ATEM Mini - Overlay Lyrics and Graphics
Vložit
- čas přidán 25. 07. 2024
- In this video I show you how to overlay lyrics and graphics over your video using the ATEM Mini. This works for both the ATEM Mini and the ATEM Mini Pro.
LINKS:
Atem Mini: amzn.to/3a7mOvr
Atem Mini PRO (live streaming built in) amzn.to/38yH9cV
Atem Mini Extreme (more inputs and 2 outputs) amzn.to/384KIXP
USB-c cable: amzn.to/30mJoYc
Quadro P1000 graphics card with 4 outputs: amzn.to/3hAF8wo
VIDEOS:
Linear Keying with an ATEM: • Live Streaming - Lower...
CONNECT WITH ME:
Subscribe: czcams.com/users/subscription_c...
Facebook: / stephenballastmedia
Instagram: / ballastmedia
www.ballastmedia.com/consulting
*affiliate links
While I'm running ProPresenter, OBS and the Atem Control Software on the same computer for this demonstration, I DO NOT recommend doing this in an actual production environment. Run ProP and OBS on separate computers. You'll probably be fine running the ATEM Control Software along side either of those.
Good day sir, thanks a lot for your videos and explanations, they are life saver...Please, could you instruct me on how to make my lower third design transparent or how do reduce the opacity of the lower third image design. I have designed lower third image that my lyrics will lay on. I am using easy worship and the Atem mini to stream directly on Facebook. Note I am not using OBS because i could not get the video and audio to sync, so i am streaming to Facebook directly without any software in between...Thanks for your help. Eddy/the Netherlands
Does the Atem Mini Pro change your thoughts on this recommendation? I would like to use a a Mac Mini to run Propresenter 7 to send via HDMI to our Mini Pro which will upstream through an Ethernet internet cable to livestream on our CZcams channel.
@@jonfebus2724 Yes, definitely go with the Pro. It's worth the extra cost to be able to stream without a computer.
Ballast Media In this case you are using one laptop for the ATEM software, propresenter & OBS, using the hdmi, vga & usb output. What if for your presentation laptop, you are already using the only hdmi output on your computer to display on a projector? Can you use an HDMI splitter to send to both the projector AND the ATEM switcher from the same computer? Thanks!
I have one MacBook Pro for Streaming and another for presentation. When I run presentation MacBook into the atem mini, I am getting a buzz in the live stream. Any suggestions
Our church streams are about to be on a whole new level!! Thank you and God bless you!!
Thank you so much for this. As a beginner into all this, I was able to get my hands on one of the firsts ATEM mini pro in Sweden. I have since then spent more time than my kids on youtube trying to learn how to do all this. And still, no one can explain this the way you do it. Thank you so much. And every day I have hoped for the release of the fourth version and today it was there.
Came here after the audio management video for the atem mini, never thought about overlaying lyrics on top of video, always just switched to an alternate input running powerpoint. Going to give this a try before my next conference.
Awesome content man.
Great video! I am helping our church to start a media ministry and your channel has been a huge help to get us there with all the instructional videos you put out. Thank you and God bless you!
Last time I watched your video, I was still waiting for my Atem. Now, I got it and already streamed several events. Nice thing!
Thank you very much for your videos!
how much did you purchased it please?
Hello Mr Steve. I just discovered your channel and what a genius. Your explanation of the Atem Mini is so knowledgeable. Thank you and God bless you for sharing your knowledge
this is by the far the best explanation of exactly what i needed on all of youtube
Thank you Steven for your time and dedication! Great teaching. God bless!
You do an outstanding job explaining what is needed. Thank you so much.
Best tutorial and explanation on CZcams. Really helpful video to mastering the Keying in ATEM Mini. Thank you very much!
New subscriber- thank you for being so concise and thorough when explaining! You are awesome!
This is awesome, the end of weeks struggling with lyrics on streamyard, thank you!
Thx again Steven! ❤️ I‘ve learned a lot again. Greets from Germany, Philipp
Purely awesome tutorial and explanation!
very helpful, I appreciate you taking the time to make the video :)
Great video Stephen, always learn a lot from your content
Great video! So helpful. Thanks for putting this together!
Clear & concise. Thank you for sharing! Keep up the great work. You are a blessing!
Thanks very much for this video! I have been looking for this for ages. This answers my questions. I will be setting this up for my church using Worship Extreme
A very clear description. Thanks.
The information in this video is appreciated. Thank you kindly
I could hug you! This is awesome
You just changed the game for me. Thank you !
Best explanation I’ve seen on CZcams...especially if you are using pro7 like me..thanks
Great video! Thanks for your hard work.
Thank you for this tutorial. Very insightful!
Much appreciate the effort you put in! Thanks!
Awesome content! Thank you for all that you do! Blessings!
great how to video , thank you so much
He has returned
Hello sir,
I really glad that I´ve seen your videos and I knew that God used you for His glory to work with. I thank God so much when I met you here. At our church we would like to do that but we have not so much fund for that. So we pray for that if God give us to do that as soon as possible. Thanks so much.
Great work in your videos. You are very good.
Actually understood that that! Thank you so much 😊
Best explanation! Thanks.
thanks . Great video
Great job! thanks a lot!
Super helpful, thanks!
Very good! Thank you!
Thank you so much!
Great thanks
Thank you.
Thank's for sharing
Awesome Video✌🏽✌🏽✌🏽✌🏽🙏🏼
I appreciate your Video where I am trying to do
thanks a lot
And now the ATEM Mini Pro has programmable audio delay on the mic inputs! Yey!
Thanks
Can you do a short video about overlay using Powerpoint? I know a lot of small church using PPT and can afford to switch to ProPresenter (cost and re-train staff). Thanks
Hi Steven! Great video as usual! could you please explain the advantaged of the Propresenter over a simple app like keynote or powerpoint to prepare my lower thirds and lyrics? It is not that clear to me why propresenter is better that the other options really available on practically any MAC or PC. Could you explain it a little more? Thank you
Great video, I just wish I could find a ATEM Mini. It looks like there might be some online, but I just don't want to buy something and wait two months for it...
Thank you for this video,
I wanted to know if you can recommend a camera that works well with low lighting and also good for long distances.
Can we see a tutorial on using the atem mini with wire cast one software
This is super helpful. Thank you! Assuming this same technique works with the Atem TV HD?
Yes, all ATEMs have pretty much the same keying capabilities. Bigger ATEM models have more keyers, but they all operate the same.
can you add multiple mask in that video switcher?
Hey Steven. Thanks for the video. Quick question for you. If we're switching between lower thirds and pulling the full projector image (eg, a video being shown to the church, or the pastor using a power point) In the event we don't want it to be in the lower thirds anymore, would we need to set up another 'output' from ProPresenter and have a switch going into the 4th plugin on the Mini? Assuming the other 3 inputs are being used for cameras?
Can i use this to our system to broadcast on cable system of ys
Woww..sir Im looking to buy atem mini pro for live streaming some record programs..it's enough for purposes? And can you please suggest good laptop or laptop spec for connect with atem mini pro
One snag I ran into was that I couldn't get any input from any PC into the ATEM. I had to go into a windows advanced super nitty gritty display properties menu and then change my output settings to the correct framerate etc to get the feed to show up, per a different tutorial video. Might be worth mentioning.
Love your videos man! You explain everything so well! I do have a question regarding the ATEM Mini that I can’t seem to find the answer to anywhere.
If we had an ATEM Mini Prowith 2 cameras and our pc using 3 of the inputs, can I use the 4th input to daisy chain an ATEM Mini and add 4 cameras to that? The way I’m thinking....the camera selected on the secondary mini will show on the livestream when the 4th input is selected on the main mini pro. Hope you get what I’m thinking.
Yes, you could do that. It will most likely add a noticeable amount of latency on that input. In other words, from input to output of the Mini will have a certain amount of processing time, so the cameras coming from the sub-mixed Mini would be further behind in time then the cameras coming in directly.
Hi Stephen, I have a camera connected with an hdmi cable that works only on input 1. But i need it on input 3. the same set up doesn't work on input 2 or 3. 4 is already designated for L3's. The cable length if 40 ft. Thanks
So appreciate your videos! They are a big help for us setting up our livestreaming in church.
is it possible to this using NDI instead of HDMI port?
The Atem Mini does not support NDI, but if you take the video from the Mini in to a computer, then you can use a program like OBS to combine in NDI video.
Is it Blackmagic ATEM mini support for 4k camera...
Good day sir, thanks a lot for your videos and explanations, they are life saver...Please, could you instruct me on how to make my lower third design transparent or how do reduce the opacity of the lower third image design. I have designed lower third image that my lyrics will lay on. I am using easy worship and the Atem mini to stream directly on Facebook. Note I am not using OBS because i could not get the video and audio to sync, so i am streaming to Facebook directly without any software in between...Thanks for your help. Eddy/the Netherlands
thanks for this video, which is helpful for the initial selection and set up for the options (luma, chroma and mask). But, during a service, how do you set up for the numerous “slides” for the lyrics? For example, for the opening/welcoming song, there could be a refrain plus three verses. So how to switch from verse 1 to refrain, verse 2 then back to to refrain, etc., while possibly switching camera angles as well? Thanks in advance!
The computer with the worship software is usually run by a different person then the person running video.
can this be done in version 6?
How does it work for animated graphics like title of message or intro logo?
Hello sir, do you think it would be possible for me to stream a simple audio visualizer instead of lyrics using the luma keying option?
ive decided the best way to do this is to run the atem output through a computer with ProPresenter and let ProP do the streaming. Can either use the atem as a web cam or you can use atems hdmi out into computers hdmi caputure so you can still use the ISO recording on the atem’s usb c port. No keying required. With ProP at the centre of operations you got a lot more power and you dont need to deal with ATEM’s awkward clunkiness. I dont have an atem extreme yet but that is the goal. then i will use Mix Effects to use it’s super source capabilities with ease (came out long after this video was made). Im assuming pro presenter didnt have streaming at the time this video came out.
Thank you for all of your informative videos! What would you recommend to do this with Pro6?
I don't believe there is a way anymore unless you already have the module. And purchasing the module you need would cost more then upgrading. So, upgrade to 7.
Ballast Media thank you! We ended up just using an upstream Luma flying key to display the same image from the house. Not what we want overall, but achieves the feel until we upgrade. Thank you for your videos and for your response! Blessings!
Looking for a low cost camera option for the Atem Mini Pro switcher. Do you have any suggestions? We plan to mount 3 cameras. We don’t have the budget yet to buy a camera that we can control the zoom.
When I do the Chroma Key, the hardware buttons do not change the cameras, it just switches lyrics between preview and live/onair.
Steven thank you for your video. I got my atem mini and a MacBook pro. What is the best way to record the video utilizing atem mini to my computer without losing resolution? I tried OBS but i lose a lot of resolution compared to when the video is recorded straight into my camera. Your video looks really nice, how did you recorded?
It's the bit rate setting. For streaming we set it between 2500 and 6000, but recording should be more like 12,000-35,000. Your camera probably records at a bit rate between 28 and 50 thousand.
hello sir i want to ask how to set atem mini pro and easyworship for live streaming but the live streaming only uses atem mini pro not using obs please help me sir i really need your help sir thank you sir god bless you sir
These videos have been so helpful in upgrading our video content on a budget. Thanks for that!
Our soundboard, cameras, and media computer are all in the sanctuary, but currently our recording and live stream PCs are in another building. My thought was to get the Atem Mini Pro set up in the sanctuary and have our producer just control the Atem from the other buildign using the software. But as I've found out, the issue here is that the producer doesn't have access to the multiview monitor (since I can't send the HDMI out signal that far).
Do you know of any solutions aside from something like a HDMI to fiber converter to send the HDMI out signal a fair distance? Am I just missing something easy within the Atem Mini Pro?
How far is the distance from where the ATEM Mini Pro will be and where the operator will be? If you convert the HDMI out to SDI you can run that up to 300+ feet. Then just convert back to HDMI and connect to a TV.
@@BallastMedia I'll have to measure that out, but if I had to guess, it'd be closer to a couple hundred yards.
My ATEM mini is not being recognized by Camtasia 2020 or OBS. the screen looks blank
The webcam and Blackmagic show up as options.
The 920E works fine, but eh aTem Mimi is blank.
I have called Blackmagic they say call OBS or Camtasia
Camera
Sony
Handycam cx455
Nikon D750.
Any suggestions?
How do you connect your lyrics and video showing together on obs I thought you used different capture, so how did you mix the two together from your obs or from your ATEM mini ?????
Hi Praise the Lord I am really thankful to you and God for helping us online learning about Black magic switcher in cameras.
This is Pastor Akashdeep Sharma from India
I need more help I want to start a online TV channel 4 hours everyday for that I am planning to use to black magic 4K and ATEM Mini with overlays logo on prerecorded Sermons, interview and more programs to share Christ. On CZcams and Facebook and latter on broadcast TV if you have made any video about this all please share the link with me it's not please help me. this is Pastor Akashdeep Sharma from India
Sir Ji this product is not avilabel above amazon inside india. can you couriered this product inside our india. what in ple
Thanks for this video. Just to be clear, this is only for production at the venue. If you wanted to live stream all of this, what would you do?
That's what this is for. The presentation software can be used at the same time to display lyrics in the venue as well as generate the overlays. Take a look at the videos earlier in this series on the ATEM Mini for how to live stream from the Mini.
Thanks for sharing Brother Steven. What are your thoughts on the Yolo box vs the Atem Mini? Are there advantages with one over the other?
So far I'd say go with the Atem Mini, cost/performance is better with the Mini Pro.
@@BallastMedia thank you
Very informative video. We used our for the first time Sunday. We had issues. Has the audio sync video come out yet?? I noticed Sunday that our video and audio did not line up well at all. We tried syphoning our lyrics from Pro 7. The syphon and audio lined up perfectly, but the video lagged behind. I am not sure how to fix this really. I plan to try NDI tomorrow. If that doesn't work, I will go will the settings mentioned in this video. I also found a few features that could help lessen the workload on our iMac to hopefully help the lag. With that said, our youth ministry uses OBS Streamlabs and the ATEM, and it is synced up well. They do not send lyrics though. Any ideas on what the issue might be? Do you think we overloaded the cpu running pro 7 and obs causing the video to lag? Do you recommend NDI? We have the ATEM mini pro
Any number of things in the chain can cause an audio/video sync issue. You can try and just do a time alignment - there is actually a delay in the ATEM now so you can delay the audio by frames. but I show you how to measure the alignment in this video, but don't make the change in OBS, make the change in the ATEM: czcams.com/video/UCmr0KwbXxA/video.html
When using the Upstream Key, will the lyrics stay on even when I switch video angles (using multiple cameras)?
Yes, as long as you cut between cameras.
Options without propresenter?
Hi there. I’m using the software called Proclaim. How can I create a graphic with alpha channel and gray to create a linear key out of Proclaim. I’m trying to make a transparent lower third. Is it possible with my computer and software to create a linear key using atem extreme?
Can you use the upstream and down stream simultaneously for a logo and lower third?
Yes!!
Can I use Mediashout6 with OBS and the Atem mini to make Lower thirds? If so, please help!
Daniel did you ever get a replay? I am having problems using Mediashout6 with OBS and the Atem mini. The Atem mini is not communicating with Mediashout, is the video card?
Hello and thank for your very well explained videos. Would you happen to know if this lyric presentation will work with Proclaim?
Our church uses Proclaim since it does have the ability to set up volunteer users with ID’s, so they can log in from home to set up each service. Since most of our volunteers are young and dont drive and have to wait for parents or some adults get out work late. I dont know if Propresenter has that feature yet.
Thank in advance.
Yes, proclaim has multiple screen outputs that you can configure for lower thirds.
My pro presenter doesn’t recognize my ATEM mini any ideas?
Wait, My laptop have both vga and HDMI outputs but they output the same content. How did you make your laptop output separate outputs?? 4:07
When you go to Display Settings, you'll see the diagram at the top of the arrangement of your monitors. Most likely it is showing one or two of them in the same box. You need to select that box and then scroll down the page and select Extend Desktop, instead of Mirror. Also, these displays won't show up unless they are actually physically connected to the laptop.
I get down a bit of a rabbit hole when trying to decide a computer to purchase that could do this. I'm not overly tech when it comes to the computer portion. We have the atem mini pro up and running and would like to add lyrics. What are the specs of your laptop?
So I know this may be a dumb question. So we have an atem studio 4k. We run four cameras via sdi in and then run a dedicated out on our mac studio to it as well. I get how to do the lower thirds for lyrics but what about after the worship through music and the pastor has a powerpoint that has been imported into pro presenter how would that get handled.
Usually I run both the "lower third" output from the computer, and the main screen output to the switcher. So, during sermon when they use full screen slides, you can switch to that in your video as well. That is usually the simplest solution short of generating two sets of content.
Is there away to distribute video from ATEM Mini Pro to different monitors?
You would have to set the output HDMI to be Program, and then you could distribute that. But you'd give up the multiview to do that. If you need to distribute video locally, I'd look at stepping up to a bigger switcher, like the Atem TVS HD.
Thanks! What do you do if you don't want keying to happen for another section of the service? What if you want to present powerpoint slides that take up the full-screen and not just the lower thirds? Same with presenting videos in service for those who congregate and for those online (at the same time!)?
Just turn off the key and use that input as a full screen source from the computer. You'd need to format that part of your service to be full screen to both the projection output and the output to the Atem.
Ballast Media thanks so much! You are absolutely awesome! I see that you run both OBS / ATEM Software controls and Propresenter on the same computer. Would you recommend using one computer to run this set-up? How has it been for volunteers and their ability to do this live?
No, I would not recommend running all those things on the same computer in a production environment - I was doing that just for the purpose of the demonstration. You could run OBS and Atem Control Software on the same computer and ProP on another, that should be fine.
Ballast Media I see! Thanks so much for letting me know. I know you said that in another video but noticed the discrepancy in this particular video. Very much appreciate you friend! I pretty much set-up everything during this Covid with your awesome info. Aja u tap sdi, ATEM TVs, 3x canon r800s, and now Propresenter :)
@@seonggkim Hi, we just started doing this 6 weeks ago with our ATEM Mini Pro that we recently acquired (took 2 months to get it!) We use an HDMI splitter to receive HDMI from a laptop running PowerPoint (with videos built into the PPT slides) and then the HDMI splitter sends it to our screens for people in person, and also to our ATEM Mini Pro. Then we just use the Picture in Picture to use display the PPT slides with lyrics for songs on the live stream, and when a video is playing we cut to that camera source (the laptop) as the full screen input. Works well for us, although we've had issues with the HDMI splitter, but we've got it functioning now. Not sure if this will help you, I was watching this video to see if I wanted to get more fancy with doing lower thirds using the "Keys" (thanks Steve for the tutorial!), but to keep things simple we'll keep using Picture in Picture for now. Doing it this way means I have 1 person running the ATEM Mini to transition to camera sources (1 camera on "stage", the laptop, and still image with logo) and 1 person running slides on the laptop, and 1 person running our sound board. All volunteers running all three areas every Sunday and they have picked up the ATEM work easy. [Also with the ATEM Mini Pro we stream straight from the device, so no computer even connected to it during the service, I setup everything beforehand].
We are using the Chroma Key option, but in Pro Presenter, when you click the clear slide button, the screen will go completely black. You will only see the video underlying, if you have text on your slide. In between songs, the tech clears the slide lyrics, and then all we get is a black video on the feed. Do I need to have the Video Input option turned on, in the Looks panel? I only have the slide option selected.
No, don't use video in the look. It doesn't seem like your chroma settings are correct on the ATEM. Black should be transparent, so if you have no words displayed, it should show everything from your camera, overlaying nothing.
can we run with alpha key?
Yes, but that requires 2 inputs, a key and fill signal. That's called a linear key. So if you want to use 2 of your inputs on a 4 input switcher for your key, then yes you can do that.
Hello, is this tutorial valid also for propresnter V6? Tahnks!
You can only do multiple outputs with PP6 if you have the multiple output module. If you don't already have that module, you can no longer add it (it cost more then upgrading anyways).
When running lyrics from pro presenter and switching between cameras, the lyrics disappear as soon as I switch, how can I fix that?
In the Atem Setup program there is an option to change that functionality. Not sure why it defaults now to turn off with transitions, but you can change it.
Any help... We have Atem television studio (not the HD) and Pro Presenteter 6 and doesn't work for us, are we doing something wrong? Thank you
How are you sending your lyrics to the Atem? PP6 doesn't do multiple formatted outputs without a purchased add-on, so you'd have to use something like the stage display to send a black-background with your lyrics to the Atem. (They don't sell the add-on anymore because it cost more then upgrading to PP7)
Why my atem mini doesn’t recognized my pc or my latest apple”s laptop so I use pro presenter 7 for the lyrics
Usually if your computer doesn't recognize the ATEM, it's because your cable is a "charge only" cable (which is very common) and not a data cable. Be sure when you purchase the USB-c cable for the ATEM that it is labeled as a data cable.