You are amazing... The instructions are free and it performs even better than 9398! Maybe I will build it in the December (just for snowy offroad). I prefer the combination of black and yellow
This is honestly one of the most amazing MOCs I've ever seen. Just wow. I run a lengthened Effermann's Ultimate 42099 Code Yellow chassis with custom extra low gearing and locked diffs. I'd love to build your MOC to compare the two!
So awesome!!! i just can't understand why you don't have way more subscribers/views. I mean your stuff is waayyy cooler than what I make!! I guess maybe it will just take some time for it to get more attention, but keep uploading and I'm sure you will get there! + the fact that you give free instructions for a lot of your builds!
Wyśmienity model, bardzo dzielny w terenie! Po tym mchu jeździł jak po dywanie w domu :) A z Mustangiem poradził sobie jak prawdziwy monster truck :) Mam kilka pytań: 1) Da się go zbudować bez buwizza, zamiast tego wykorzystać x2 PF receiver? Czy myślisz, że zabraknie miejsca? (jeszcze baterie...) 2) Czy po testach było widać jakieś zużycie na zębatkach? Na filmach słychać, że gdzieś tam jakieś zębatki przeskakują ;)
Dzięki! Co do pytań. Ad1) Nie próbowałem, ale patrząc na miejsce w środku stwierdzam, że spokojnie się da. Albo pojemnik na baterie pójdzie pionowo w miejsce buwizza (trzebaby wtedy przednią ramkę przesunąć o jeden stud do przodu i dograć piny) albo dać pojemnik na baterie na płask na tył, w miejsce instalacji N2O. Ad2) Nie ma żadnego zużycia na zębatkach, ten dźwięk co słychać to przeskakujące sprzęgło na małym siłowniku od sterowania ;)
@@Keymaker wow i actually made a crawler with diffs and it sucked 😭 , then replaced with no diffs and it was so much better... After I was on destination. Should've followed your advice lol
Yes, it works with Buwizz 3.0, because it has 2 PF ports and it is all you need. In case of switching between power and agile versions: it isn't done on the fly. You choose either power or agile version during building. If you prefer power version - just follow the instructions. But if you prefer agile version - then you need to build front axle twice, instead of building front and rear axle.
@@Keymaker Thanks for the quick response. I have Mud Thrasher 1.9" which also has the same inner diameter but the 15038 fits very tight. I am sure you would have had the same observation thouh the video does not show its bulging out.
To be honest - not really. Frames are crucial to integrity and stiffness of the frame, but they are rather cheap, so it shouldn't be a problem to get some from bricklink. New hubs and joints are expensive, I know (the best source of them is set 42099 which I recommend to buy as a great starting part pack). You can try to replace them with part 92908, but there will be major remodeling of front axle needed and I am not so sure you will get nice result.
An truly amazing model, love the color scheme, detail, everything fits in just perfectly and im still waiting for the upgraded Kirovets model!😁
Zetros introduces new size of tractor tires, so chances for new version of Kirovets (just in smaller scale) rise :D
@@Keymaker Can't wait!
You are amazing... The instructions are free and it performs even better than 9398! Maybe I will build it in the December (just for snowy offroad). I prefer the combination of black and yellow
I feel POWER!
So cool!
Very great building! 👍😊
я ваш фанат )) очень круто!
Omg crawler!
Maybe you make maz 535 im future?
:3
It is possible :D
:D
This is honestly one of the most amazing MOCs I've ever seen. Just wow. I run a lengthened Effermann's Ultimate 42099 Code Yellow chassis with custom extra low gearing and locked diffs. I'd love to build your MOC to compare the two!
I'm glad you like it. Please do what you said and then share what you think about this MOC :)
@@Keymaker here is my MOC climbing a wood/rock pile: czcams.com/video/NiHPPPRk2oA/video.html
very good!
is amazing O_O, im triyng years to do one and cannot, this is really beautyfull :) thank you
'Openable doors' :-)
So awesome!!! i just can't understand why you don't have way more subscribers/views. I mean your stuff is waayyy cooler than what I make!! I guess maybe it will just take some time for it to get more attention, but keep uploading and I'm sure you will get there!
+ the fact that you give free instructions for a lot of your builds!
Thank you!
Wyśmienity model, bardzo dzielny w terenie! Po tym mchu jeździł jak po dywanie w domu :) A z Mustangiem poradził sobie jak prawdziwy monster truck :)
Mam kilka pytań:
1) Da się go zbudować bez buwizza, zamiast tego wykorzystać x2 PF receiver? Czy myślisz, że zabraknie miejsca? (jeszcze baterie...)
2) Czy po testach było widać jakieś zużycie na zębatkach? Na filmach słychać, że gdzieś tam jakieś zębatki przeskakują ;)
Dzięki! Co do pytań. Ad1) Nie próbowałem, ale patrząc na miejsce w środku stwierdzam, że spokojnie się da. Albo pojemnik na baterie pójdzie pionowo w miejsce buwizza (trzebaby wtedy przednią ramkę przesunąć o jeden stud do przodu i dograć piny) albo dać pojemnik na baterie na płask na tył, w miejsce instalacji N2O. Ad2) Nie ma żadnego zużycia na zębatkach, ten dźwięk co słychać to przeskakujące sprzęgło na małym siłowniku od sterowania ;)
Really awesome build! How does it steer without differentials, does it damage parts?
Thank you! It doesn't damage part at all. And lack of differentals is crucial during off roading.
@@Keymaker wow i actually made a crawler with diffs and it sucked 😭 , then replaced with no diffs and it was so much better... After I was on destination. Should've followed your advice lol
@@BrixDownUnder Happy to help ^^
А где инструкция на кузов УАЗика!?!?))))
Here ;) rebrickable.com/mocs/MOC-75601/keymaker/off-roader-uaz-3151-aka-khan-39-marshall-4x4-rc/#details
Can this work with Buwizz 3.0? Because i don't now how u switch motors for power and agile version.
Yes, it works with Buwizz 3.0, because it has 2 PF ports and it is all you need. In case of switching between power and agile versions: it isn't done on the fly. You choose either power or agile version during building. If you prefer power version - just follow the instructions. But if you prefer agile version - then you need to build front axle twice, instead of building front and rear axle.
Awesome build. which tires and wheels have you used in the video?
Thank you. Rims are standard lego piece - 15038. Tires: Rock Crusher 1.9"
@@Keymaker Thanks for the quick response. I have Mud Thrasher 1.9" which also has the same inner diameter but the 15038 fits very tight. I am sure you would have had the same observation thouh the video does not show its bulging out.
@@ravitalele1149 In general RC tires for 1.9" are great option for those lego rims. Tires I used are quite soft, so they are easy to fit.
is there a way i can build it without the 7X11 frames and the new hubs and joints?
To be honest - not really. Frames are crucial to integrity and stiffness of the frame, but they are rather cheap, so it shouldn't be a problem to get some from bricklink. New hubs and joints are expensive, I know (the best source of them is set 42099 which I recommend to buy as a great starting part pack). You can try to replace them with part 92908, but there will be major remodeling of front axle needed and I am not so sure you will get nice result.
@@Keymaker ah ok thanks
take the bean test on it XD
Haha :D It is to powerful for bean test :D