Video není dostupné.
Omlouváme se.
Make Your Own PVC Pipe Fittings - 90 Degree Bend / Elbow
Vložit
- čas přidán 4. 02. 2023
- Learn These Methods And Become A Master, A Run Through On Making A Segmented Bend From 2" PVC Pipe, Cutting 3 Full And 2 Half Segments At 11.25 Degrees On Each Cut, Preparing, Tacking & Welding Using A Hot Air Gun, The Plastic Fabricators Technique. #tutorial #welding #plastic #pvc
Brill work
Thanks
Good work mate
Cheers 👍
bruh u lay plastic weld like a tig specialist lol I need a lesson!
Hi👋 thank you for the comment, glad you enjoyed! I am partial to a bit of TIG welding. The link is a video tutorial for PVC welding if your interested. Thanks again for the comment 👍
czcams.com/video/4DAqwvZoBVk/video.htmlsi=UPUvEhXYmSTXftF8
Hi where can I get that welding stick
Hi, you can get the pvc filler rod from any plastic sheet supplier
Does this hold up to Dust control pressure?
But how strong is it? Is it as strong as the original PVC pipe? Planning on doing something like this for a greenhouse structure
Hi Steve, If PVC is welded properly it should be as strong if not stronger than the actual PVC Pipe or sheet, if you go to my channel and watch the "beyond Repair" and the "use this plastic welding technique" videos, in these videos welded parts get tested with a hammer. You could also use polypropylene which is much less brittle than PVC but can be fix together in the same way, hope that's helpful!
This is water leak proof ah 🤣🤣🤣
czcams.com/video/Lv52fes_1t0/video.html Thanks for your comment👍 please click the link above
What is the goo being welded called?
Hi, it's a 3 core pvc filler rod, there is also a smaller 3mm diameter version.
@@allkraftdesign6120 awesome, thank you. Im new to all of this.
Extrusion welding
Hot gas welding 👍
Looks more like a 45 bud
Whst lol.