10 MISTAKES When Working With Plastic Pipes (PVC, CPVC & ABS) | GOT2LEARN

Sdílet
Vložit
  • čas přidán 5. 08. 2021
  • Watch this BEFORE plumbing PVC, CPVC or ABS, you won't regret it!!
    Join my plumbing forum for FREE!
    got2learn.freeforums.net/
    Stuff from Amazon I used in this video:
    CPVC cement and primer kit: amzn.to/3xvPAMv
    ABS Cement (black version): amzn.to/3AluPEV
    Clear cleaner: amzn.to/3lGN9Ew
    Pipe cutter: amzn.to/37otW1U
    Mini Hacksaw kit: amzn.to/3xw95V8
    REED Deburring 1/2" to 1": amzn.to/3jqLznq
    REED Deburring 1 1/4" to 2": amzn.to/3fElgsK
    DISCLAIMER: Got2Learn is NOT responsible for any damage done to a property of which the plumbing wasn't done by a professional, I do not recommend doing your own plumbing if you are unsure about what you are doing, always hire a LICENSED contractor when doing any type of plumbing so you can be covered by insurances if something does happen, these videos are for entertainment purposes only!

Komentáře • 1,4K

  • @ivanolinghouse8732
    @ivanolinghouse8732 Před rokem +368

    I feel pretty fortunate that so far I've only made 11 of the mistakes listed here. Thank you for the excellent tips and subsequent explanations!

  • @walterholbrooks673
    @walterholbrooks673 Před rokem +13

    So glad your video is still up and running. Making it possible for a DIY repair. Called two plumbers and apparently not interested in small jobs. No shows. Thanks , will make an attempt to repair tomorrow.

    • @Got2Learn
      @Got2Learn  Před rokem +2

      So happy you guys are still here, i've been quite lately but it's much needed. thank you so much and good luck on your repair :)

  • @ascensionprotocols2879
    @ascensionprotocols2879 Před 2 lety +37

    Dude! I so appreciate your videos! As a home owner that isn't a plumber but needs some work done, your videos are so informative they allow a rookie like me to feel way better about taking on these projects. Thank you so much for your help! 👊😎

    • @nothankyou5524
      @nothankyou5524 Před 9 měsíci

      You are probably so far ahead from where the average plumbing employee is, it would make you wretch
      Working for a plumber doesn't mean you're trained to do plumbing work. Good luck to you! Good Job! I read stuff about girls and guys doing and enjoying great work, my days is always a bit lighter. Thank !!!

    • @devinnorsworthy9154
      @devinnorsworthy9154 Před 8 měsíci

      ​@@nothankyou5524i do plumbing work myself... and.... i do not recommend ANYONE does it by themselves. They try and save money by being superman-cheapasses and theyll get what they paid for lol. Think you can watch some training videos and have it all figured out. Stupid is as stupid does haha. If i hadnt had 6 months experience in the field prior i wouldnt even be runnung the plumbing work i am now. Impossible and stupid!

  • @georgiabrigand6793
    @georgiabrigand6793 Před 2 lety +14

    Excellent video and graphics quality, thorough discussion of all the aspects. Thank you very much for this systematic set of instructions. I've made only 1 of the 10 shown mistakes - cracked CPVC fittings because I applied way too much pressure. But the others were a very useful reminder.

  • @simonpaine2347
    @simonpaine2347 Před 2 lety +201

    Another tip for when you are marking the connections to ensure the angles are right, is to mark the depth of the tube, so that you are sure that the full amount of tube has entered the connector.

    • @Got2Learn
      @Got2Learn  Před 2 lety +9

      Great point!

    • @JohnSmith-bq4vh
      @JohnSmith-bq4vh Před 2 lety +13

      I use the purple primer to mark the depth.

    • @vanhattfield8292
      @vanhattfield8292 Před 2 lety +4

      ​@@JohnSmith-bq4vh And that is the correct way. 👍👍

    • @vanhattfield8292
      @vanhattfield8292 Před 2 lety +3

      if you are using the Primer correctly it is going to erase any marker or ink marks that you make. Just using the primer as a gauge as recommended from the guy below is a much better way to do it.

    • @simonpaine2347
      @simonpaine2347 Před 2 lety +4

      @@vanhattfield8292 I have never used a primer and therefore I'm guessing that not everyone does. However, I'm curious, presumably you either have to measure the length of the primer to get it right, or just guess it?
      Another way of doing it is to make the mark a certain distance from the joint. Say the length of a pencil. When the joint has been connected correctly the pencil will fit between the mark and the edge of the joint.

  • @Tachsman
    @Tachsman Před 2 lety +43

    All these tips have I learned myself over the years. Glad to see you put them all together here for others. A portable chop saw will cut the PVC pipe square with minimal burr and is easy, especially good if your project is large or has many turns and bends to glue together. A saber saw is also helpful in cutting 4 - 6 inch pipe.

    • @Got2Learn
      @Got2Learn  Před 2 lety +2

      🤗🤗🤗

    • @Methodical2
      @Methodical2 Před 2 lety +4

      I began using my miter saw some years ago because the scissor like pipe cutters would cause breaks in the pipe when they are really hard. Plus, it cuts like butter.

    • @Al_Catraz6917
      @Al_Catraz6917 Před rokem

      Cordless sawzall works great especially during repair/replacement of "already installed" pvc plumbing

    • @joeypeeps22
      @joeypeeps22 Před 5 měsíci

      Lol me too. I'm a pool man that does pvc repair for pools.

  • @paulcrandall2534
    @paulcrandall2534 Před 2 lety +21

    Using the right size jar of primer and glue for the size of the pipe you're working on. The larger jars come with larger dobbers which work perfect for larger diameter pipe. Same thing with the smaller jars for smaller pipe. It's not absolutely necessary to do it that way, but it does make the application of the primer and glue easier and it makes the job go that much smoother.

  • @bobsmith674
    @bobsmith674 Před rokem +11

    Love your videos. Clearly spoken, just the important information, and no wasted time. Wish more people would make their videos like yours.
    Very professional, thanks.

  • @revmo37
    @revmo37 Před rokem +33

    Thanks for posting this. Our trade, like so many others is dying. I was a 12 plus year plumbing apprenticeship program teacher. Mike Rowe talks about on his podcast that only 2 plumbers are entering our field for every 5 who retire over the last ten years. Also, I always say if you must go from say threaded brass or black to PVC or CPVC, I try to make the plastic be the male fitting, as to better protect against stretching or splitting. Thanks again for this my plumbing brother. I'm entering my 37th year as a Registered Master

    • @Got2Learn
      @Got2Learn  Před rokem +2

      🙏🙏🙏

    • @johnbagewll2321
      @johnbagewll2321 Před rokem +4

      It’s not dying it’s just being taken over by folks of whom have not been through apprenticeship and journeyman steps. Do it yourself folks and handymen start to get comfortable doing things wrong and don’t even realize they’re doing it wrong. Every trade has a certain way and technique for each application or installation. When you don’t learn from the old timers you’re not really learning. There are hundreds if not thousands of clips on you tube that make me shutter to watch. Then again there are very good clips like this one.
      43 year remodeler here. We are in a lot of trouble in the next 20 years or so. Some of the lads are still being brought up right. So there’s that.

    • @nothankyou5524
      @nothankyou5524 Před 9 měsíci

      Unfortunately, all trades are dying. Sometimes, it's the contractor, laborers. Rarely do I ever say Technician. "How to Do a Triple Evacuation" Do it three times How can you do a triple Evacuation faster? Leave everything connected to it again, later

    • @lluther9282
      @lluther9282 Před 8 měsíci +1

      Yep, I always use male plastic to copper or brass, especially since if I do anything wrong it's usually tightening too much.

  • @gBayCanada
    @gBayCanada Před 2 lety +9

    This is excellent content and very useful. Can't thank you enough. Starting a PVC project soon and am now more confident.

  • @ohboyotero
    @ohboyotero Před rokem +2

    Awesome, info-dense, efficient, and really well-produced video for any lay person. Thank you so much!

  • @thisissyron9475
    @thisissyron9475 Před rokem +1

    Thanks to your videos I was able to solder my copper lines and convert to pex a. You are a life saver, money saver, and honestly doing so much good in the world. I can’t thank you enough. I even had a line leaking as a I did the work and I went to your channel to figure out how to temporarily stop the leak. AmazIng, thank you!!! Onto these pvc fittings I have to do!

    • @Got2Learn
      @Got2Learn  Před rokem

      Thank you so much 🙏🙏🙏

  • @MatCendana
    @MatCendana Před 2 lety +14

    This is a very useful video for newbies and 'sub-amateurs' like me. The kind that knows a bit to do basic tasks, but often with not-so-satisfying results.

    • @Got2Learn
      @Got2Learn  Před 2 lety

      EXACTLY 💯

    • @ChiDraconis
      @ChiDraconis Před 2 lety +1

      Doing it is the only way to build 'right way' The purple is so that the inspector can see that cleaner was used the clear is the same; I like to use abrasive to remove the slick & dirt … this is a very informed work @ 3:09 speaker states holding the make up for a few seconds which is very correct as I have had them push back out if primer and cement are applied properly He shows it @ 3:15 that is what it looks like … if one is doing a non-critical that can be repaired very easily this is often not always that important but yes it does push out so hold it momentarily · We did yard lines ( in the front yard ) for a plumber that was running 256 trucks at the height of the boom

    • @mrkemblegilstrap
      @mrkemblegilstrap Před 2 lety

      Don't believe everything on the internet my friend. Read my tirade, above.

  • @CassieOllie
    @CassieOllie Před 2 lety +14

    Damn you Got2Learn. I'm about to go to bed and decide I'm going to watch a music video before I go. Open up CZcams see you uploaded a video 4 hours and here we are. Keep up the good work my friend, love these videos.

  • @djranlove
    @djranlove Před rokem +2

    Thanks, I've only used primer and glue once but I'll need to do so again tomorrow. The tip about marking the pipe so when I turn it that quarter of a turn is great.

  • @e11jah
    @e11jah Před rokem +1

    Great tips! I am very glad I decided to watch this video BEFORE I started my project!

  • @privacyatty
    @privacyatty Před 2 lety +4

    He is the Oracle of plumbing. Thanks brother.

    • @Got2Learn
      @Got2Learn  Před 2 lety

      😇😇😇😇😇😇😇😇😇

  • @jonathanklopf7581
    @jonathanklopf7581 Před rokem +8

    It is so refreshing to watch a REAL plumber explain the intricacies of plumbing, I as a retired licensed plumber of 40 years cringe when watching the misinformation put forth by the usual youtube "plumbers". thanks.

  • @adamdabomb1113
    @adamdabomb1113 Před rokem +2

    That idea of drawing marker on before cementing is so helpful!!! Thank you!!

  • @bob456fk6
    @bob456fk6 Před rokem

    I've done some work on irrigation systems with PVC and I learned some important tricks here.
    Thank you.

  • @rudysilver6669
    @rudysilver6669 Před 2 lety +10

    Wow awesome demonstrations and visuals really informative! It’s AWESOME!!

  • @1957mrbill
    @1957mrbill Před 2 lety +92

    A few of things I learned when using the purple primer. First, lay cardboard on the floor below the area you are working if you don't want permanent stains on the floor. Second, the applicator in the can holds a lot of primer when using. Before you remove the applicator completely from the can, tap it on the can's ridge so some of the excess liquid drips off. Lastly, when applying the primer to the pipe, angle the pipe with the end you are applying primer slanted down. If you don't you will find excess primer may run down the pipe leaving a purple streak. It won't hurt anything, but it makes for amateur appearance.

    • @KitchenerLeslie2
      @KitchenerLeslie2 Před 2 lety +8

      Thanks for sharing tips you learned after two applications of primer.

    • @stroys7061
      @stroys7061 Před 2 lety

      Already learned most of that the hard way. Good tips!
      👍🏻

    • @Stan_in_Shelton_WA
      @Stan_in_Shelton_WA Před 2 lety +1

      That is why they have clear primer.

    • @1957mrbill
      @1957mrbill Před 2 lety +6

      @@Stan_in_Shelton_WA Clear is fine if you are assembling non-plumbing PVC/CPVC pipe. It's my understanding that many city codes require primer with the added purple color so the inspector can verify it was used on all the joints.

    • @Quisqueyax
      @Quisqueyax Před 2 lety

      The purple primer is a mess. I place a wood or a thick plastic in the work area because as you mentioned, can stains everything.

  • @kenfourey-jones3121
    @kenfourey-jones3121 Před rokem +1

    Most informative. I have learned much from your video, in particular the use of a primer for solvent joints. Never thought of using an angle grinder to chamfer the cut ends of plastic pipe, what a time saver.

  • @truthteller3288
    @truthteller3288 Před rokem +2

    I'm a new maintenance technicians this was very informative, Im subscribing thank you.

  • @patmat.
    @patmat. Před 2 lety +3

    Wow thank you ! I thought I had it figured but I didn't know a third of your tips, micro-cracks yes, always inspect the pipe thoroughly.

  • @austincrane1465
    @austincrane1465 Před 2 lety +5

    When connecting 6" pvc, my coworkers struggle using red hot blue glue in tight connections. Applying the purple primer prior always helped push the fittings in with much less resistance.

  • @skip741x3
    @skip741x3 Před rokem +2

    You got a new sub here! as a total newbie who still done these repairs over the yrs when I had to, I gotta admit to making alot of mistakes after watching this... Very Needed info if ur gonna do this kind of work..luckily, even with the mistakes , the joints Ive done have held but Knowing this info will make for a much better result in the future, thanks!

  • @doitmyselfer1952
    @doitmyselfer1952 Před rokem +2

    Thank you very much for this video & your feedback. Also, thank you for being a person who "does it right" then shares their knowledge to help others!!! I really appreciate & respect that! 👍👍

  • @bluerep40
    @bluerep40 Před 2 lety +5

    Thank you for taking the time to make this very informative video…well done!

  • @bobstratton6362
    @bobstratton6362 Před 2 lety +6

    Reemphasizes everything I was ever taught. I have more than a few times been in a position that I could not twist the quarter turn. So I try to shake it or turn as far as I can but try to never just shive it together. I learned from an old timer, now I'm a old timer. Good video

  • @arethafazekas7539
    @arethafazekas7539 Před 8 měsíci +1

    Thank you greatly for the pace spoke thru out the video, I was able to take notes as well as follow...Good informative video. Will look for more, busy school semester

  • @Anthony-gq7dk
    @Anthony-gq7dk Před 4 měsíci

    Brilliant advice and it will save many people a lot of money, heartache and leaks !!! Well done to a great teacher.

  • @Viper6-MotoVlogger
    @Viper6-MotoVlogger Před 2 lety +5

    Yep, I’ve been guilty of not twisting the joint 1/4 turn. Awesome tips as usual mon ami.

    • @Got2Learn
      @Got2Learn  Před 2 lety +1

      Hihi aren't we all, cheers my man 🤘🤘🤘

  • @fabianrossini1691
    @fabianrossini1691 Před 2 lety +15

    It’s very inspiring seeing we still have people like you in these world. Thank you so very much!

    • @Got2Learn
      @Got2Learn  Před 2 lety

      🤗🤗🤗

    • @nothankyou5524
      @nothankyou5524 Před 9 měsíci

      Don't be inspired too much. At some point he's gonna want to retire, and the tech coming to see you will be wearing orange or blue. I push a lot of No Nots too a couple of suppliers and a couple of tube teachers. I've seen supervisors on jobs that can only use analog meters and digit manifold gauges. Great job, people Thank you!

  • @Shawn-x81
    @Shawn-x81 Před rokem +1

    Thank you. This is seriously helpful. Dealing with a broken CPVC pipe under my sink right now.

  • @omnarasi9637
    @omnarasi9637 Před 9 měsíci +1

    Thank you for enumerating the mistakes with a concise explanation.

  • @jackdolphy8965
    @jackdolphy8965 Před 2 lety +4

    Terrific list. I’d add that leaving pipe in the heat (like you said) and also in the sun must be avoided (even for much longer than an hour at most!) where I an in the Arizona sun especially pvc gets brittle fast.

  • @62Cristoforo
    @62Cristoforo Před 2 lety +8

    I’ve always dry fit first and marked my depths and matching angles using a yellow marker. Always ream the pipe to remove the burrs, otherwise that’s where your drain blockages will start, weeks or months later, at first with just with a single hair. And then that hair will accumulate a second hair, and so on ....

  • @jeremyhennessee6604
    @jeremyhennessee6604 Před 24 dny

    Nice , helpful video my brother. Thanks 🙏 for this.
    I'm a novice at best. But we recently had a plumbing emergency at my father's and were unable to afford the pros, so, they got stuck with me. And the only plumbing I've done was as a landscaper/irrigation systems. The guy who showed me how to do it was a plumber before and said everything you did word for word pretty much (about 1/4 turns, not taking too long after cementing/drying etc)
    I showed my father this video so he wouldn't think i was being "fussy".
    I learned early in my subcontracting adventures to always heed the voice(s) of Industry Standards. They're standards for a reason
    While of course the most obvious, desirable thing to do is always consult professionals in any trade for such things, videos like this can be a life saver for those who simply can't afford to.
    THANKS again bro. Great channel man

  • @jerrysmith9780
    @jerrysmith9780 Před 2 lety +1

    You say Thanks for watching, I say Thanks for sharing! Another very informative and enjoyable video.

  • @kentkagle3850
    @kentkagle3850 Před 2 lety +4

    You are an awesome man for taking your time to make all these videos.Thank you.You are truly appreciated by thousands and i hope you realize that.(The selfish or lazy wont tell you)

    • @Got2Learn
      @Got2Learn  Před 2 lety

      So nice of you, thanks you so much for your nice comment Kent!

  • @Odin029
    @Odin029 Před 2 lety +16

    The best way I've found to get a glued joint apart is a small hacksaw, a chisel, a hammer, some patience, and a few curse words.

    • @brimster-valorantaggressiv3419
      @brimster-valorantaggressiv3419 Před 2 lety +5

      Don't forget the super strength elbow grease and armpit sweat

    • @kevinintheusa8984
      @kevinintheusa8984 Před 2 lety +4

      I was installing a sediment filter on my pump to my sprinkler system. I inadvertently cut the outfeed pipe about a quarter of an inch too short and had to remove the 4 inches of pipe that was too short from the filter outfeed. It was a two-inch schedule 40 piece of pipe. I cut it with a small hacksaw on the inside and tried to break it along the cuts so I could twist it out without damaging the filter. I was struggling for about 45 minutes and it was not having it. My wife called her Dad and he came over and watched me trying to get the pipe out of the filter housing and he asked me to hand over the piece. He took the glue and smeared it on the inside of the pipe where it was bonded to the filter housing. He then took out his lighter and set it on fire. The inside of the pipe was crackling and the fire was pretty high. He waited for about a minute (it was a two-inch pipe) and then he used my channel locks to pull the pipe out of the filter housing with no damage at all. He was a Seabee and said he learned it from a trade plumber years ago and used it ever since to remove bits of pipe from fittings so they could be reused. I had to sand down the glue remnants inside the fitting but put in a new piece of pipe with lots of glue and it worked like a charm.

    • @williamdebow3478
      @williamdebow3478 Před 2 lety +3

      A hot air gun works wonders. You can also use a hot air gun to make slight bends in PVC pipe avoiding having to make a joint.

  • @MechaWrecka
    @MechaWrecka Před rokem

    Had to repair a pipe from my well pump and this video was super helpful. Thanks!

  • @petersfeat
    @petersfeat Před rokem +1

    I’m getting ready to do a repair and this video saved me from making a bunch of mistakes.

  • @shawnlucas4
    @shawnlucas4 Před 2 lety +4

    I'm glad I watched this video. I was just about to make 2 of the mistakes on the list (no chamfer and no 1/4 turn). Thank you!

    • @Got2Learn
      @Got2Learn  Před 2 lety

      🙏🙏🙏

    • @nothankyou5524
      @nothankyou5524 Před 9 měsíci

      No.yoi wouldn't. You've been great
      Bte: how many went bade over the ys

  • @moabfool
    @moabfool Před 2 lety +4

    Looks like I've been doing it right. I'm glad the pipe I glued tonight will get good cure time before seeing any pressure. Still learned some stuff, but this made me feel better especially because most of what I fix is other people's work.

    • @Got2Learn
      @Got2Learn  Před 2 lety

      🙏🙏🙏

    • @mrkemblegilstrap
      @mrkemblegilstrap Před 2 lety

      Read my tirade, above. Don't believe everything you see on the internet.

  • @leroiobi5928
    @leroiobi5928 Před 2 lety +1

    Very valuable information in a well put together manner

  • @smoxen
    @smoxen Před 2 lety +2

    I have been using PVC for about 20 years (a lot)....But, I learned A Lot in your video...Thank You !!

  • @larryzdanis5377
    @larryzdanis5377 Před 2 lety +16

    Very thorough.. few people that work with these materials know all these things! Regarding #8 (deburring) pretty easy to do with a utility knife sliding backwards around the rim (the material is so soft, the knife cuts it in reverse).. and also, don't forget to debur the inside of the pipe too, for a smooth interior.

    • @Got2Learn
      @Got2Learn  Před 2 lety

      😇😇😇

    • @markscott7400
      @markscott7400 Před 2 lety

      @@Got2Learn the q

    • @jacobmcpherson8211
      @jacobmcpherson8211 Před 2 lety +2

      You only need to debur when your boss is around

    • @larryzdanis5377
      @larryzdanis5377 Před 2 lety

      @@jacobmcpherson8211 haha, I guess thats why they call me "boss". seriously, though, if you don't debur the outside you may squeeze out most of the glue and not have a good joint.. if you don't do the inside, it can restrict flow but not too much so I'm more concerned about the outside

    • @thetruthisonlyperspective4872
      @thetruthisonlyperspective4872 Před rokem

      @@jacobmcpherson8211 or when you don't want it to fuck up

  • @Ron-no4tp
    @Ron-no4tp Před 2 lety +106

    As a licensed plumber (not always an indicator of someone who knows what they are doing) I wish to state this alternate method to the method of using pipe dope instead of Teflon tape on plastic female threads; never use female plastic fittings over metal male fittings. They crack, leak or both. Instead use male plastic threads inside female metal threads. No leaks, cracks or call backs. In fact I wouldn’t recommend plastic female threads over male plastic threads either.

    • @Got2Learn
      @Got2Learn  Před 2 lety +3

      👌👌👌

    • @aaronbaraiya3692
      @aaronbaraiya3692 Před 2 lety +1

      thats how how water main was done

    • @f1reguy587
      @f1reguy587 Před rokem +3

      Never had an issue with tapered metal fittings, had plenty of male threads snap off jobs to fix, usual issue being, pipe unsupported during backfill and pipes placed under tension, pipe not given expansion room, and people using the male or female elbows to change direction but somehow crossthread it at least once before getting it right… another one, bit off topic is to use pipe rated for the environment, sea air or boats, pipe under ground or in concrete, and in working areas like a winery or a honey factory, try to work yourself out of a job.

    • @MendoMoto
      @MendoMoto Před rokem +5

      Agree. If you have to use female PVC, spend the extra on an SR fitting, the steel ring helps give it more support under pressure and vibration, helps keep it from cracking.

    • @TYT695
      @TYT695 Před rokem +2

      Makes sense...thanks

  • @joshandersonmerge2media792

    Thanks for these tips. Most of this stuff is on the back of the can, but it is helpful to have a little more explanation. For example - they always tell you to "chamfer the edge after you make the cuts but since they don't say why, I never knew how much or even if it mean the inside or outside of the pipe. Now I know why that is important and may explain some leaks I've had!

  • @maungoojaved
    @maungoojaved Před 4 měsíci

    Dear brother, I would like to congratulate you for posting such a wonderful video for free. DIY is my passion, I like plumbering, electrical wiring and so on. Mistake number 5 was that attracted my attention the most regarding the use of a handsaw instead of an old blade from a cutter as you knew one plumber who accidentally lost an eye. Some 12 years ago I learnt from the Internet that the most common accident of DIY/amateurs is their eyes. Indeed I learnt something new from your video, hence I will take my precautions next time I shall be doing plumbering. Once again I heartily thank you for this wonderful video.

    • @Got2Learn
      @Got2Learn  Před 4 měsíci

      Nice of you, thank you for your kind words!

  • @VashtheReapr
    @VashtheReapr Před 2 lety +15

    I love that you called it pipe dope. I was trained in HVAC by some oldheads and thats what they call it. Having conversations with younger guys and calling it pipe dope and they look at me all crazy lol

    • @derekgoddard26
      @derekgoddard26 Před 2 lety +1

      Always the ogs lmao

    • @VashtheReapr
      @VashtheReapr Před 2 lety

      @Nathan LaRiviere i usually use the brand Rectorseal, so i also use rectumseal because Im still 5

    • @VashtheReapr
      @VashtheReapr Před 2 lety

      @Nathan LaRiviere yeah ill never use the white stuff again. The mess is terrible and it just smears you gotta clean it off with alcohol or brake kleen.

    • @skully70
      @skully70 Před 2 lety

      Teflon tape, liquid Teflon, dope, permatex, wick and anti-seize all have their place. I am glad to have all of them at my disposal. Right tool for the job and all that!

    • @stinkyham9050
      @stinkyham9050 Před 2 lety

      I'm a 43 year old HVAC mechanic and the kids I work with better call it pipe dope or I'm sending them out to grab coffee.

  • @jolo4036
    @jolo4036 Před 8 měsíci +19

    27 years in the business. The best overall vid on gluing . THANKS!!

  • @worldview730
    @worldview730 Před 2 lety +2

    Thanks for these tips. Especially the one at 4:08. I used to knock the prefitted nipple out of the fitting socket after I marked the depth with a hammer, now I won't do this based on your advice.

  • @janjaf844
    @janjaf844 Před 15 dny

    So glad i watched this. Im doing my above ground pool w pvc and i wouldnt of twisted. Thanks! Another mistake i probably would of done is tested to see if it works shoryly after. Might wait till next day to be safe since I'll be using 1- 1/2 at some points

  • @Captleemo
    @Captleemo Před rokem +3

    I have found that it is a good idea to occasionally sharpen the blade on a PVC cutter which really helps and also instead of just just squeezing the handles just squeeze enough to snug the blade to the pipe and then score the pipe a little bit by rotating the cutter a little before finishing the cut. I have noticed much less cracking which I only really notice on older PVC pipe.

    • @Chugwater_Cowboy
      @Chugwater_Cowboy Před rokem

      A couple of things regarding the PVC cutters
      1) NEVER cut cold pipe. Warm it up with a heat gun or hair dryer at the point of the intended cut.
      2) NEVER try to reuse old pipe that has been burried - even though there are a lot of long lengths that could end up being cut down for shorter runs, over time the pipe becomes brittle. As soon as you try to cut to length, you start getting broken and jagged pieces.
      3) NEVER use leftover pipe that has been stored outdoors. Sun Burned pipe is about the best thing you can use if you want to have leaks and dig up the yard to re-do everything. You should find this out when you attempt to cut it. Even though it might be warm from the sun, just watch it spinter and crack thanks to the sun-rot dryness.

  • @joshcowart2446
    @joshcowart2446 Před 2 lety +6

    I try to chamfer all pvc pipe. I think it’s more important than reaming it. Chamfering is especially important when I’m not able to twist the pipe or fitting. I use the Reed chamfering tool and it works great.

  • @guardian8319
    @guardian8319 Před 8 měsíci +2

    Dude your channel is excellently executed and an amazing source of information thanks it's very much appreciated!

  • @Stuart68505
    @Stuart68505 Před 2 lety +1

    Thanks. Many ideas to me that help ensure good results with plastic pipes and fittings.

  • @jhheidt
    @jhheidt Před 5 měsíci +3

    A lot of 'top ten mistake' lists are really just tip guides disguised as a top ten list, but this one is legit. Glad I watched this before I tried for a second time to do my pvc job or else I probably would have been doing it a third time today. Thanks for a great video!

  • @RECHEATMASTER16
    @RECHEATMASTER16 Před 2 lety +27

    In my experience with CPVC water lines, I have never used a primer, just FloGuard Gold one step yellow cement and have never had any problems. Great video!

    • @bradleyrussell1973
      @bradleyrussell1973 Před 2 lety +2

      Not code in my state bub. Give the xtra 4 bucks and prime those joints!

    • @pabster13
      @pabster13 Před 2 lety +1

      @@bradleyrussell1973 which state is that?

    • @mrkemblegilstrap
      @mrkemblegilstrap Před 2 lety +3

      Exactly, woody. Just because it's code doesn't mean it's correct.

    • @mrkemblegilstrap
      @mrkemblegilstrap Před 2 lety

      @@bradleyrussell1973 yeah if you are ready to fix all the leaks. Go for it.

    • @tarsemsingh4101
      @tarsemsingh4101 Před 2 lety +5

      We use only flowguard plus medium bodied yellow cpvc cement
      No problem anywhere

  • @j.morrison73
    @j.morrison73 Před rokem +1

    You are one great dude. Many thanks for the education so many of us really need.

  • @artofnoly9754
    @artofnoly9754 Před 2 lety +2

    Good tips. I'm making a home spun roof mounted 4" PVC solar hot water unit for my motorhome. The last thing I want are leaks.
    Tx for sharing.

  • @MrDarren5012
    @MrDarren5012 Před 2 lety +280

    Just a note : purple primer is the only one acceptable when work is being inspected by the city…clear will fail…

    • @TomCee53
      @TomCee53 Před 2 lety +20

      Unfortunately, not everyone knows that clear primer exists, and it’s easier to assume it was not primed.

    • @randyblackburn9765
      @randyblackburn9765 Před 2 lety +24

      Yeah too bad , clear makes a neater job and the trained eye can spot clear primer

    • @aarony184
      @aarony184 Před 2 lety +16

      It depends where you are located. Had this issue where I work with it failing inspection with clear primer. Was challenged and is now acceptable to use.

    • @emmber19
      @emmber19 Před 2 lety +7

      Depends on the region. Cleveland is ok with clear primer.

    • @wolfattack402000
      @wolfattack402000 Před 2 lety +8

      @@emmber19 Ohio code does not require purple primer because of the streaking that can occur on the exterior of the pipe. Clear primer is acceptable.

  • @edwardmccoy274
    @edwardmccoy274 Před 2 lety +4

    There is a big difference between roughing in some three inch for a two bath house, and connecting six inch cpvc, bevel pipe. Glue and primer.

  • @anuarbatcha1562
    @anuarbatcha1562 Před rokem +1

    Such a good piece! Thank you so much!

  • @carver4894
    @carver4894 Před 2 lety +2

    Another great vid from you PG!👍

  • @chadw9334
    @chadw9334 Před 2 lety +13

    I had a few comments.
    I'll start with #7 you never thread a plastic FIP on to a metal MIP. you only thread a plastic MIP onto a metal fip.
    Metal expands at a different rate than plastic, having metal threads inside of plastic can crack the plastic. (it's UPC plumbing code).
    #5 ABS is still legal in most municipalities, it is actually legal for tankless venting too. You have to use solid core ABS not foam core, but that is exactly the same for PVC too.
    Also it is recommended by the manufacturers of CPVC to use cutters on smaller CPVC so that you get a straight cut, no shavings inside the pipe. You don't have to bevel smaller CTS size cpvc, only larger IPS cpvc, cts cpvc is thinner in wall thickness, IPS cpvc is thicker wall thickness.
    #1 primer, you technically do not have to prime cpvc flow gard gold, the yellow glue has primer built in. Now if you are gluing cts flow gard gold transition fittings to IPS corizan cpvc then you must use primer and the orange glue..
    Good information on the video.

  • @jimertzman7766
    @jimertzman7766 Před 2 lety +5

    when connecting cpvc or pvc to copper I always use female copper and male cpvc or pvc.. This reduces the chance of cracking from over tightening vs the reverse shown in the video. This is more important on hot water as there are differences in expansion. Genova also makes hot water transition unions that are cpyc on one end and female brass on the other. I've only seen these in 1/2" but assume there are larger sizes. When connecting to the male fittings of a water heater, use a brass coupling between the heater nipple and the male cpvc/pvc.

    • @paulcrandall2534
      @paulcrandall2534 Před 2 lety

      Great tip. That's definitely something you learn through experience. lol

  • @raycalandra1887
    @raycalandra1887 Před 2 lety +1

    Very good video and great information. I have learned about some of these mistakes the hard way. I have had good success with Oatey flow guard one-step CPVC cement. It primes and bonds in one step.

  • @fosty.
    @fosty. Před rokem +1

    I like that reference mark idea. I'll be using that.

  • @samia8380
    @samia8380 Před 2 lety +3

    I like this video
    I learned a lot of things
    Thank you so much.

  • @a4channoob
    @a4channoob Před 2 lety +8

    11: using purple primer in visible areas. purpose of the purple primer is for an inspector to see it and then it gets covered up. suppose to use clear on final rough because its very easy to spill/drip and stain stuff i n the area. you do not want to stain brand new floors or cabinets for example.

    • @beerbeforebreakfast
      @beerbeforebreakfast Před 2 lety +1

      I've messed a few vinyl floors with purple in the passed. Never since tho! Floors aint cheap.

  • @jefferylivingston9003
    @jefferylivingston9003 Před 2 lety +1

    Awesome info share " this will truly help with my rehab project " thanks"

  • @fishanndchip
    @fishanndchip Před 9 měsíci +1

    Quick, Informative, Amazing. Keep up the good work sir!

  • @ZombieCakeHD
    @ZombieCakeHD Před 2 lety +25

    A little trick I learned from one of my coworkers is that when working with PVC on DWV applications, a fittings hub depth is half it's diameter. So putting a 4" 45 fitting on requires an insertion depth of the 4" pipe to be 2" into the fitting. Also means you only need to prime about 2" back, allows for a cleaner application and looks nicer too.

    • @tatchik77
      @tatchik77 Před 2 lety

      Thanks for this info, I'm a DIY homeowner repair-er? Lol

    • @Comin_at_U_Live
      @Comin_at_U_Live Před rokem +6

      So a 1" PIPE will go 1/2" in? And a 3/4" pipe only inserts 3/8" into a coupling or elbow? OR 1/2" PVC ONLY GOES IN 1/4"?
      UHHHH , HOUSTON WE HAVE A PROBLEM.... nothing a good book or hiring someone that knows what they're doing won't solve.... attn: be careful with advice from the comments section..

  • @4AVON
    @4AVON Před 2 lety +24

    I was taught when connecting PVC to metal, to always have PVC go into metal, not around it... Great video.

    • @Gtihigh
      @Gtihigh Před 2 lety +6

      That’s the superior way. Plastic male in metal female is the way to go. 7/10 when i go to leaks in water mains in my area it’s because someone used a plastic female on a metal male at the house copper transit from pvc.

    • @ninjaplumbing5828
      @ninjaplumbing5828 Před 2 lety +5

      you were taught by a real repair plumber it seems.

    • @thepitpatrol
      @thepitpatrol Před 2 lety

      That is great advice

  • @ajalbetjr
    @ajalbetjr Před rokem +1

    Fantastic vid, especially for homeowners who have to try and do some work themselves, thanks for posting!! New Sub!!

  • @ridefitnation
    @ridefitnation Před rokem +1

    Amazing video and thanks for these great tips.

  • @JD-rp1fx
    @JD-rp1fx Před 2 lety +3

    Also, in some applications such as flue vent lines, a specified PVC primer and cement must be used (System 636 in this example) in order to certify. System 15 DWV may also. Make sure the primer/cement matches the application.

  • @pagepalmer6378
    @pagepalmer6378 Před 2 lety +65

    Quarter turn on the way home, not after the pipe is home. The chemical welding process begins immediately and the pipe and fittings should move as little as possible once they are put together. It also says this on the cans.

    • @Got2Learn
      @Got2Learn  Před 2 lety +3

      👌👌👌

    • @pagepalmer6378
      @pagepalmer6378 Před 2 lety +4

      I forgot to say thank you for the great content. I find these very entertaining.

    • @Got2Learn
      @Got2Learn  Před 2 lety +2

      @@pagepalmer6378 you are most welcome Page!

    • @carver4894
      @carver4894 Před 2 lety +3

      Okay on 8in and bigger it's almost impossible to turn it after its home but I've never had a leak quarter-turn after its home with 6-inch and smaller. That's in my 32 years of pressure pipe gluing. I clean the heck out of the pipe and fitting. And dirt is always cleaned off with water not cleaner or primer. After the pipe is dry Prime it glue it.

    • @Got2Learn
      @Got2Learn  Před 2 lety +4

      I use a belt to turn it.

  • @lauribuckman2379
    @lauribuckman2379 Před rokem +1

    Very informative! I learned I will call the plumber. Thank you!

  • @HenryJMuckenfuss
    @HenryJMuckenfuss Před rokem +2

    Great tips. I've used a marker on many installs before.
    Today I finished running 34' of 1 1/2" kitchen drain and rebuilding the under sink plumbing. A previous owner had run the line into the main with about a ten-inch drop using two forty-fives into a straight pipe and then a ninety into the main. Needless to say, it plugged big time, and oh yeah, they didn't bother to put in a cleanout.
    I went back to check all my fittings and found I missed one side, so I had to pop the pipe out of the hangers for several feet to allow me the flex to pull it apart and seal it.

    • @Got2Learn
      @Got2Learn  Před rokem +1

      Good job art.

    • @nothankyou5524
      @nothankyou5524 Před 9 měsíci +1

      I use a variety of colored markers, plastic especially. I've always told the inspectors they came from overseas. Liguid Solder kills 2, plummgf

  • @TheEulerID
    @TheEulerID Před 2 lety +3

    Rather different to here in the UK where a solvent cement is used on PVC lines. I've not seen a primer use, and on PVC (and ABS) pipes a thixotropic combined solvent cement is used on both surfaces and which basically dissolves the surfaces and welds it all together. That said, I've never personally worked on welding pipes bigger than 50mm (or 2 inches) except for bosses connecting to 110 mm (4.3 inch) soil pipe.

  • @michael1242
    @michael1242 Před rokem +3

    When PVC is manufactured it is heated . The acetone in the purple primer is to break the smooth glaze off of pipe and fittings and act as a softening agent. Mainly to break the glaze.

  • @mrgreen3109
    @mrgreen3109 Před 2 lety +1

    Great video. I have encountered #5 before. After I learned my lesson iv changed the way I cut them. Cut up the good work. 👍

  • @truthmatters1950
    @truthmatters1950 Před 2 měsíci

    Real practical tips, clearly and succinctly narrated. Thank you for sharing your valuable experience with us DIY hopefuls!

    • @Got2Learn
      @Got2Learn  Před 2 měsíci

      Thank you, don't forget to share :)

  • @vincenthuying98
    @vincenthuying98 Před 2 lety +17

    You can also improve the covering of the glue by applying the glue on the pipe and inside the fitting with an opposite direction. So, let’s say you circle around the pipe and stripe the inside of the fitting in its longitudinal direction. This will create a surface on both ends which will make the chemical bond perform way better than the 1/4 circle turn. Turning a freshly glued pvc connection can also lead to leaks, by squashing out the glue from the capillary cavity it sits in, at the critical point of just before become ‘hand’ dry.
    Here in Europe, the turning action isn’t recommended.
    Also, priming is only mandatory for pvc pressure lines. For small sewage lines, from appliances to standpipe, I wouldn’t prefer primer with European pvc. Good clean pipe ends and the mentioned glue method will do the job to get an excellent glue joint. From standpipe and lower, I prefer rubber lip-ring fittings. No glueing.
    Or most preferred of all mirror welded High Density Poly Ethylene (HDPE), which is way stronger than pvc. Doesn’t deteriorate. Doesn’t break because of its thermoplastic characteristics. Is also way smoother on the inside compared to pvc and certainly abs. Especially in kitchen facilities.

    • @DCherbonnier
      @DCherbonnier Před 10 měsíci

      If you turn clockwise (CW) on both ends, aren't they in opposing direction when joined? If I'm right and you apply one in a CW direction and the other in a CCW direction they will be the same when joined. Just wondering.

  • @RudyeMcGlothlin
    @RudyeMcGlothlin Před 2 lety +5

    Enjoyed the video! Could you go into more detail on dry fitting? Especially on how to size pipe lengths correctly considering that you can't insert the dry fit pipe all the way into the joints.

    • @Got2Learn
      @Got2Learn  Před 2 lety +1

      If you like, you can mark the proper depth with a sharpie on the pipe so you know it goes in all the way while dry fittings, but you must take into consideration that on bigger pipes this gets harder to do , on 2" and less it's very doable :)

    • @rickydowell4195
      @rickydowell4195 Před 2 lety +2

      Yeah I can. Dont dry fit. Thats how joints can be forgotten to be glued. Thats not a good practice. Use a tape measure or if it doesn't line up cut it out and redo it for the couple bucks is worth spending then thousands on water damage. Practice and experience will come where you dont need to dry fit.

    • @mbburry4759
      @mbburry4759 Před rokem

      ​​@@rickydowell4195 If you use colored primer, you can dry fit and not forget

  • @anyimegamagyi
    @anyimegamagyi Před rokem +1

    Wow this is one of the most informative video on yt. Thank you😊

  • @BC-lo7kv
    @BC-lo7kv Před 2 měsíci

    Awesome explanation with dos and don'ts! Thanks!

    • @Got2Learn
      @Got2Learn  Před 2 měsíci +1

      Thank you, don't forget to share, it really helps the channel!

  • @armadilllo
    @armadilllo Před 2 lety +6

    Purple primer is also good for double checking your work , easy to see. Fittings and pipe don't fuse, I have chipped off fittings for repairs from pic a lot of times, with a success rate of 99.9% .If they fused you couldn't chip it off. Curing? Don't have time for it to cure when a customer is waiting for water or plumbing in pool pumps, the most I've ever waited is 5 minutes, usually less. I just did a 3 inch back flow valve preventer to city water to a school yesterday and waited 5 minutes, it's fine, just have to do it right. You're right though, those micro cracks suck, especially when you have to jackhammer a hole in someones brand new pool or deck to fix it. I've always just used my fingers to de-burr the pipe, works fine.

  • @Githrog
    @Githrog Před 2 lety +4

    Good vid man. I see these mistakes far too often. And a lot of these mistakes are being made by veteran pipe workers who are just being stubborn and are to prideful to change. I have multiple coworkers who refuse to bevel their pipe ends because they believe it's a waste of time.

  • @zemetrius
    @zemetrius Před 2 lety

    this video will be very helpful on the project i am about to start, you prevented me from making some costly mistakes, thanks.

  • @Dreamydazefarm
    @Dreamydazefarm Před rokem +2

    This was a awesome video bro 😎 I was about to hit the lowes and your video popped up and I sat down thinking it was going to be a bunch of common sense mistakes but you have a ton of knowledge put together here from years of experience and now I’m going to do this project with knowledge I was about to make basically every mistake you mentioned you totally saved me

    • @Got2Learn
      @Got2Learn  Před rokem

      Awesome man thanks 😊 🙏 🙌

  • @robertmrivera
    @robertmrivera Před 2 lety +8

    Glad I actually do most connections properly.

  • @paralellosll3849
    @paralellosll3849 Před 2 lety +19

    Number 11: Never put your grinder down like that (tip 8). You risk damaging the floor, table etc... Or on hard surfaces like concrete the grinder could skid away, potentially causing injury or damage. Every grinder ever made has a raised lip on the back, that's what it's there for. You can see it right next to the red strip on this grinder.

    • @paralellosll3849
      @paralellosll3849 Před 2 lety +2

      @@johng4527 The guard is not designed for that. It's there to prevent debris hitting you in the face as you cut/grind. Just because the guard is on doesn't mean it's a good idea to do it. I worked in a metal shop where one bloke put the grinder down like that, with the guard on. He didn't realise there was an off-cut chunk of metal on the table. The grinding disk flung it across the room and it lodged itself in another guys hip.
      Isn't it just easer to do things the proper way? I get that sometimes you need to get creative and use tools in a way that's not intended. But when it comes to stuff like this it's not creative, it's just lazy, or at best absent mindedness.

    • @Seldomheardabout
      @Seldomheardabout Před 2 lety +4

      @@paralellosll3849 Grinders are far more dangerous than people give them credit for. My father always took the guards off and made me do the work lol. I live with a small chunk of disk in my leg without problems, but still.
      Thank you for the info about the place to set them down. Any other safety tips for shop work?

    • @sirtimatbob
      @sirtimatbob Před rokem

      @@Seldomheardabout bud, you should get that removed. it's super prone to infection

    • @Seldomheardabout
      @Seldomheardabout Před rokem +2

      @@sirtimatbob The disk should be worried about me.

    • @benspearsracingify
      @benspearsracingify Před rokem +1

      I lived with a chunk of blade in my lip for a few years before removing it myself lol

  • @williamcharles9480
    @williamcharles9480 Před 2 lety +1

    After watching several videos on copper plumbing and PVC, I must give you kudos for being the most informative and thorough with your lessons. Thank you so much for sharing your considerable knowledge on these subjects.

  • @Methodical2
    @Methodical2 Před 2 lety +1

    Always learn something from your video. I've been a victim of breaking/cracking pipes using those scissor like cutters. I use a miter saw now and may buy one of those saw like cutters. I don't think I will buy another one of those scissor style cutters anymore. Btw, I am not a plumber by trade but do quite a bit of this stuff to have learned how to do a lot of the basic stuff and 1 or 2 tougher jobs.

    • @mbburry4759
      @mbburry4759 Před rokem

      An oscillating saw (multitool), is pretty handy for cleanly cutting under 1 1/2 inch, if you can't bring it to a miter saw