Ford Raptor Audion Full DA car stereo install
Vložit
- čas přidán 8. 12. 2021
- Get your shirt here www.dandfswag.com
Visit Dean and Fernando's Tool drawer for a all your install tool needs
www.dandftooldrawer.com
If you like what we do, support the show at Patreon-
/ fivestarcarstereo
Our Social links if you want to keep up with us
Facebook- / fivestarcarstereo
instagram- / 5starcarstereo
Dean- / deanbeyett
Fernando- / mr_lopez13
twitter - / 5star_carstereo - Auta a dopravní prostředky
![Ưu nhược điểm của bộ phối ghép giữa Tannoy và Denon [Nguyễn Bách audio - 0932005022]](http://i.ytimg.com/vi/pIATdxJZRio/mqdefault.jpg)
It would be so sick to see the reactions of people when they pick up their vehicles and see the work and hear it for the first time. With their consent of course. Great work guys!!
Ugh, so like “pimp my ride?” Nope, mo
sick....
@@leehodge2415 except real reactions and real projects. not staged tv
Master-level installers, masterpiece footage. Best in the industry, truly educational and utter enjoyable.
Dean, the 2 square technique to get an exact diameter measurement is absolute genius I've never seen it done like that man. Thank you I can't wait to try measuring a diameter like that.
The look and smile on Fernando’s face at the end. He was Wowed!!!
You don’t see that all the time. 👏🏼👏🏼👍🏼🎶🔊
For my money, Dean is absolutely the best installer on CZcams and Fernando is also a great compliment to the team as well.
Just an FYI (in case you didn’t already know), on newer Fords you shouldn’t ground any accessory directly to the negative battery post because it can cause the battery monitoring system (BMS) to read incorrectly and possibly cause improper battery charging. Ford states this in all of their manuals so if the owner isn’t aware I’d suggest informing them and having them either disable the BMS via dealer or using FORScan or they can simply pull the fuse for the BMS. Otherwise, the “proper” accessory grounding point on the 2015-2020 F150 is at the firewall near the battery, just to the right of the ECM.
I’m a Ford technician and yes this information is correct however, since they are using the zen a2b in navtv’s instructions it’s specifically stated to ground to the battery terminal because framing to the chassis ground will have too much resistance and you will have a lot of issues
just finished up a ful thesis system in a firebird 2 pair of thesis 6.5's in the front door a pair or thesis tweeters and mids in the dash and a 3rd pair of 6.5s in the rear stock location and 2 10 hertz mille legends 10's in a custom box on 2 thesis quatros, a thesis uno and a bit one. Sounds aboslutely incredible!
There's a typo in the title.. Amazing job guys🍻🍻
I don't think I can afford to ask what the labor for a job like this would cost. Awesome work
What an amazing install in an awesome truck! Thanks for sharing, guys!
6:17
Fernando installing roadkill is as satisfying as Dean fabricating amp racks.
Beautiful install guys!
Like two surgeons going about their business. Incredible work and knowledge.
I can not thank you guys enough for going into so much detail about this amazing build. I am all about an amazing sounding system, but even more about how clean the install looks and the attention to detail. I now have to reconsider the setup I was planning on doing to my 2019 F250 and check out a full install from you guys. Great job from both of you.
awesome install .......thanks for the long videos ...great job guys
Bloody hell i just checked the Audison TH 6.5 speakers it is worth $3,000 for the pair alone.
Never heard of this brand before had to look them up after my jaw fell off from seeing their price I finished the video. Great install though.
You guys are amazing top notch installers ,the attention to detail blew me away the sound deadening I believe was on the metal and plastic panel to totally eliminate any vibration ,I have seen great installs of expensive stereo amps and speakers put in a vehicle to go to a car show and just rattle to no end which kills the overall sound to that you get a a plus,the amplifier rack to me look very difficult but you guys nailed it top notch wire work beautifully done,zip ties for a clean finish red and black just perfect,the to tune the whole thing just very impressive routing in engine area runs smooth and nice ,you guys show your 5 star ⭐ talent ,I would like to know how many days the install took I'm going to say a week and also wonder how much the stereo equipment cost verses all the install cost for this project ,I'm going to say this install with equipment was around 8 to 9 thousand dollars.Keep the vids coming.
10 out of 10 skill level! Nice job guys!
Thank you gentlemen 👌
This was definitely one of my favourites from the last few years.
This looks like a awesome and great build, I know you guys will do a great job 👏👍👍👍👍👍👍
Thank You Dean, definitely want to do this to my 2018 raptor!
Boooooom guys!!!!!! FINALLYYY!!! BEST 5🌟 BUILD EVER!!! Thanks so much.
Loved this entire video guys! I know that sound when you finally achieve it....it's like Heaven! It's like the band is THERE!
I wish we could get some customer reactions! I know some don't won't to be on film buy maybe one or two. lol.
Oh man....those Raptor badges were a perfect finish to the system very nice!!!
Wow, the thesis mids look beautiful with what you made!!!!!!👐🏻5⭐💥yes, save constantly, like ac for the audison bit dsp👍🏼
This is an amazing installation! The sound quality and clarity are top-notch, and the fitment looks great. Great job on this upgrade! 😊 #fordraptoraudiosystem #carstereoupgrade #installation
Truly the most expensive raptor with a 25k system great job guys true professional experience.
Plug and play preamp, that's a cool idea for amps to have.
I wish I had a good fun job like you guys. Willing to relocate... top sales associate in my store. Get me out of Cali... great quality vids and service. Keep it up!
that Segway music was great.... i really got to hear my home sub
Can't wait to see guys use the Ford Lightning as a platform for SQ comp cars with the subs in the Frunk and all the battery power I bet that truck's audio will be special if done right.
In my MK7 GTI:
I have Audison Voce K6 components in the front, and Audison Prima coaxials in the rear, both F&R doors sound deadened. I also have a Sundown SA10 Classic, mounted in a custom fiberglass box. My F&R speakers are ran by an NVX JAD800.4 amp, and my sub is ran by a Rockville db13 mono amp. It’s all processed through my factory HU, running a Massive Audio Flatline line output converter, and a Massive Audio EQ9 9-band equalizer.
It’s not a full Audison setup, but I'll tell you what, these Audison speakers are by far the best speakers I have owned, let alone listened to. They don’t give massive punchy mid-bass like a set of Focal Power, Kicker, or Hertz speakers do, but they provide some of the best SQ I’ve ever heard when tuned correctly! Zero distortion at very high dB levels, and the Voce tweeters are very clean and pure. I’ve owned Focal speakers, Polk Audio MM components, Hertz Mille’s, and Alpine Type-R’s, to name a few, and those are all great speakers, but they don’t compare to the clean power or sound the Audison Voce’s produce.
My dream setup would be an active 3-way Audison Thesis setup in the front, a component Audison Thesis setup in the rear, and have everything ran through an Audison bit-one SP, while keeping my Sundown sub (because it’s that good and IMO Sundown is the best sub brand out there). I would love this setup, but it would cost a ton of $$. Until then, I’m completely satisfied with my current setup.
Its very challenge, Good Job there.Always love your work ! I would Chose new stereo pioneer DMH_WT8600NEX replacement. That one is the best stereo we can have right now
One benefit to the sound deadening that few seem to mention is the resulting isolation from road noise.
So sick....
Holy crap that’s way out of my budget 2500 for some speakers sounds amazing
This absolute by far professional installation what I’ve seen on CZcams, thanks guys 😄👍🏻.
Great job👍👍👍 I'm gonna guess a price. Curious what others think. This is serious, one off, custom fabrication. Decades of learning the craft. Examples: Thesis speakers are $4500 per set, $6k in 3 way form. Labor would be $1k for just x-over adjustments, eq and time alignment alone. This job is weeks long. Assume $500-$700 a day per guy. Sound deadening the doors??? $1500+. I would say $8k number may cover the labor, but I doubt it. Another $8k for amps, Bit, Zen and wiring. Speakers, Subs, box and custom Touches??? Total $30k???? I'm probably quite low.
It's like watching your grandmother whipping up q meal for Sunday bruncg....Amen
The filling of the hole in the door is a massive improvement, I've owned Mazdas and VWs That came with doors that were sealed from factory and the sound is so much better even without sound treatment. My corolla sounds like a tin can by comparison even with sound treatment because infinite baffles are crap full stop no matter how dead you make it. Also can stop a lot of vibrations hitting the plastic outer door trim. I'd buy another Mazda 3 just for putting a good music system in.
This is my dream front door set up abs panel to seal up that big hole, sound deading in the door skins back and front sound foam on the door cards and finaly fast ring to finish it up... over kill you say? Yes maybe but i want it to sound the best it possible can. Qoute from dean😋
Nice
Dean u need to tell Mark from CAF about the ground point on his F-150 build he jus did a few months ago i think or around there. He used the factory ground bak there
Audi son is one of those brands I wanna try in a future when I have that kind of money to spend on system.
I would do something about bracket by the battery sitting and touching boost tube ... those boost tubes do slightly move around when turbos are running. Eventually this bracket will rub the hole inside boost tube.
Wouldn't mind links to the gear you install... Such a clean install and man that wasn't a cheap set up thats for sure!
Just stumbled in your channel. I absolutely love the attention to detail in these builds. If I may ask what is the typical ball park cost for a build like this one. I realize there are lots of variables such as choice of components etc. just trying to get an idea.
D&F You guys should add some demo music from the youtube creator library to your listening tracks. It won't get a copyright strike.
What would someone expect to pay for this install. ? I know the equipment is like 10k. . This was like 4 days of work and fully custom. Love yall work! Thanks for showing us.
Guessing around 15k
You guys should pre fab those door block offs and sell them. I'd be in for a pair for a similar truck.
Well done guy’s! Did you drill to the molex for door wires? Any tips?
Audio upgrade costs about one third of the value of the F150.
You guys are so thorough and I love the specific commentary all the way through the install.
I was wondering if you might be able to incorporate the cost of the merchandise you put into these vehicles as well as the cost for the install.
Other than that keep up the good work/information
I figured it was at least 8 thousand,right down all the Audison amps the one amp was almost 2.000 ,it was probably 5 or 6 grand for the amps ,dsp ,speakers and I imagine at least near 2,500 to 3.000 for wire and install, acrylic,and plastic,I can only imagine the sound in it was crystal clear.
@@seanhower5130 you are off by quite a bit. This is serious, one off, custom fabrication. Decades of learning the craft. Examples: Thesis speakers are $4500 per set, $6k in 3 way form. Labor would be $1k for just x-over adjustments, eq and time alignment alone. This job is weeks long. Assume $500-$700 a day per guy. Sound deadening the doors??? $1500+. I would say your $8k number may cover the labor, but I doubt it. Another $8k for amps, Bit, Zen and wiring. speakers, Subs, box and custom Touches??? Total $30k plus???? I'm probably quite low.
Dean has more tools than me😭
I would hope the thesis 6.5s are pretty amazing since they're getting 900w!
they wont sound 10x better than some 10x cheaper put it that way
@@mikexc90lol, yes they will. I have Audison Voce’s and they are the most clear sounding speakers I’ve ever had in a car, and I’ve had a lot of different brands thoughts the last 25 years
I'm curious to know if you think the Audison Voce speakers are in the realm of Focal and Morel?
Hey Dean, Hello Fernando....guys, I've been a total fan of your videos for quite some time now. What I want to know is, are you a distributor for most of the products that you showcase in your installation videos? Companies such as Ground Zero are nearly impossible to find here in the states, and Ground Zero, to be specific, has been completely unresponsive to the many emails I have sent to them, that includes the U.S. Distributor as well as the German Reps in Europe. Thank you for any help you may be able offer!!!
why not use wood and cover it with a material vs use the acrylic? Is it easier to use that in the laser, or better overall look and performance?
I wonder about my 2 cars 2013 toyota camry and my 08 impala, us the ground issue the same as the f150.. and when dean says, if you don't connect 🙄 to the battery bad things happen, does that mean you can burn a speaker?
What set ( complete) do you recommend for a 2010 model Peugeot 3008 Sir ?
So do they run new speaker wire to the doors or use the stock wires
So Dean and or Fernando do you and that peice of blown pvc to make that like it's own enclosure?
So you’re saying drywall screws and gorilla glue aren’t good enough for the Thesis speakers?
Would the Audison av uno be good for 2 JL audio w6
"Not a bad way to spend $10,000 dollars." lol love Audison
just for the components and amps, probably another 7,000 to 10,000 for the install...
I thought the sound deadening must be on the door( metal) and not the door panel.
Can you clarify that
What is the price range for an install like this?
Curious how much was that build?
Holy crap! I just looked up the Audison prices. Is this guy a sheik?
Audison amps...are they Class A or class AB?
How much treatment does it take to do one door in this fashion?
hi this is old but good in( Audison av 5.1k amp) analog to da card change :srew those screws from sides almost out and you can pull card out in easy way, btv still best amp for 2-way active front+ sub configuration(passive tweeter+midrange 4ohm 75w/channel A-class, active midbass 2ohm 240w/channel A/B Class, active subwoofer 4 or 2 ohm D class 600/1000w enough to feed sub, idont see better combo) so that is a poor Audiophile choice no.1. If someone find better AMP i woud please to hear or see that. BTW nice work you do
So how much did this cost? 15k? Only in my dreams.
Audion? Lol 😋
I feel like this is a repeat episode. Didn’t u guys do a Full DA Audison build before? U both were blown away and had the sameeeee comments. “So clear” etc
This must've been a 20 grand system.
please update your F150 logo!!!
Sure is alot of real estate for just a two-channel midbase amp 🤷
No country no Hank Jr???
AudiSon наверное
👍👍😎✌️🤟. ⭐️⭐️⭐️⭐️⭐️
What’s the ballpark cost on this system? Asking for a friend
The equipment alone is like $8k.
what a good way to spend 15k, it’s must be nice to be rich 😆
There is no H in TOSLINK
This video was recorded uploaded like 2 years ago in 3 or 4 parts
"1.65 millimeter".....that's a tiny rear speaker...😆😅
I fast forwarded it and I didn't see the sub?!
Last couple of minutes watch
Hey, you can cherish us with some NCS songs, please please