This is one of the easiest videos to follow! You make it look so easy compared to half the guys on youtube! (Even showed an alternate way to get the wiper blades off) I'll be referencing this video once I get the part:)
I just replaced the module on my 06 Trailblazer. I used the hammer and wrench trick to get the wiper arms off of the splines and it worked great! No puller needed. The job was very easy, took me about a half hour. Thanks for the excellent video, this made the job simpler than I thought it would be. By the way, you can get those plastic clips at any auto parts store in the "help" section where they stock clips and fasteners common to many GM models. I had some I bought for replacing the wheel well liner on my Cadillac so all I did was use the extra ones I had to replace the old ones I broke getting the cowl cover off.
That is so great to hear! Glad it went easily for you and you had good luck getting the wiper arms off. And thank you for the plastic clip info! I’ve never even noticed them in the store 🙈
You are a wonder! Couldn't get my vehicle inspected without this! Thanks a million, and saving me big bucks I would have had to pay the con-artist auto dealers in South Texas to do this.
Thanks for this video. I tried watching several but came back to this one because it seemed complete and had the information I was looking for. I changed my uncles pulse board in better than half the time it would have taken to figure all this out.
thanks for showing all the steps and find details of the job.. you make it alot easier to do the job..all your videos are quite helpfull to.i have a 2006 chevy trailblazer and repair jobs cost a fortune on it when taken to a mechanics garage.
Where can I get the clips you said you were not able to.save and what are they called.. BTW, you have the best explanation of literally every video I've watched on this
You can get replacement clips at any parts store, but I'm not sure exactly what they are called or what the part number is. I didn't replace the ones I broke and it seems to be fine without them! You could take the broken ones with you to the store after putting it back together to make sure you get the right thing. Also, thank you so much!!
You don't have to keep hitting the wiper post with a hammer until it breaks free,you could be there all day.A couple of good shots with a hammer and you should be able to wiggle it free.Soak it with WD or similar product 1st definitely makes it easier.I have never used a puller tool and I have done many of these.
Ana, my windshield wipers dont change the intermitend speed, keep the same speed, the maximum speed is fine and as soon as I activate the switch for intermitence also the pump works. What do you think? thanks for your attention.
ANNA O, I TRULY APPRECIATE YOUR APPROACH AND TECHNIQUE ON THE REPLACEMENT OF A PULSE BOARD ON A WINDSHIELD WIPER SYSTEM. YOU WOULD BE A GREAT INFORMATIONAL INSTRUCTOR. THANK YOU AGAIN, YOUR VIDEO WAS BEAUTIFUL!!! PAUL T. H. CINCINNATI, OHIO
Anna great vid do you possibly remember what the brand or product number of the replacement board I've found a couple different ones my truck is a '06 so I'm thinking possibly the same unit that you used in your video? Thanks again Cheers
Yes! From my Amazon purchase history, it is an ACDelco part number 19120931. The price has more than doubled from a little over 2 years ago. Check out the prices on Rock Auto too. Looks like they have remanufactured options for the whole windshield wiper motor and linkage assembly that are less expensive than just the pulse board.
No auto parts place has these pulse board. I went to ever parts place I know of. You can buy the wiper motor with the pulse board attached cheaper than the pulse board by it's self. Auto Zone can get an AC Declo, new in the box. NOT remanufactured. O'Reily's has "" We give you the wrong part guarantee." Every time.
yeah the prices on the pulse board itself have about doubled in the last year! Maybe because of the chip shortage? Anyway, you're right about getting the motor and even the whole transmission assembly cheaper than the pulse board by itself. Last I looked, they were still available on Rock Auto. I don't think you can get it off of Amazon right now either.
@@annao4621 I paid $169,oo for the WRONG pulse board at O-Ripoff's, it took 10 days to arrive. They seldom get the right part. I have the wiper mood with the board coming. I paid $146.44 for the whole Ac Delco package.
Great video young lady. TY! My question is....I have the moister/rain sensing version of this. Will it be the pulse board or do I have to replace the entire unit? I have noticed on Rock Auto if you have the moisture or rain sensing the only choice it to replace the entire unit and not the pulse board???
Thank you! And I'm not sure, but I can help you dig! What year is yours? Are you having the same symptoms (wipers running when set to off, fluid pump works, etc)? Rock Auto has the pulse board for the 2005 listed with the description "pulse moisture sensitive w/s wiper system", which makes me think it would be fine to just replace the pulse board module rather than the whole unit.
@@annao4621 TY so much for getting back. Yes they used to shut off if i cranked the the switch back and forth from delay settings to off. eventually they would settle down and shut off. The switch is fine. I pull the fuse under the back passenger seat to get them to shut off. 2005 Envoy. I have 260K Looks brand new. I do all my own maintenance. The most fun was doing the power steering lines a marvel of a design by engineers on crack. In addition to this I have to tackle my Blower motor relay. Good time in the Northeast for all this crap to kick the bed on me.
Hi Anna! Do you by chance have a link to the pulse board? The ones I am finding are way too expensive to be considered. The ones on amazon tell me it doesnt fit my 2006.
@nick martinez you might consider replacing the whole assembly instead. Rock Auto has remanufactured ones that come with a new motor for about $70, rather than twice that price for the pulse board. Here's a link, make sure that's the right one: www.rockauto.com/en/catalog/chevrolet,2006,trailblazer,4.2l+l6,1432188,wiper+&+washer
Good job indeed! Females can do anything they set their mind to. this badass woman right here is an inspiration to ALL women and men. rock on you magnificent doyenne
This is one of the easiest videos to follow! You make it look so easy compared to half the guys on youtube! (Even showed an alternate way to get the wiper blades off) I'll be referencing this video once I get the part:)
This is awesome to hear and I'm so glad you found it helpful! Thank you for your kind words and for watching 😊 Hope your repair is quick and easy!
Great video! A lot of folks wouldn't tackle such a repair.... Two thumbs up
Thank you so much! Hopefully more folks will attempt it. It's a pretty easy job once the wiper arms are off!
I just replaced the module on my 06 Trailblazer. I used the hammer and wrench trick to get the wiper arms off of the splines and it worked great! No puller needed. The job was very easy, took me about a half hour. Thanks for the excellent video, this made the job simpler than I thought it would be. By the way, you can get those plastic clips at any auto parts store in the "help" section where they stock clips and fasteners common to many GM models. I had some I bought for replacing the wheel well liner on my Cadillac so all I did was use the extra ones I had to replace the old ones I broke getting the cowl cover off.
That is so great to hear! Glad it went easily for you and you had good luck getting the wiper arms off. And thank you for the plastic clip info! I’ve never even noticed them in the store 🙈
You are a wonder! Couldn't get my vehicle inspected without this! Thanks a million, and saving me big bucks I would have had to pay the con-artist auto dealers in South Texas to do this.
Hell yeah @john ikserak save that money 🤑 So glad it was helpful, and thank you for your kind words!
Thanks for this video. I tried watching several but came back to this one because it seemed complete and had the information I was looking for. I changed my uncles pulse board in better than half the time it would have taken to figure all this out.
That is awesome to hear! So glad it was helpful and you knocked it out without too much trouble!
Followed your directions to a tee pausing the video all along the way. Thank you so much.
thanks for showing all the steps and find details of the job.. you make it alot easier to do the job..all your videos are quite helpfull to.i have a 2006 chevy trailblazer and repair jobs cost a fortune on it when taken to a mechanics garage.
That hammer trick was awesome. Thanks.
This saved me a lot of money.
Great video !!
Thank you, lots of other videos and this one was the simplest.
Thank you for your video! Most helpful! God bless you!
So glad it was helpful! Thank you for letting me know!
This video is *chefs kiss*
Have you ever done a rear wiper on the same vehicle? 2005 Blazer
Great outstanding video. I'm gonna start mine tomorrow I gotta go get a wiper puller.
Where can I get the clips you said you were not able to.save and what are they called.. BTW, you have the best explanation of literally every video I've watched on this
You can get replacement clips at any parts store, but I'm not sure exactly what they are called or what the part number is. I didn't replace the ones I broke and it seems to be fine without them! You could take the broken ones with you to the store after putting it back together to make sure you get the right thing.
Also, thank you so much!!
Thank you Anna me and .y daughter are about to go for it and try to fix this. Thank you so much for making it so easy to understand!
@@danettaromero9793 SHE'S THE BEST! you go girls. you got this 💪💪
Super useful video! Thank you!
You don't have to keep hitting the wiper post with a hammer until it breaks free,you could be there all day.A couple of good shots with a hammer and you should be able to wiggle it free.Soak it with WD or similar product 1st definitely makes it easier.I have never used a puller tool and I have done many of these.
Wish I could give two thumbs up.
More videos please!
I hope to! There's plenty to work on 🙃
Its a good video thanks could you give me the number of the part of rhe modul please i need buy that part.
Ana, my windshield wipers dont change the intermitend speed, keep the same speed, the maximum speed is fine and as soon as I activate the switch for intermitence also the pump works. What do you think? thanks for your attention.
good job 👏
Thanks!
awesome,,tnx for video,,,,,,,,,,,
Thanks for watching and for your comment!
Thanks for the help😁
So glad it's helpful! Thank you for your comment!
ANNA O,
I TRULY APPRECIATE YOUR APPROACH AND TECHNIQUE ON THE REPLACEMENT OF A PULSE BOARD ON A WINDSHIELD WIPER SYSTEM.
YOU WOULD BE A GREAT INFORMATIONAL INSTRUCTOR.
THANK YOU AGAIN, YOUR VIDEO WAS BEAUTIFUL!!!
PAUL T. H. CINCINNATI, OHIO
Awww thank you so much @Paul Hawthorne!! I love to teach (and be taught) and that means a lot 😊
I need exact part for same year make and can find it?
Anna great vid do you possibly remember what the brand or product number of the replacement board I've found a couple different ones my truck is a '06 so I'm thinking possibly the same unit that you used in your video? Thanks again
Cheers
Yes! From my Amazon purchase history, it is an ACDelco part number 19120931. The price has more than doubled from a little over 2 years ago. Check out the prices on Rock Auto too. Looks like they have remanufactured options for the whole windshield wiper motor and linkage assembly that are less expensive than just the pulse board.
Where did you buy the pulse board
Where did you get the musler from
Where us the module sold?
No auto parts place has these pulse board. I went to ever parts place I know of.
You can buy the wiper motor with the pulse board attached cheaper than the pulse board by it's self. Auto Zone can get an AC Declo, new in the box. NOT remanufactured.
O'Reily's has "" We give you the wrong part guarantee." Every time.
yeah the prices on the pulse board itself have about doubled in the last year! Maybe because of the chip shortage? Anyway, you're right about getting the motor and even the whole transmission assembly cheaper than the pulse board by itself. Last I looked, they were still available on Rock Auto. I don't think you can get it off of Amazon right now either.
@@annao4621 I paid $169,oo for the WRONG pulse board at O-Ripoff's, it took 10 days to arrive. They seldom get the right part.
I have the wiper mood with the board coming. I paid $146.44 for the whole Ac Delco package.
Just try amazon they sell whatever part you need for a fraction of the price.
Great video young lady. TY!
My question is....I have the moister/rain sensing version of this. Will it be the pulse board or do I have to replace the entire unit? I have noticed on Rock Auto if you have the moisture or rain sensing the only choice it to replace the entire unit and not the pulse board???
Thank you! And I'm not sure, but I can help you dig! What year is yours? Are you having the same symptoms (wipers running when set to off, fluid pump works, etc)?
Rock Auto has the pulse board for the 2005 listed with the description "pulse moisture sensitive w/s wiper system", which makes me think it would be fine to just replace the pulse board module rather than the whole unit.
And if anyone else reading the comments has the answers, please share!
@@annao4621 TY so much for getting back. Yes they used to shut off if i cranked the the switch back and forth from delay settings to off. eventually they would settle down and shut off. The switch is fine. I pull the fuse under the back passenger seat to get them to shut off. 2005 Envoy. I have 260K Looks brand new. I do all my own maintenance. The most fun was doing the power steering lines a marvel of a design by engineers on crack.
In addition to this I have to tackle my Blower motor relay. Good time in the Northeast for all this crap to kick the bed on me.
Hi Anna! Do you by chance have a link to the pulse board? The ones I am finding are way too expensive to be considered. The ones on amazon tell me it doesnt fit my 2006.
@nick martinez you might consider replacing the whole assembly instead. Rock Auto has remanufactured ones that come with a new motor for about $70, rather than twice that price for the pulse board. Here's a link, make sure that's the right one:
www.rockauto.com/en/catalog/chevrolet,2006,trailblazer,4.2l+l6,1432188,wiper+&+washer
Good Job!!!...For a female!!
Good job indeed! Females can do anything they set their mind to. this badass woman right here is an inspiration to ALL women and men. rock on you magnificent doyenne
A+ 2 thumbs up An extra thumb because you're a girl..