This tutorial don't include servo.Its controlled by smartphone only. I think you are talking about this tutorial. czcams.com/video/EJwNwbXVTCk/video.html
Yes I definitely got the video wrong. I got another question, should I only use nano for constructing this or can I use the uno R3? cuz I have the r3 already.
i have been trying to build this car but the light on the bluetooth module dousnt turn on and blink and the code says that it is not correct. have any idea on why this is happening
pls reply to me when i try to load the code it gives the error avrdude: stk500_recv(): programmer is not responding what can i do ? i'm sure i'm selected the true com port
Hi, I've a similar kit, but I have a doubt about the Batteries, can I use 2 x 3,7-1600mah batteries or maybe 6 x AA of 1,5-2500mah? which is the best option? thanks
Hi there! Im working on a school proyect that is basically the same idea shown here but larger (a lot larger) using 2 wheelchair motors and a sabertooth 2x12 motor controller. So my question is, could i use the same code? Thanks in advance.
Did you configure your bluetooth hc 05 module? Mine is not getting steady led glow. It is blinking at regular intervals even after pairing with android device. What should I do? plz help
sir does your smartphones need a internet connection to perform the controls of the car or just need a application?. need your help for our software engineering subject
All is excellent except one thing: you have connected each two motors together... why then you call it 4WD robot? it is 2WD.. is not it? thank you for video
I did the same but the motors won't rotate on any command. Power is given to all, Bluetooth receives the command but motors won't rotate . Please tell a solution bro please as soon as possible
I'm a novice to all this, but have great interest and desire. How do I start learning to accomplish something like this? What are the resources that I need?
The whole car are connected correctly. I can connect the Bluetooth with our phone, but I cannot move the car with the app. The arduino code is the second one that you provided on step 15. I make a motorcar. Did anything i need to modify? Hope you can help us, thank you.
Sir as you have shown in the video it's good but what are the materials which have used in smartphone Controlles arguing 4wd robot.... Please mention me the materials names
Can i have the list of those materials used to create this amazing car? Im planning to create one.. And where i can buy these materials? Anybody please help me. I want to share this amazing invention to my students. Hope u can help me
Hey, I am trying to make a rc car with 4 dc motors using motor shield and joystick shield, using NRF24l01 could you please tell me how to connect the nrf24 on servoshield
Another question if you may please I only found bluetooth module HC-05 not 06. It has 2 extra pins. My robot only takes a few commands then i can no longer control it. It will continue to do the last command (keeps going forward, for example) Can you help me ?
Hi Sir, can i have the circuit diagram for this project?? I really need it to understand more about this project please... can you share the link for circuit diagram of this project?
I made a quadruped project and it has been running smoothly, but there is a problem that I found in my project, which is the power source from the battery, when using a source from a fake USB port, and smooth. but when using a source from a DC jack, my project seemed powerless, works but it seems like it's not strong enough to turn on all the servo installed, even though I'm using a 12v source, that's how to handle it, ..?
@@opengreenenergy Need more video like this,because I try to build a simple hidrolic robot with my team.It just cannot be compare with your robot car,your robot car is better and excelent.
Do I need both of the jumper wires for it to work. I only have enough money for the female to male. Will it still work if I only get the female to male?
+Open Green Energy Your actually my inspiration on this robot chassis. I keep watching this video so I can understand how it works. So far I already brought the chassis itself. I just need to buy the Bluetooth module, the motor drive controller, the mini nano, and the junper wires which will all come up to be under $30. I'm so close to actually being done. I just need a $25 amazon gift card and I'll be able to buy it! I'm going to get one very soon
My hc-05 module when I put vcc to 3.3v it didn't glow but when I put vcc to 5v it glow and paired also but it show error in software and car didn't move. Please reply and give me some good suggestion
So 3.7v x 2 18650 battery provides power for L298N motor module and from that module 5v is output to Arduino Nano right? Can I use separate power source for Arduino Nano? If so, do I need to share GND like you did at 5:08?
@@yabztek2417 Anyway, if different power sources with different voltage are used, it is ok to share the same ground. Let's say 9v is used for Arduino and 6v is for L298N.
or you could buy the elegoo robot car kit and get all the parts ready to put together... Then you can spend you time mixing and matching boards and programs.
Finally found a video that could explain easily and give product links too thanks
Gracias por tu video, resulta muy claro. Tenia dudas como se controlaban cuatro motores con un solo L298 y veo que son en paralelo
Man I couldn't find this vid until now and I already bought this Arduino and couldn't make it till now thanks!
Thanks sir. It really helped me. I was not able found a video that makes SmartPhone Controlled car using arduino nano. Thanks Again.
Are 2 Li Ion batteries really enough to run all 4 motors? and for how long can they run them?
No they cant. I dont know how he managed it in the video, but you need to apply a 9V battery
@@iqkflat no, only space for one
alguien me puede decir los materiales de parte circuito que se necesitan.
Great video, nicely filmed, and music not to bad. Thanks.
Hey OGE! I wanna ask you if I can use an arduino nano every instead of ardunio nano? Does I need to change anything? Does it affect in any way?
Instead of nano you can use uno also. If the board uses atmega328 microcontroller, it will work. No need to change.
@@opengreenenergy thanks 🙏 could you recommend an ios app for the project?
Aren't they the same thing
@@yashrajgaming416 I don't remeber it but it didn't work out at that time.
oooooo!!!!!!
bro robotic car superbbbbb😍😍😍
You are genius
Thank You
Amazing video! Love it!
your code is missing # include, is it not required to use the servo library? just curious
This tutorial don't include servo.Its controlled by smartphone only.
I think you are talking about this tutorial.
czcams.com/video/EJwNwbXVTCk/video.html
Yes I definitely got the video wrong. I got another question, should I only use nano for constructing this or can I use the uno R3? cuz I have the r3 already.
Bharath Kumar you can use UNO
Bharath Kumar
syed saud sir .....i wanted to ask that if we order arduino nano then arduino 5v and gnd wire is available or not...?????
i have been trying to build this car but the light on the bluetooth module dousnt turn on and blink and the code says that it is not correct. have any idea on why this is happening
Instead of arduino nano we can use arduino uno or not???....plz reply fast....
Yes yoyu can use it
Jeet Rajwani Teja
pls reply to me when i try to load the code it gives the error avrdude: stk500_recv(): programmer is not responding what can i do ? i'm sure i'm selected the true com port
follow
Ofc
Hi, I've a similar kit, but I have a doubt about the Batteries, can I use 2 x 3,7-1600mah batteries or maybe 6 x AA of 1,5-2500mah? which is the best option? thanks
Why my Bluetooth hc06 doesn't light up????.
Can u give me the code too?
+Pink Anderson check the weather the wiring is correct .
connetion to hm hi kr lenge hm apki video isliye dekhte taki jo material ap lagate ho vo kha se or kyse banate hai yeh sikh paye
I did it exactly as you did, but my bluetooth module does not send the signals, why?
I took a mega Arduino 2560, does something happen?... Sorry for my English, I'm Mexican and I like your videos
I also face this problem but can not solve it.
check the baud rate for the bluetooth module
José Abel Bañuelos Terés same here
My motor is nt getting on
Couz he tld 2 use hc-06 but when u click the link hc-05 appears
good job, very good looking robot I have seen till now
This program is used for hc-05
does it work perfectly for you?i want to uload the sketch an try it out
czcams.com/video/M9Q-iomhFdE/video.html
The video is very nice I like open green energy
What the code I have to use for this???
professional Rovers first learn English grammar then make robots
Learning to be nice is much more important than knowing a language. He was just asking for the source code, it was understood.
paste.ofcode.org/7tpVMfwAUcsbPsN4BXbnpB
José Souza sir this is not opening please help me
Hi there! Im working on a school proyect that is basically the same idea shown here but larger (a lot larger) using 2 wheelchair motors and a sabertooth 2x12 motor controller. So my question is, could i use the same code? Thanks in advance.
su programacion donde puedo conseguir?
en donde el profe garcia
paste.ofcode.org/7tpVMfwAUcsbPsN4BXbnpB
@@joseraysouza the code please your answer is incorrect
Thank u
Love u bro, this fcckng chasis is more acomplish to make than the same code of the car. XD, tnks a lot.
please give me Smartphone Controlled Arduino 4WD Robot Car ( Part - II ) Arduino code.........................
Read description people!!
paste.ofcode.org/7tpVMfwAUcsbPsN4BXbnpB
send it again plz]
Anyone needs help 7391977151
Ready to help
Did you configure your bluetooth hc 05 module? Mine is not getting steady led glow. It is blinking at regular intervals even after pairing with android device. What should I do? plz help
ihave made this project with arduino uno and bluetooth H05 module.. it doesnot work.. what can i do?
Can you describe about what the parts used
What type of battery you used here ? Please tell me the price also & where it is available ?
HERE IS THE CODE (TRANSLATED IN ENGLISH)
Int izqA = 5;
Int izqB = 6;
Int derA = 9;
Int derB = 10;
Int vel = 255; // Speed of the motors (0-255)
Int state = 'g'; // start stopped
Void setup () {
Serial.begin (9600); // initiates the serial port for communication with the Bluetooth
PinMode (derA, OUTPUT);
PinMode (derB, OUTPUT);
PinMode (left, OUTPUT);
PinMode (left, OUTPUT);
}
Void loop () {
If (Serial.available ()> 0) {// reads bluetooth and stores in state
State = Serial.read ();
}
If (state == 'a') {// Forward
Serial.println (state);
AnalogWrite (derB, 0);
AnalogWrite (izqB, 0);
AnalogWrite (derA, vel);
AnalogWrite (left, vel);
}
If (state == 'd') {// right
Serial.println (state);
AnalogWrite (derB, vel);
AnalogWrite (izqB, 0);
AnalogWrite (derA, 0);
AnalogWrite (left, vel);
}
If (state == 'c') {// Stop
Serial.println (state);
AnalogWrite (derB, 0);
AnalogWrite (izqB, 0);
AnalogWrite (derA, 0);
AnalogWrite (left, 0);
}
If (state == 'b') {// left
Serial.println (state);
AnalogWrite (derB, 0);
AnalogWrite (izqB, vel);
AnalogWrite (left, 0);
AnalogWrite (derA, vel);
}
If (state == 'e') {// Reverse
Serial.println (state);
AnalogWrite (derA, 0);
AnalogWrite (left, 0);
AnalogWrite (derB, vel);
AnalogWrite (izqB, vel);
}
If (state == 'f') {// ON button moves sensing distance
}
If (state == 'g') {// OFF button, stops the motors does nothing
}
}
Hi and thanks for the video
At 4:00 is there a mistake in the wiring diagram? you say IN2 three times shoudnt there be IN2,3,4 instead of In2,2,2?
bro! which board you used for fitting motors
great robot car... good I am impressed.....
can i use a different Bluetooth module since the bluetooth module you suggest is out of stock on the gearbest ?
sir does your smartphones need a internet connection to perform the controls of the car or just need a application?. need your help for our software engineering subject
This is nice But "DIY Projects By Sumit" Also Teaches Nice But you Explain Very Nicely
All is excellent except one thing: you have connected each two motors together... why then you call it 4WD robot? it is 2WD.. is not it? thank you for video
Quick question sir. How does that car actually go left or right? did you install any rotating wheel or ball caster??
Arnab Fouzder It's simple disable one side motor and rotating other side motor make the car turn.No such special arrangements.
I did the same but the motors won't rotate on any command. Power is given to all, Bluetooth receives the command but motors won't rotate . Please tell a solution bro please as soon as possible
thanks for this video because you help me make this car
Roshan Jha, please can u help me; the car is connecting to smartphone but it is not moving. Please help me
I'm a novice to all this, but have great interest and desire. How do I start learning to accomplish something like this? What are the resources that I need?
can I use hc05 Bluetooth module instead of hc06
where do you get 5v for arduino .i mean do you convert 12 v to 5 v and give it to arduino
very nice video, thanks. Do you have the wifi version of this?
Still now not, but I will do it in the future. Keep in touch.
@@opengreenenergy thanks!
Creative video, thanks :)
in part 1 you have just make the assembly but in part 2 you have opened and add wire connection ?
But it is very very cool and i am speechless.
+Jitendar Kumar Thanks :)
hi
The whole car are connected correctly. I can connect the Bluetooth with our phone, but I cannot move the car with the app. The arduino code is the second one that you provided on step 15. I make a motorcar. Did anything i need to modify? Hope you can help us, thank you.
By using two 9 vols battery for how long the robot can perform ? Please answer this, this is very important for me
This video explained all of the things i need
Why did you not remove the film from the acrylic?
Later I have removed it. Earlier not removed to protect it from scratch
Sir as you have shown in the video it's good but what are the materials which have used in smartphone Controlles arguing 4wd robot.... Please mention me the materials names
+manoj manu See the video description.
Everything is mentioned there.
What do we do with the coded discs? ( black disc you attached to the other side in part one ) we need to remove or not?
Oh nvm
what is the name for the application used??
Wow wow wow Beautiful
Where do i connect the 5v wire from arduino..which u have kept aside at 4:26
Pls hlp..
If we use arduino mega .....should we use breadboard or not....what changes should be made??
Hey dude thanks for video. I have a question. İf i use 9V rectangular battery, will car work?
that''s grate,if it has wireless camera,it would be better
i like your progacte but i ask you oun quastion
what is the name of this app?
Can i have the list of those materials used to create this amazing car? Im planning to create one.. And where i can buy these materials? Anybody please help me. I want to share this amazing invention to my students. Hope u can help me
Hey, I am trying to make a rc car with 4 dc motors using motor shield and joystick shield, using NRF24l01 could you please tell me how to connect the nrf24 on servoshield
good work putha
Another question if you may please
I only found bluetooth module HC-05 not 06. It has 2 extra pins. My robot only takes a few commands then i can no longer control it. It will continue to do the last command (keeps going forward, for example)
Can you help me ?
it is an mechanical mini project or not?
Sir,L298N Stepper Motor Driver (Red),has been used in your video????????
plz,give me the ans sir???????????????
Puedo usar el Arduino uno en vez de usar el mini ardunino?
Bro, your chessis is clear you can pull out the outer layer.
can we use hc 05 bluetooth module instead of hc 06 is their anything changes in the code for that
pls reply....
No
@@opengreenenergy do we have to make changes in the code ?
Did it worked with hc05?
Thank you very much, I will try it too with c# in Visual Studio
Hi Sir, can i have the circuit diagram for this project?? I really need it to understand more about this project please... can you share the link for circuit diagram of this project?
Very good ❤
Hello, Congratulations! Great video. What is the name of the application? The link does not work
sir can i use arduino uno r3 and Lm293d in this project?? should i change the code for this? please answer me as soon as possible
nice project . i like it very much
bro i have a doubt
Where can i get this products for a cheap rate?
pls reply
Naveen Vairavan AliExpress
Wow Amazing 👍👍👍👍
Wow nice, I want to do this now !!!😊😊
I made a quadruped project and it has been running smoothly, but there is a problem that I found in my project, which is the power source from the battery, when using a source from a fake USB port, and smooth. but when using a source from a DC jack, my project seemed powerless, works but it seems like it's not strong enough to turn on all the servo installed, even though I'm using a 12v source, that's how to handle it, ..?
i want to know the voltage of that two battery!!!!! can you tell me ?
Which software u use for creating app
Expecting u will reply mit app inventor
please can u tell me what type of screws are used in this project ???...please reply fast
What I would Change if I used other type of l298?
Hi, I find that piece or Directory Hara how we're lessons or name of the item to tell
how many and whch microprocessor u have been use...??????????
Bhai 4 wheels mei koi or design use nhi kar sakte kya
wow realy good dude....
Sir can I upload the code in my Arduino Nano first i.e before wiring can I upload the code in ARDUINO Nano sir please give ur suggestion .
can i use HC-05 instead of 06
plz reply fast .
plz tell me the wiring of hc -05 if yes
+rishabh pandey Yes you can use.The wiring is same as HC 06
Open Green Energy thanks bro
Great video !
Thanks...
I want to know where did you buy the KIT
Gearbest /IC station
Nice video
Thank You
@@opengreenenergy Need more video like this,because I try to build a simple hidrolic robot with my team.It just cannot be compare with your robot car,your robot car is better and excelent.
The program INO report a error in code line #include .
Can you correct this line?
Sir,please give me the full code for this project using by the bluetooth module(HC-05)???????????????
It's urgent sir>>>!!
Do I need both of the jumper wires for it to work. I only have enough money for the female to male. Will it still work if I only get the female to male?
You can use single core wire as a M- M jumper wires
+Open Green Energy thank you
+Jamaun Windham My pleasure :)
+Open Green Energy Your actually my inspiration on this robot chassis. I keep watching this video so I can understand how it works. So far I already brought the chassis itself. I just need to buy the Bluetooth module, the motor drive controller, the mini nano, and the junper wires which will all come up to be under $30. I'm so close to actually being done. I just need a $25 amazon gift card and I'll be able to buy it! I'm going to get one very soon
My hc-05 module when I put vcc to 3.3v it didn't glow but when I put vcc to 5v it glow and paired also but it show error in software and car didn't move.
Please reply and give me some good suggestion
I need sketch for the robot, where is it? It is not showing on the given site in description! Plz help
Is it possible to make this car go in a 360 degrees round path? Would I be able to program the 360" path in the Smart Phone to do that?
So 3.7v x 2 18650 battery provides power for L298N motor module and from that module 5v is output to Arduino Nano right?
Can I use separate power source for Arduino Nano? If so, do I need to share GND like you did at 5:08?
Yes, you're right! you can use a seperate power source but make sure to share the ground.
@@yabztek2417 Anyway, if different power sources with different voltage are used, it is ok to share the same ground. Let's say 9v is used for Arduino and 6v is for L298N.
@@jumbo999614 Does not matter if the voltages are different.
it's cool, thanks to green energy for this video tube
Can we use the other apps which is of same use?
or you could buy the elegoo robot car kit and get all the parts ready to put together... Then you can spend you time mixing and matching boards and programs.