I hope you enjoyed this video and learned something new! If you'd like to support me making more content like this, please consider supporting me on Patreon: www.patreon.com/howtomechatronics
@@HowToMechatronics hi Dan can use a Arduino pro micro to make a realy simple 4ch transmitter and receiver for rc car and also try to control the car with a phone.and make it realy compact.and also try to control it with a smart phone ❤️🤗🙂. thanks alot for these projects they realy help me to learn alot.and LOTS OF LOVE FROM INDIA.❤️
Probably a signal every ~1-5 secconds. Need to find what frequency to use. No need for data etc, just a precise "ping". Also perferabbly 100m or so range.
This is super cool! I’m fairly new to this, so I’ll have to learn more about it, but I am planning to build a rc car powered by a little 2 stroke engine this way. Servo motors for steering and throttle. You have a new subscriber ;)
Hi, thanx for the amazing video and please make more videos like these, really appreciate that! I had a question, can the signals of the receiver be increased from 700 meters and what is the frequency?
Hi How to mechatronics, I like all your videos you explain super well and I would like to challenge you : you have to make a video where you show how to make a multifunctional robot : - avoiding distance - tracker line - bluetooth joystick ( NRF24L01 or HC-05 ) and more if you want : ) Good luck
2:14 AMS117-3.3 should be connected to RAW to Be powered from the battery not from VCC , because VCC is coming from AMS1117-5 that power the pro-mini, which means you over load the AMS117-5 😊
Have you looked at the keywish rf-nano. It combines the two boards into one instead. Allowing for much smaller and simpler layout. I’ve got a few pcbs made up with the rf-nano on the way to try out.
I would like to know how to enable Acknowledgement payloads to send back data (such as battery level, text etc..). I've only been able to send back boolean values.
@@andresvelasquez3373 I followed julian iilet post on controlling a fan. Just have to declare an int or float variable to send back as payload. I haven't the time to dig further at the moment.
Thank you for your great videos and lessons. It’s always very clear and simple. It will be great if you can do one on expansion boards like the sensors shield Ver 5.0 or if you can recommend a you tube regarding it.
I have a question ?? please look - Is there any way to test SINGLE nrf24l01 board. Is it working or not. I mean test nrf24l01 board without second board. Is it possible ?
Many thanks for the good video. I think this could be a good way to make RC (even) more affortable. Do you think it would be possible to control FLYSKY receiver like the fs-gr3e? they cost 5 euro and they are super compact. so I would you use your transmitter with existing receiver.
One more request man, I'm going to build both of these transceiver set you have made...bit I'm very confused about how to connect the receiver to the Arduino Uno (FC) and the coding...a video from you will be great and helpful
HI awesome project, easy to follow. Nicely narrated. Btw, you dont have to set Programmer if you use FTDI. It is only necessary when using an actual ISP programmer (MISO, MOSI....) Another thought, please dont use solder blobs when soldering pins, its a really bad practice. Please take this as a positive constructive criticism.
Thank you, kept getting [ .ino error! ], later I took a different route to download. Finally was finally able to download gerber files.......I see a 100 ufd cap, what is the other smaller cap? 10 ufd??
can i use only a push button and nrf24l01 transceiver module as transmitter and servo motor and nrf24l01 transceiver module as reciever ? please answer the Q sir
hi sir dejan. awesome work am succesful in making this project. can you please tell us how to add digital output in reciver section .plz reply us its code
Thanks. Let see video 1.00’ - 1.06’ again. Your video showed Joystick right controls move to left/right and Joystick left controls move backward/forward I have once question It is possible whether you can use only joystick to control RC car (turn right, turn left, move back, move right)?
Hello. I made this radio and it was great, congratulations. but I need a 3 position switch. Can I connect directly by replacing one of the potentiometers or do I need to change something? Would you help me?
Nice project. Well done.🤙 Apart from having a longer transmission range, what advantages does the NRF24L01/Arduino configuration have over 2 ESP32's with direct Wifi connections, using uPython, MQTT, nodeRED, and/or BLYNK GUI? Thanks for sharing.😎
Would it be possible to have a stepped control knob on the transmitter that could switch between receivers? So for example, switching between model locomotives with the same receiver? This could be a channel switcher.
Recommend any videos or tutorials online for how to connect multiple 5V (and 3.3, and 3.7) circuits? Basically would like to know how to combine any 5V circuits together. To answer questions such as: Are opamps and optocouplers and similar to combine circuit designs the best way or is there a better way?
i want to use i-bus protocol so i can send data form receiver to flight controller with single rx-pin of receiver to tx pin of my flight controller and i don't know how to code it i tried so many time pleas help me
how to add steering end point to the transmitter because in my project i will change the steering with servo and i need to implement potentiometer control to set the end point of steering. it is also called dual rates.
I hope you enjoyed this video and learned something new! If you'd like to support me making more content like this, please consider supporting me on Patreon: www.patreon.com/howtomechatronics
Can I use nrf24L01+pa+lna instead of only nrf24L01 (receiver part I already built the transmitter using nrf24L01+pa+lna)?
Can I use Arduino nano instead of pro mini?
I would like to buy this as a kit :)
Hey Dan! Love the how to's bud! Keep up the great work! ;) Cheers !
Hey, thanks! I've learned a lot from you about RC planes. Thanks for that too! 😊
Hey guys im fan and subscriber of you both i love both of your work . I've learned so many thing's froum your videos
Hey can we have a Quadcopter build video with this controller😍😍
Hats off for both of you genius. Flite test and mechatronics. I am non tech but you both changed my interest. Learning from you videos.
@@HowToMechatronics hi Dan can use a Arduino pro micro to make a realy simple 4ch transmitter and receiver for rc car and also try to control the car with a phone.and make it realy compact.and also try to control it with a smart phone ❤️🤗🙂. thanks alot for these projects they realy help me to learn alot.and LOTS OF LOVE FROM INDIA.❤️
What is the range?
I have been looking for something like this for a year now ,and this it the right one, thanks alot. Best diy receiver ever
If you are interested in DIY remotes, look up TheDIYGuy999's Micro RC.
I'm really proud of this Macedonian boy. Best projects and tutorials. Congratulations
Very long gap brother I was waiting for ur videos
Can you make some sort of "Radio Ping" device for finding lost drones etc, using manual signal finding methods?
Probably a signal every ~1-5 secconds. Need to find what frequency to use. No need for data etc, just a precise "ping". Also perferabbly 100m or so range.
I was waiting for this receiver from a very long time :)
Damn, I was waiting for "…and you can buy all of these components as a kit on my website.".
oh man an other top site to goto, betwen you and dronebot workshop what is a guy to do so much to look at well done man
This is super cool! I’m fairly new to this, so I’ll have to learn more about it, but I am planning to build a rc car powered by a little 2 stroke engine this way. Servo motors for steering and throttle.
You have a new subscriber ;)
Can i use Nano board instead of Pro Mini with same program ?
Hi, thanx for the amazing video and please make more videos like these, really appreciate that! I had a question, can the signals of the receiver be increased from 700 meters and what is the frequency?
Every video is both educational and entertaining. I learn something new every time!
Glad to hear it, thanks!
Hi How to mechatronics,
I like all your videos you explain super well
and I would like to challenge you :
you have to make a video where you show how to make a multifunctional robot :
- avoiding distance
- tracker line
- bluetooth joystick ( NRF24L01 or HC-05 )
and more if you want : )
Good luck
i love you man, i watched every video you have, but you can't solder to save your life xD
It is always a pleasure to see your videos and the thoroughness with which you do things!...
In terms of power consuption, how efficient is compared with an common radio controller? Good video, very interesting
2:14 AMS117-3.3 should be connected to RAW to Be powered from the battery not from VCC , because VCC is coming from AMS1117-5 that power the pro-mini, which means you over load the AMS117-5 😊
Can we use it in drone??
A great video. explaining the codes was also very useful.
Thanks!
hi bro can you help me with the capacitors voltage because if i use wrong voltage i will burn it plsss help me with the voltage of 100uf and 0,1uf
@@vinzzz86 You can use 50v
@@electronic7979 can i use 100uf 50v and 0,1uf 50v?
@@vinzzz86 yes
Pla make a video on how to make six channel transmitter a receiver pls your videos are very cool I like it very much
Can you make a video of capturing videos from esp32 cam and showing to a tft screen
Have you looked at the keywish rf-nano. It combines the two boards into one instead. Allowing for much smaller and simpler layout. I’ve got a few pcbs made up with the rf-nano on the way to try out.
It looks like a good option, but I haven't tried it.
How To Mechatronics I will try to let you know how I get on.
Thankyou very much sir for making this 🤗🤗🤗
I would like to know how to enable Acknowledgement payloads to send back data (such as battery level, text etc..). I've only been able to send back boolean values.
hey, i would like to know if you solved your problem. I have the same problem, i want my RC to have a LCD to print values.
@@andresvelasquez3373 I followed julian iilet post on controlling a fan. Just have to declare an int or float variable to send back as payload. I haven't the time to dig further at the moment.
Thank you for your great videos and lessons. It’s always very clear and simple. It will be great if you can do one on expansion boards like the sensors shield Ver 5.0 or if you can recommend a you tube regarding it.
Your videos are awesome and easy to understand . Keep it up . We all love your project . 😎😎😁😀
Hey Mike, great video. Great also to see some young girls happy to get their hands dirty and do some manual work.
We Really missed you sir. it's really good to have you back.
How to connect transmitter to recever not connect transmitter to connect without control
I have a question ?? please look - Is there any way to test SINGLE nrf24l01 board. Is it working or not. I mean test nrf24l01 board without second board. Is it possible ?
What is range of transmitter
Many thanks for the good video. I think this could be a good way to make RC (even) more affortable. Do you think it would be possible to control FLYSKY receiver like the fs-gr3e? they cost 5 euro and they are super compact. so I would you use your transmitter with existing receiver.
One more request man, I'm going to build both of these transceiver set you have made...bit I'm very confused about how to connect the receiver to the Arduino Uno (FC) and the coding...a video from you will be great and helpful
It's the same as connecting it to an Arduino Pro Mini. Just follow the circuit diagram and connect the Arduino Uno to the same pins.
This is a great video I was wondering if you could do a tutorial on designing a voltage regulator that would take any input voltage and output 5v?
Cool dut what is use of push button in transmitter
I made this project using atmega328p ic. Everything is alright but when I connect to the nrf24 module the voltage regulator get very hot
exactly the information i was looking for. Thank you so much : )
Nice tutorial, as always! One comment on your preprocessor directives: constants have to be always in upper case.
Greets from an engineer ;)
Thanks! :)
@@HowToMechatronics hi, plx could u tell me. is there a way to use instead of plane battery another power source ? thanks in advance
387k suscribers is totally underrated! u rock!
Bro please make a video on how to make a electronic appliances jammer.
wow this is really cool
HI
awesome project, easy to follow. Nicely narrated.
Btw, you dont have to set Programmer if you use FTDI. It is only necessary when using an actual ISP programmer (MISO, MOSI....)
Another thought, please dont use solder blobs when soldering pins, its a really bad practice.
Please take this as a positive constructive criticism.
Hey, thanks for the remarks!
Awesome awesome AWESOME! very interesting. simple yet teaches a lot
Thank you!
You are incredibly innovative.
How to replace Arduino pro mini to Arduino nano
Great stuff. Glad to have found this channel
Thank you, kept getting [ .ino error! ], later I took a different route to download. Finally was finally able to download gerber files.......I see a 100 ufd cap, what is the other smaller cap? 10 ufd??
Waiting for ur next rc plane video !
Excelente materialización del proyecto saludos desde Colombia
Great! Very explanatory video, I love your schematics.
Thank you!
What is the total making cost of this transmitter and receiver
New subscriber why I Didint find this best channle this many days ?
Thanks!
Fantastic work mate. New sub
can i use only a push button and nrf24l01 transceiver module as transmitter and servo motor and nrf24l01 transceiver module as reciever ? please answer the Q sir
Hi, please upload reciever code for push button, i want to use some relays.
i am trying to add button code in receiver but no success please make toggle switch and push button example i am noob in Arduino language
Does it work with pixhawk flight controller or Ardupilot?
hew how come for the servo motors you do 0 to 255 instead of 0 to 1023 like the aurduino servo example does
Which components I should have to make this system...plzzzz tell me all the components?
More code to pickup especially the disconnect auto reset. Thanks!
Các chân GND trên mạch là nối lại với nhau đúng không vậy. Thân mến!
Please make drone with it
Perfect! At this time I make wifi control car model.
can we have a copy of the pcb design?
Thank you for making this tutorial.
Amazing tutorial. Could you maybe make a tutorial on how to connect a JR module to a diy Arduino tx controller?
hi sir dejan. awesome work am succesful in making this project. can you please tell us how to add digital output in reciver section .plz reply us its code
can i replace the arduino pro mini with arduino nano and how
Thanks.
Let see video 1.00’ - 1.06’ again. Your video showed Joystick right controls move to left/right and Joystick left controls move backward/forward
I have once question
It is possible whether you can use only joystick to control RC car (turn right, turn left, move back, move right)?
Good one
Can we use the transmitter and reciever to fly a drone
How can I use BTS motor driver with pwm by using this transmitter
Hello. I made this radio and it was great, congratulations. but I need a 3 position switch. Can I connect directly by replacing one of the potentiometers or do I need to change something? Would you help me?
Nice project. Well done.🤙
Apart from having a longer transmission range, what advantages does the NRF24L01/Arduino configuration have over 2 ESP32's with direct Wifi connections, using uPython, MQTT, nodeRED, and/or BLYNK GUI?
Thanks for sharing.😎
where did you have bought the batteries and the holder ?
What will happen if we use to transmitters at same time
Waaaaw 😍😍😍😍🤗😋i really like it
Keep going my friend😍😎😎
Would it be possible to have a stepped control knob on the transmitter that could switch between receivers? So for example, switching between model locomotives with the same receiver? This could be a channel switcher.
Recommend any videos or tutorials online for how to connect multiple 5V (and 3.3, and 3.7) circuits? Basically would like to know how to combine any 5V circuits together. To answer questions such as: Are opamps and optocouplers and similar to combine circuit designs the best way or is there a better way?
Sir make the plane iam waiting for your video
Sir why you connected two push buttons near joy stick of transmitter
How to use Mpu 6050 module to control any rc device's
And shall we have to re program the receiver to different rc cars plz reply sir please
How to make tube light electronic choke used PCB vedio
Perfect video 👍 , how to controlled a drone using this transmitter , please make tutorial.
i want to use i-bus protocol so i can send data form receiver to flight controller with single rx-pin of receiver to tx pin of my flight controller and i don't know how to code it i tried so many time pleas help me
how to add steering end point to the transmitter because in my project i will change the steering with servo and i need to implement potentiometer control to set the end point of steering. it is also called dual rates.
Vou tentar Fazer. obrigado
i don't know the soldering.Please tell me how can i learn it sir?
Great video! How easy to add telemetry? If just battery voltage.
Can we use it for quadcopter
Sir can i use 775 motors and 14v battery with this?
Can you make a car using bldc four motor and nr24l01 and one servo under 80dollars
Do you have any videos for how to control the speed of a BLDC motor in a closed loop?
Is it possible for a PDF version of the pcb
great video and explanation! Can you suggest a receiver which I can use in 1:64 scale rc car ?
have to tried to reduce size of receiver.. ? its too big for Rc planes
hi thanks for the videos i need some help on my drone project. not much, i need to control it wireless, can u help.
Is it possible you can make a long range receiver that can allow a robot to travel upon miles?
How can i use the bts motor driver with it
Please let me know the range of this module.. i want to use this on my rc plane!
i did a simple search and it said ‘100 meters’
kindly can I use the mx1508 dc motor speed control chip to control dc motors in the airplane??