how to make a Bluetooth RC robot Car Control using Mobile Phone | L293D | HC-06 | 4wd

Sdílet
Vložit
  • čas přidán 25. 08. 2024
  • Bluetooth controlled Arduino RC Car Control using your Mobile Phone | 4x4 RC car | L293D Motor Driver with HC-06
    ජංගම දුරකතනයෙන් යවන්න පුලුවන් RC car එකක් හදමු
    आपके मोबाइल फोन के साथ ब्लूटूथ नियंत्रित Arduino RC कार ड्राइव
    Hi friends... in this Video I am going to show you How to make DIY Bluetooth controlled Arduino RC Car Control using your Mobile Phone at Home (Code is Included).
    Things that you need | ඔබට අවශ්‍ය දේවල්
    • TT Motors - Amazon amzn.to/2ZQN85n
    • Wheels (4 Pieces) - Amazon amzn.to/3fRO9jm
    • Arduino UNO R3 - Amazon amzn.to/2WNBt5D
    • L293D Motor Driver - Amazon amzn.to/2OPYmRe
    • HC-06 Bluetooth Module - Amazon amzn.to/2CYLeXm
    • Jumper Wire (Male-Male, Male-Female, Female-Female) - Amazon amzn.to/3eKHDtm
    • 18650 Batteries (2 Pieces) - Amazon amzn.to/2OPZNPC
    • 16x9mm board for Chassis (I used a piece of Acrylic for this)
    ** Please disconnect the Rx Tx wires form Bluetooth module when you are downloading the code
    ------------------------------------------------------------------------------------------
    Please download the code from my Google drive : drive.google.c...
    Please download the Bluetooth RC car App from my Google playstore :
    play.google.co...
    -----------------------------------------------------------------------------------------
    Thank you very much for watching the video. Please hit the like button it really motivates me a lot and also don’t forget to subscribe my channel.
    Music
    Venkatesananda - Jesse Gallagher - from you tube audio library.
    #Psworks #DIYProject #ArduinoProject #BluetoothCar #L293D #HC-06 #arduinoproject #arduinoproject #diy #bluetoothcar #smartphone
  • Věda a technologie

Komentáře • 102

  • @AbdulMoiz.Entertainment
    @AbdulMoiz.Entertainment Před 9 měsíci +5

    You are a real engineer!...
    Yar bhai pehli bar to jab me ne
    L293D ke bare me dekhaa to koi bhi sehi tariqy sai nahi sekhaa raha tha lakin abb ap ka bhai pro hai

  • @RobotRangers-ot2lc
    @RobotRangers-ot2lc Před 3 měsíci

    Sir aap se request h 1 video or bnao jis me aap voice b add karo or btao ki ye program kese install karte hain
    Aap ka video bhout jordar h

  • @Irongod914
    @Irongod914 Před 9 měsíci +4

    it is not turning .When i press turn button it does not turn!. Instead it moves forward and back ward plz help
    (same happens with forward and back button xD)

    • @psworksinternational
      @psworksinternational  Před 9 měsíci

      Your motor's wire connection (+ / -) may be wrong
      Connect the positive and negative correctly according to the circuit diagram

  • @angelodomacena5770
    @angelodomacena5770 Před 3 měsíci +1

    it is okay to use a 12v rechargeable battery here? that is the only battery I have and I need to submit this in 4days

  • @joelhiramlopezgonzalez5260
    @joelhiramlopezgonzalez5260 Před 3 měsíci

    Very good video, I have 4 servomotes whose maximum current of each is 1.4 A, can I use this driver that you use? And if so, how?

  • @rifqirostyanta9954
    @rifqirostyanta9954 Před 3 měsíci

    Sir, why can't the car move? but seen on the serial monitor on the Arduino, forward detection (F) but the car is not moving??? Please help me

  • @oanikuttan5563
    @oanikuttan5563 Před 4 měsíci

    Why it not pairing with hm10 BLUETOOTH module

  • @takeo._.
    @takeo._. Před 9 měsíci +2

    Bro if i use HC-05 instead of HC-06 is it fine ??
    There will be no change in code and any other thing ??

  • @kushaltangudu3177
    @kushaltangudu3177 Před 5 měsíci

    I also did it correctly and it is connecting also but the car is moving continuously even after i disconnect the car

  • @user-rv9dp4vy1j
    @user-rv9dp4vy1j Před 5 měsíci +1

    Please provide me app in android i can not download

  • @AtoZphotofire
    @AtoZphotofire Před 8 měsíci +1

    Battery ko charge kaise karna hai mera battery same hai jo apka hai

  • @francisborong7170
    @francisborong7170 Před 5 měsíci

    Bluetooth module is not working on motor controller, it only works if i add supply on arduino. please help

    • @psworksinternational
      @psworksinternational  Před 5 měsíci

      please disconnect the Rx Tx wires form Bluetooth module when you are downloading the code

  • @AtoZphotofire
    @AtoZphotofire Před 7 měsíci +1

    I have completed all. Process but car is not moving in any direction why?

    • @marianaguadalupegrandelope5265
      @marianaguadalupegrandelope5265 Před 7 měsíci +1

      If you were able to move your car?

    • @psworksinternational
      @psworksinternational  Před 7 měsíci

      I did this project practically. There can be no error here. Make the circuit according to the wiring diagram. Use two 18650 batteries.

    • @AtoZphotofire
      @AtoZphotofire Před 7 měsíci

      @@psworksinternational I m doing

    • @AtoZphotofire
      @AtoZphotofire Před 7 měsíci

      Is there any chance of fault in parts if yes then how can I test parts is working or not

    • @psworksinternational
      @psworksinternational  Před 7 měsíci

      Did the android app connect correctly with the bluetooth module?

  • @RCToys-RacingShow
    @RCToys-RacingShow Před rokem +1

    niyamayi

  • @JiaTarabi
    @JiaTarabi Před 4 měsíci

    I cannot find the app sir in playstore

  • @rese7454
    @rese7454 Před 9 měsíci

    What software did you use for your diagram?

  • @aminakhan3932
    @aminakhan3932 Před 8 měsíci

    Hello sir this app not available in play store than what to do?

  • @Demonslayer-f3r
    @Demonslayer-f3r Před 7 měsíci

    I have a problem the app is missing could you give me a solution?

  • @user-rl2mv4to8m
    @user-rl2mv4to8m Před 10 měsíci

    Brother, my car gets connected but it is not running, it is not working, the code is uploaded still . do something.

  • @RONALDO..CR..7-SEVEN
    @RONALDO..CR..7-SEVEN Před 6 měsíci

    What shall i do i have a small driver module

  • @karann2868
    @karann2868 Před 9 měsíci

    sir I did everything as shown in the video..removed tx and rx also + bluetooth is connecting too ..whats the issue can u help me please as i have to submit this as soon as possible

    • @psworksinternational
      @psworksinternational  Před 9 měsíci

      Did your arduino program upload correctly?
      Upload successful?

    • @psworksinternational
      @psworksinternational  Před 9 měsíci

      After uploading the arduino program, did you connect Rx TX properly again?
      After that turn on arduino and open the app and connect as shown in the video

    • @takeo._.
      @takeo._. Před 9 měsíci

      ​@@psworksinternationalmy program uploaded successfully and even I removed rx tx pin at time of uploading and after that again add the rx tx pin into it then why it is not working

    • @takeo._.
      @takeo._. Před 9 měsíci

      I also have to submit it as soon as possible we have the same problem Bhai Teri theek ho Jaye to please bta diyo please

    • @psworksinternational
      @psworksinternational  Před 9 měsíci

      ​@@takeo._.Is there no movement?
      Did it connect to the app via Bluetooth?
      Check the battery voltage.
      If you do it as shown in the video, it will work.

  • @How_to85
    @How_to85 Před rokem +1

    ❤❤❤❤

  • @malishaudayan882
    @malishaudayan882 Před 8 měsíci +2

    Sir oke cod eka dannako

  • @asokaraveendra788
    @asokaraveendra788 Před 7 měsíci +1

    ලඉට් දාන බැරි ද

  • @RONALDO..CR..7-SEVEN
    @RONALDO..CR..7-SEVEN Před 6 měsíci

    Pls reply fast

  • @gfg5693
    @gfg5693 Před 4 měsíci

    Where's the code

  • @karann2868
    @karann2868 Před 9 měsíci

    bhai app install nhi ho rha kisi aur app se try kiya nhi chal rha hai
    please help

  • @Hackesp1234
    @Hackesp1234 Před 6 měsíci

    Bhai code

  • @abaansvlog117
    @abaansvlog117 Před 10 měsíci

    I did everything but its not moving
    Any solutions?!

    • @psworksinternational
      @psworksinternational  Před 10 měsíci

      Did you do these things correctly?
      1 Code upload successful? ( to arduino)
      2 Bluetooth module and Bluetooth app connection successful?

    • @abaansvlog117
      @abaansvlog117 Před 10 měsíci

      @@psworksinternationalyes i did everything same as the vid

    • @abaansvlog117
      @abaansvlog117 Před 10 měsíci

      Can you show a vid of uploading again please

    • @nawaminimuthukumarana5427
      @nawaminimuthukumarana5427 Před 10 měsíci +1

      I have the same problem too

    • @psworksinternational
      @psworksinternational  Před 10 měsíci

      @@abaansvlog117 disconnect the Rx Tx wires form Bluetooth module when you are downloading the code.

  • @marshaluchoi7641
    @marshaluchoi7641 Před 9 měsíci

    I want the coding sir

  • @malishaudayan882
    @malishaudayan882 Před 8 měsíci +1

    Sir oke cod eka dannako