How to make 12 volt 5 Amp battery charger at home || DIY battery charger.
Vložit
- čas přidán 25. 02. 2017
- Hi Guys here is the new video of my project "How to make 12 volt 5 Amp battery charger at home. DIY battery charger." from "Electrical and electronics projects" "E&EP" Channel.
This is 12 v 5 Amp battery charger do not charge low amp batteries with this your battery will explode you can charge more then 5 Amp batteries with this charger but,will take long time as compare to low amp batteries.
SUBSCRIBE HERE:
czcams.com/users/ElectricalE...
||***THANKS FOR WATCHING***||
❇FREE ENERGY VIDEO LIST❇
▶ How To Make Free Energy Generator 220V From Washing Machine Motor. DIY Free Energy Generator.
• How To Make Free Energ...
▶ Homemade free energy generator took place as wind turbine.DIY wind turbine generator.
• Homemade free energy g...
▶ Homemade Dynamo Generator 220V Attached To Two Stroke Engine. DIY Free Electricity Dynamo Generator.
• Homemade Dynamo Genera...
▶ Free energy generator homemade 220v attached to bicycle.DIY free electricity generator
• Free energy generator ...
▶ Free energy 220v from washing machine motor Part 2 is Revealed | Hints | DIY Homemade Dynamo.
• Free energy 220v from ...
▶ Making Free Wheel Energy From Microwave Oven Ring Magnets || PART 2
• Video
▶ Making Free Wheel Energy From Microwave Oven Ring Magnets || PART 1
• Video
❇E&EP DIY PROJECTS VIDEOS LIST❇
▶ How to make adjustable 1 to 20 voltage power supply from old PSU.DIY Bench power supply.
• How to make adjustable...
▶ How to make magnetic levitator using ring magnets || DIY Magnetic levitator.
• Video
▶ How to make 12 volt 5 Amp battery charger at home || DIY battery charger.
• How to make 12 volt 5 ...
▶ Without electricity switch board magic charger to prank someone.
• Video
▶ How to make adjustable voltage power supply from computer CPU power supply DIY bench power supply
• How to make selectable...
▶ How to make hot wire foam cutter at home. DIY styrofoam cutter.
• Video
▶ How To Make Knife Sharpener At Home Using Old Hard Drive.DIY Knife Sharpening Machine.
• Video
▶ How To Make Grinder Machine At Home Using PVC Pipe. DIY Grinder Machine
• Video
▶ How to make a Rechargeable Power Bank at Home as Well as Mobile Holder. DIY 2000mAH Power Bank
• Video
▶ How to make a continuity tester at home using 9v battery
• Video
▶ DIY phone holder while charging using 9V battery
• Video
❇AUTOMOBILE / MECHANICAL VIDEOS LIST❇
▶ Assembling CD-70/SR-70 Motorcycle Engine.
• Assembling CD-70/SR-70...
▶ How to assemble CD-70 Gearbox system | Assembling motorcycle Gearbox system.
• How to assemble CD-70 ...
▶ Installing piston and valves to CD-70 motorcycle engine | Head cylinder assemble/disassemble Ct 70
• Installing piston and ...
▶ How to stop oil leaks in CD 70 motorcycle OR how to disassemble/Assemble motorcycle head & cylinder
• How to stop oil leaks ...
▶ How to change clutch plates motorcycle 70cc OR How to install clutch plates to CD-70 motorcycle
• How to change clutch p...
▶ Changing complete chain set of CD-70 with chain cover.
• Changing complete chai...
▶ How to rebuild an engine honda, Honda GX-240 rebuild:
• How to rebuild an engi...
▶ How to repair portable generetor click here:
• How to repair portable...
▶ How to make electric starter for any generator:
• How to make electric s...
❇DIY LED TORCH LIGHTS VIDEOS LIST❇
▶ How To Make a Torch Light at Home Using PVC Pipe
• Video
▶ How to make usb led light for laptop with brightness increase/decrease option
• Video
▶ How To Make LED Flashlight At Home The Easy Way.
• Video
▶ How to make usb led light for laptop
• Video
▶ How to make a led flashlight using bottle's cap
• Video
▶ How to make led torch light:
• Video
▶ how to make rechargeable led torch light at home:
• How to make rechargeab...
❇SOLAR PANELS VIDEOS LIST❇
▶ How to check amperes and voltages of solar panel.
• How to check amperes a...
▶ My complete solar system setup for my home.
• My complete solar syst... - Věda a technologie
It is true that charging a 12 volt battery needs 14.0-14-4 volts, therefore I think that a limiting resistor would not only bring the voltage down to that but also protect the battery under charge. I am not a tech so I cannot tell what value of resitor is most suitable. All in all a good try though somewhat dangerous. Most important do not forget earthing (grounding for Yanks).
y
This is very good stuff for any batteries: ezbatteriesreconditioning.com
ton c gft
Bkyop
ton c bkore
*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*
if you put a limiting resister in the circuit ,the batteries will take far longer to charge and some may not charge at all depending on the type of battery being charged put the resistor in the bin, and you have a decent machine that you dont have to waite too long on the battery being charged,the resistor will just extend the time it takes to charge
its basic. anyone building this should put a small heat sink in bridge. or just thermal grease to case with screw. A dc breaker would be great too. A amp meter volt meter great addition.
Very good congratulations for everything !!!
Thanks baro bahut achi vidio hai
You should also show the output current !
it is very useful project
I want the circuit of 12 volt power supply using small transformer
Please use a 10ohm 10w fuseble resistor series with the charger output for limitting the current flow.
Pls make 24 volt battery charger with charging control for 100ah to 150ah battery video as early as possible. Wait for your reply. Thanks for this 12v charger video.
Great video, if you want to see other great 12 volt videos Thank you for the content
dude where do you get that box pls tell i really want to know btw great work
John Kill
you can get it from the shop where power supplies or voltage stabilizer are made
SONY TV thanks dude
Good work
If I use 12v 10amp transformer, which capacitor i want to use for make that
you should have add voltage regulater with a 12"volt capacitor to make it voltage constant . so that it will not damage your divice with voltage spick.
brother please make 12 v to 220 local made ups video.
12v local ups making video.
Thanks a lot i really appreciate the effort,creativity,and the kindness you have involve in educating me but what about the battery charger housing where can I get it thanks alot,next time improve on how to construct an automatic one
Great suggestion!
is se barey transformer se 12 volt ki batery charge kar skte ha kya
good and thanx
😅😅😅😅😅😅😅😅
Nice idea but for the following points:
1/ heatshrink used is too large
2/ bridge should be bolted to chassis
3/ mains cable needs to be properly clamped in plastic clamp designed for the purpose. As is, chafing is possible, and short to chassis danger exists.
4/ no need for capacitor. The type of battery this is designed for IS a big capacitor.
Suggestions :
1/ install a DC current meter so you can see when current stops flowing, indicating charged.
2/ a 9V or 10V secondary would be better. The rectified voltage wouldn't be as high as 19V. Leave this charger on a battery too long, you'll boil your battery.
Boy, good to see sound, safe, reliable third-world fabrication practices demonstrated here..
from where did you bought that box?
Nice job Tks for video.
Welcome!
thats a nice sharing
Thank You!!
nice work
Thanks!
Wow
Vidiyo
Agar diode ka rectifier bridge ho to diode value ka hoga 5ams transformer ka lia ?
brother please make more motorcycle repair videos
Bhai
Many 30amp ka battry charger bnana h so plz ap mari rahnmai Karen K market s kitny amp Ka transfermar & card lo & osy bnany Ka tarika plz btayen.
Thx
Sir me isko Direct kish class -d amp me as a power supply use kara sakte ho
Great idea. But this charger will bake your battery if you forget to stop charging on right time as this charger does not have auto cut off circuit.
VERY SIMPLE PERFORMANCE THANKS. !!!!!!!!!!
Nice video! How about doing a video of 48v battery charger with automatic cut off and protection?
Great suggestion!
Can we use it for streo
Pleeeeeeez create a full video to uses and control multimeter because I can't understand uses of multimeter plezzzzzz
Nice job.
only thing I would suggest is power button installed so ON is up and OFF is down, you have it reversed. Not a big thing, you were in a rush albeit video sped up during the assembly.
The simplest way to ensure that a battery charger is never overloaded including shorting the output leads is to add a 12V car light bulb (s) of a suitable wattage. I used 2 x 60W (10A) bulbs in parallel on a 9A (yes it should be a 10A transformer). I have run it shorted out for an hour and nothing got too hot. I have a PC fan running in a vented case. Looks evil at night. You can also use different wattage bulbs to limit the current for smal er batteries. WARNING BULBS GET HOT. Nice simple video.
Nice
Thanks!
Why are you bothering with a smoothing capacitor? You're putting what's effectively a huge capacitor (a lead-acid battery) across the output anyway! My commercial battery charger for my car generates an unsmoothed full-wave rectified waveform (I checked with an oscilloscope) and does the job just fine. Save expense and soldering and miss out the capacitor.
Good
hi..Is this charger suitable for charging a 12 volt lithium-ion battery .. 40 amps assembled from used laptop batteries?
nicc vido
Good power supply
40ah battery charger banao plzz 12 or 24 v ka
please release a video of servicing a generator
There is no cut out circuit installed for battery overcharging protection.
i used it for 100A bsttery ?
mere pass 36amp ki car battery hai ye usko bhi charge kar dega kya Plz reply jaldi karna....
Nice video
Só faltou um resistor de 5 ohms em série pra limitar e proteger o carregador de uma simples pane na bateria....
Nice work. Thanks
tanx
I am from Indonesia, if I want to make battery carger for the inverter because it requires a large battery current, I have to make a carger who supply the current to the large battery how much ampere, travo I use for fast charging 12 v battery please
Amp = ampier per hour. If your bettery is 100 amp then a 10 amp charger will take 10 hour to full charge thuritically. Low amp and Long time charge is good for ur battery.
how many amp bettery charge by this? ( high and low) plz ans me?
Can I charge 32 ah lead acid battery??
12v 5amp transformer AC or DC transformer
Good luck
Will this work well for 100 amp 12V battery. Pls explain.
Niec
Bridge rectifier diode se baba ker laga sakte hai
can i use a 14 volt transformer instead?
Sir thanks,how i collct the instrument,wht is the cost to make that.
Where this cabinets are available?
How much cost will come?
From where did you get the box
Battery aur battery charger ke beech diode lagana chahiye taaki battery ki voltage reverse transformar Ko na jaye
Thanks
over charge protection kit use kro bhai
Il led..... BOOOOOM
Oh sorry aku pikir tidak pakai fuse.... Good.
Can you please make a video on 14volt 4amp battery eliminator.
Suppose I have to make 25v 7 amp charger. What should be the rating of transformer?
Ye kitny amper tak ki battery charge kare ga.
Sir ya charger ke body kaha milage
Não se coloca capacitor eletrolítico,mas sim um resistor de 1 ohms.... aí sim...
merko 12v,9amp ka charger banake dikhao sir
Take 12 V and 9 Amp transformer and the method is same as shown in the video. Thanks
Ye cabinet Kaha buy kiye ....?
This charger can charged 12v 9AH battery full and in how much hours?? Plzzzzz tell me
Can charge with smart phone battery?
Noooooooooooooooooo! Don't charge smart phone batteries with this charger!!
thank
Electrical & Electronics Projects.
Will this charge well 100 amp x 12V battery well?
NOOOOOooooo phone batteries are less than 5 volts, you would fry the phone and battery could explode
Can This charger charge 9 amp or 12 amp battery
good job
Thank You!
you're welcome
Akü şarj aleti yaparken asla kondansatör kullanılmamalı aküya tarbeli votaja ihtiyaç var
Can you charge a 12 volt 7 ah battery with this thing?
Yes.
Rather, NOT at any battery! Its 19v. Psu not a charger
nic
Upto how much Amperes batteries can be charged with this charger ? What is the rating of the fuse ?
Esme lagne wale saman ko Kya kahte he bhai
job great, video👾
nic
bro so sweet
Thanks!
Connect wires mechanically prior to soldering. Use the right size of heat shrink. The one you are using is too wide.
I have two 6V (4.5AH) batteries.I attached them in series with output of 12.30V. I want to charge them combined in series with 12V ( 2.5A) charger.
Does it work for me?
How much time it will take to fully charge the batteries?
Please suggest me better options?
It will work but will take more time.If you had have a 12v 5 to 6 Amps charger that would be better to fully & quickly charge those batteries.Thanks!
Y lo caliente k se ba poner el tranfornador con k se lo quitas ni un culer le pones la riegas.
I think the fuse connection should be interchange to avoid electrical shock.
voltage controller should be used to charge different batteries
trafo microondas 160ah ;)
nc
What is the price of bridge rectifier in Pakistan?
sir, these are not more than 5 to 10 Rs in India
Microtek 700 inverter can charge 80 ah battery?
Screw terminal kaha c kharide he link send karo bahi
In this if you can add auto cut so that battery will not get overcharged and a fan to dessipate heat would be better.Regards
onek vali