How to fix your Headphones by replacing 3.5 mm stereo Connector
Vložit
- čas přidán 20. 08. 2024
- How to fix your Headphones by replacing 3.5 mm stereo Connector. How to repair Earphones/ Headphones and replace stereo 3.5 mm connector. Where to buy best 3.5mm stereo Connector.
Monetize your Clicks and Downloads: publisher.link...
• LINKVERTISE One of the...
You can help me to support my projects:
On PATREON: / 2013electronicscomputers
Affiliate links:
High quality 3.5mm connectors:
Stereo connector:
amzn.to/3V1iVNC
alii.pub/6x97ar
Stereo connector with Mic:
amzn.to/3TPJapE
alii.pub/6x97bj
Amtech FLux: amzn.to/3SzlNAq
Amthech flux: ali.pub/3fzb9x
Rosin Flux: alii.pub/6wt434
Solder: alii.pub/6wt443
Soldering Iron: alii.pub/6wt7fo
Soldering Iron Stand: alii.pub/6vnifd
Solder Wick: ali.pub/53b163
Soldering/Repair Mat:
amzn.to/3q07HIZ
alii.pub/6g41jp
Music: Topher Mohr and Alex Elena - Stalling (royalty free music)
i thought my speakers were broken at the beginning when you clipped the audio haha, clever. thank you for the tutorial I recently broke my studio headphones and could NOT afford to a new pair.
You're the best. Can't hear can't see.
Ensure that your cabling connectors, earth, red and green wiring to the new 3.5 mm plug are insulated to near the soldering join, if you do not then your audio performance will not function correctly as your wires will be touching inside the gold casing causing intermittent shorts. Remember too tin your wires and avoid cold welds.
Came here to see how to connect stereo connector. Left with an idea for a ring as well. Awesome!
the pins in these Sennheiser jacks are ridiculously small. It was the real pain in the ass, I had to solder this today and when I had screwed the enclousure, I realized that the connection was broken so I had to do this once again.
But where did you soldered microphones wire ?
To ground, left or right ??
That connector has only 3 terminals so there's no contacts for a mic. Here's pinout: ibb.co/yQBRwdR
this new connector are a hell for soldering sure its less expensive to make...
quite a bit more tricky than it looks, you need steady hands and good eyesight. I'm gonna need to get a proper magnifying glass and some decent flux as my first attempt was botched.
so the two ground wires connected together to the ground?
Yes!
I wanna see it if would work before soldering it. Is that possible? Thanks.
Just attach those wires to the terminals and hold them tight with your fingers. Then connect it to your device and check if it works. The wires inside may have PVC isolation or a special paint so make sure you cleaned it nicely.
hi, my headphones come with green and a copper wire coiled around the red one, could that be ground? thanks
I have a green, blue , red and copper cable, I assume copper is land, red is right but what about blue and green? There's mic but it is miday on the cable, not on the headset, so I guess one of them is the mic but why? Head phone only work on 1 side, always the same phone. I've welded the blue and the green on the same point and still there's only 1 phone that is working.
I'd stick the connector into any jack and turn on some music and then try to attach those wires to different terminals (without soldering) to find out a proper connection scheme.
Good video, it shows the secret to soldering is tinning both sides first. But you're crazy for soldering bare handed... get yourself a pana-vise, and some "helping hands" (alligator clips on arms).
Jesus i was thinking the same thing "get some helping hands bro"
This guy only solder the wire without explaining anything hahahaha
Hii sir .. 🙏can you suggest for me..to usefull pin .of presonus hd7 🎧 stereo headphone....buy. (Quality pin)please..
The links in the description below the video.
nice video thanks
Red cable center point me SOLD ki hai kya
Left side spiker not work
So, that's it? I'm not doing it alone. Have great speakers connected to ps4 controller but jack or end of the cable is broken.
Really frustrating!
Hello, i hope you still reply to FAQ. This 3.5mm Sennheiser male plug, does it fit into smartphone, laptop or tablet female internal connectors? I know that the standard HiFi 3.5mm jack plug DO NOT fit correctly. Please let me know. Thank you
it fits absolutely perfectly to any smartphone tablet or laptop. There are connectors with 3 and 4 terminals. The last one in case you have a Mic in your headset. All the links in the description below the video.
Plz do video on sennheiser px80 headphone jack repair.
Good but we cant use mic any more 😊
did you use the 4-terminal audio connector?
how can we connect a s20 pin earplugs with a 3.5 mm jack..?? s20 earplugs have 6 wires. I need to connect those 6 wires to 3.5 mm jack. How can i do that..??
Look for TTRS, i think that is the one your are looking for
Yeah, that's the jack my 2yo destroyed very very easily 😂
Bro I have Cosmic Byte G3300 headphone . The Jack Got Ripped Off And when I cuted the Braded Cable It has only Two wires One is green And the other Is copper and there's no Red wire. Please help
There should be at least three or four wires for speakers. There are two wires only for the mic and USB connectors. Are you sure that you have cut the right connector?
@@ElectronicsComputers yes bro
how did you soldered four wires at three points??????? i need to do the same.... PLEASE HELPPPPPPPPP......
using soldering iron
@@ElectronicsComputers i meant that you must have joined either two wires at one point or you have left joining one wire. Can you please explain as i have broken earphones and a trs jack
I want to ask sir. If 3 ring where is ground and mic? Left, right, ground, and mic. In video the ground channel is mic?
ground is the big one. # contacts only for stereo headphones. For mic you need 4 contact plug.
@t
@t
@@ElectronicsComputers yea.. i mean 4 contact plug (3 ring), i'm confuse between ground and mic channel.
i.pinimg.com/originals/4b/58/9f/4b589f6f2a795390476033df660f95b0.png
jebbush.co/wp-content/uploads/35-mm-jack-wiring-diagram-wiring-3-5-mm-jack-wiring.jpg
@@ElectronicsComputers nah that is it, i appreciate your help. Thank you so much.
where do you buy the Sennheiser connectors?
The link in the description.
My stereo plug has 3 connections but my ear buds have 4 one brown, one red, one green and one green and red. Where do i put these?
First, plug your connector somewhere and turn some music on. Next, clean a little that color paint from wires and try to connect any of them to the ground contact and another to the left or right channel. If one wire doesn't work then keep the same wire on ground and try another on left or right channel. So, you have to find two wires for left speaker and two wires for right one and the last wire will be your mic which you are not gonna use.
2013Electronics&Computers thanks for your help. But i tried everything i could, until i noticed thtat my plug wasnt the problem rather the speaker itself wasn't working.
Item not available.pls help
Can we use it without soldering
NO! I never seen such connectors.
@@ElectronicsComputers that means I want to soldier wire , without soldering I cannot use it ?
Kaha sa kharida jack
This guy about to lose a finger by the way he holds that hot soldering iron
all my fingers are still in place :)
@@ElectronicsComputers lol I'm glad dude! Just be careful!!
The factory solder jobs should be permanent. Very frustrating.
you never explained which wire goes where
at 1:01 enough information to figure out how to wire it.
My left and right sounds are not separated when playing music.
During soldering I melted the black plastics between the left and right signals of the plug/jack. Could that be the reason?
Probably, try to re solder it and if you have a multimiter check for short between left and right terminals.
@@ElectronicsComputers Thank you. By the way, I am using a 4 core cable. I used 2 wires for the ground and 2 for the signal. Is that okay?
Yes, absolutely right. Each speaker has its own ground wire. @@McLovin__
what is the name of that tube u used
Heat-shrink tubing
2013Electronics&Computers thanks alot
Pic 2 bad
czcams.com/video/x0Ue5X6BsH0/video.html
ek bar ye video dekho isse to bhut aasan hai
It sucks to be deaf I can never tell if my headphones are working
people come here expecting to learn which cable goes in which contact, you $*%&* Scharwzenegger