Video není dostupné.
Omlouváme se.

Raymarine C80 Radar Fix - Boat Projects

Sdílet
Vložit
  • čas přidán 11. 06. 2021
  • In this video, we take a look at why the C80 has always reported 'no scanner', find the fault and make a repair to the pins on the back of the unit.
    Our Website:
    boatingwiththe...
    Social Media:
    Facebook: / boatingbaileys
    Instagram: / boatingwiththebaileys
    CZcams: / boatingwiththebaileys

Komentáře • 11

  • @DeanCrowe1
    @DeanCrowe1 Před 3 lety

    The tip of your desolder pump is ptfe and effectively heat proof. This means you can push the tip right up against the joint and the iron just before pushing the button. On old boards it’s best to “tin” or apply a little solder to your iron tip then wipe on a damp sponge to clean prior to touching the joint. This will encourage the solder to melt easier because of the flux in the solder. You can buy flux paste/gel which will also assist in allowing the solder to reflow. Hope this helps.

  • @raincity1295
    @raincity1295 Před 3 lety +1

    Nice accent. Liked and subscribed.

  • @hobit43
    @hobit43 Před rokem

    very good, I love soldering, but I am also not very good at it.

  • @anselmopereira4880
    @anselmopereira4880 Před 2 lety

    Hello friend, your class is very good, I have one of these radars, the SL70c does not turn on, vice have any information to help me?

    • @BoatingwiththeBaileys
      @BoatingwiththeBaileys  Před 2 lety

      Hi, the Sl70c doesn’t power on or the radar attached does not power up?

    • @nathanjones3429
      @nathanjones3429 Před rokem +1

      I'm dealing c80 with a no scanner and no data. Voltage is there in the radar itself at least the DC power in is reading 12. The power switch has continuity. All the pins in the back are there. But the radar won't power up and spin and it's saying no scanner and no data. When I scroll the diagnose mode it says no scanner and the software version is 0.0. I am perplexed. This is my first experience with these. Any input would be valuable. Does it need a new card?

    • @BoatingwiththeBaileys
      @BoatingwiththeBaileys  Před rokem

      The card in the back of the c80 is one of the other common failure issues. Do you get values close to these from the c80 end and the cable connected to the scanner? forum.raymarine.com/attachment.php?aid=3890

    • @nathanjones3429
      @nathanjones3429 Před rokem

      @@BoatingwiththeBaileys I will test it next time I go back. I'm down sick right now. I didn't know about the card in the back.

    • @BoatingwiththeBaileys
      @BoatingwiththeBaileys  Před rokem

      The card can be replaced. Let us know how you get on and hope you feel better soon 👍⛵️