob Ross of RC cosmetics
YOU MADE A MASTERPIECE HOLY Y🥺😍😍😍
Nice car! 🔥🔝
Good job. Nice one!
I got one of these fun lil cars. A good upgrade wich makes it nice and peppy, i put a 7.4 volt battery. Doubles speed and no problems!
The wheels are actually very good i like them
Definitely put more than 25$ worth of work into it nice work
Amazing
Those rims look clean asf
U killed that project
Good job
Nice build! I think you should do something with Ferrari as well. Also painting the bumper in black + 6 /8 spoke wheels would be looking much better for ae86.
so good
Mod it with bearings and a servo holder so many can enjoy a budget friendly rc that is durable...thanks
I love your content..keep it up..i am a fan of your channel.
Got one today and I think I'm going to do the same and have it towed behind the scx24 c10.
Those wheels are 🥰😍😋🤩
Look's Sick
It looks amazing bro 9
awesome
I'd definitely be interested in seeing some added details. Maybe an opening hood or deleted hood with engine details...
Good stuff
Brother you the rc car perfect! :D
Nice mods!! You should mod the Ferrari to look like a clapped out drift missile with different colored panels and dents!! :D
That would be interesting. 👍
Looks alot better than stock
I would love to see you do a custom WLToys K969 project with a custom body etc, that'd be super cool !
Super cool video. You should make a 3D printed spoiler
GreT vid! New subscriber!
Wow it Looks realy good good Paintjob i Like it i have the Same modelcar and Made it to the Tofu Corolla Initial d
BADASS
Love it
This is the first vid I've seen of yours but I am about to check out more. I have been wanting to get regular plastic models but I bought an sg 1603 rtr and I am going to mess with it. I had a nitro Traxxas I think the tmax but I didn't have much luck keeping it running. I'm interested in painting, it seems like it can be rewarding in the end.
Welcome!
Ae86 is my favorite car
I got this rc car a while back and I'm going to paint it like the initial d ae86, I want to upgrade all of the internals too but it's going to be expensive
nice planning on doing this,but i think i will add a wing so it will look good
There’s another on Amazon for 10 bucks more with working exhaust that has a wing just to put it out there
What printing method did you use? Resin or filament based printing? I was looking for those kind of results.
Name of that RC car?
HB Toys 1:24 drift rc
How is the wheelbase on these? Close to accurate 1/24? Would love to give them a try and swap bodies with models if possible
Bro who ever calls that rice is dumb that's so clean 👍🏻👍🏻👍🏻
I like this
Hello how can i increase the steering angle from this little car?
What size was the hex if you don’t mind me asking? I’m thinking of building a few of these for my kids and I’m looking at wheel options
I have the first one they r so fun
I have questions re drifting. I would like to hear comments from everyone if you have experience and thoughts. I am trying to understand what primary elements are necessary to get an RC car to drift well. My suspicion is tires and traction are paramount, that is about all I would guess. But what about center of gravity, 2wd vs 4wd, steering throw speed and total throw? What I’m wanting to do is get a 2wd traxxas Slash to drift on low traction dirt. Just looking for insight, thanks for any thoughts.
fire wheels idc what anyone says!
hey love the video I just got one of these myself I want to get a bigger battery and have a better angle for turning would there be a kit that I could get to do that @Make It RC
Where did you buy this car? Love how it turned out
Would a Tamiya Plasma-Dash Motor be a great motor swap for this car? I recently bought it and I am curious to know if it would fit.
Bro what u used for protecting the paint and giving it that shiny look? I have the same AE86 and i started painting it but i want to cover and protect the paint to make it look shiny as yours
do you fink that i can put a new body on it ?
Damn it looks a lot better with wheels. I have the same rc, but got no access to 3d printer
what software did you use to design the wheels?
Can this rc car have a new independent reciever and a new transmitter
Hey.. Wht if you can tune another one but make it a back to the future themed kit car
does look great!
agree with you about appearance overall and scale criticism stuff both,
its minor and nit picky stuff anyway.
Hi I was wondering if you can try to use one of these just the chassis and electronics to fit under a 1/25 or 24 scale car kit like a Z28, mustang, or charger I think if it works that's better than buying a 3d printer
Can we get the stl on thingivers please i think they may fit my ldrc rx7 but im not sure?
I bought one just to see what I could do and I used model car kit wheels and tires which worked amazing and looked better I had some model car tires that was kinda more slick and harder then the more realistic softer rubber model car tires for drifting of course and it worked like a dread and looked good I put a false floor in it cut out all the windows and put some clear plastic in for windshield and I took a dash and some seat backs from model car kits part boxes and it turned out awesome just wish it could be more of a hobby grade car
That’s not rice at all! Very clean and simple.
Rather than painting the body, could I adapt a 1/24 scale model car body to fit this rc?
I’m trying to get into 3D printing, I see that you have a lot of experience with it. Could you recommend a decent but affordable printer? Note that I’m a teen who can not afford a crazy high end machine
U should get a ender 3
I want to buy one but can anyone tell me what the material of the chasis is? Plastic or metal? Thanks!
Do you haft Tao buy 4 wheels or do they come as a bulk
Is taking the body off necessary or more of a suggestion? I tried to take the body off but they seem to be stuck.
They are different ones? I only saw like 3 ones on amazon. Where dis u buy them or how are they called
The wheel design looks sick. I’m really bummed I don’t ha e a 3D printer